HP 1050c Service Manual - Page 220
Paper-axis Motor Assembly
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Removal and Installation Paper-axis Motor Assembly Refer to Figure 7. WARNING Removal Switch off the printer and remove the power cord. 1. Remove the following: 1. "Right Hand Cover" see page 8-4. 2. "Service Station Assembly" see page 8-8. 2. Disconnect the Paper-axis Motor cable from position P3 PAPER MOTOR on the electronics module. 3. Disconnect the Paper-axis encoder cable from position P1 PAPER ENCODER on the electronics module. 4. Remove the two T-10 screws (item 1) securing the gear (item 2) to the right side of the roller and remove the gear. 5. Remove the four T-20 screws (item 3) securing the Paper-axis Motor Assembly (item 4) to the right hand chassis. Remove the Paper-axis Motor Assembly. 4 3 1 3 2 NOTE C607421 Figure 7: Paper-axis Motor Assembly You must perform the Accuracy Calibration (⇒ Page 5-6) after the installation of the Paper-Axis Motor Assembly. 8-12 HP DesignJets 1050C and 1055CM Printers Service Manual