HP 1050c Service Manual - Page 241
Scan-axis
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Removal and Installation Scan-axis Motor Assembly Refer to Figure 29. WARNING Removal Switch off the printer and remove the power cord. 1. Remove the following: 1. "Right Hand Cover" see page 8-4. 2. "Left Rear Cover" see page 8-24. 2. Disconnect the scan motor cable from position P3 SCAN MOTOR in the electronics module. 3. Remove the two T-15 screws (item 1) that attach the Scan-axis motor (item 2) to the Chassis. 4. Hold the Scan-axis motor at an angle, just enough so that the belt (item 3) can be taken off. 5. Remove the Scan-axis Motor from the printer. 1 1 3 2 Figure 29: Scan-axis Motor Assembly C60718 HP DesignJets 1050C and 1055CM Printers Service Manual 8-33
Removal and Installation
8-33
HP DesignJets 1050C and 1055CM Printers Service Manual
Scan-axis
Motor Assembly
Refer to Figure 29.
Removal
WARNING
Switch off the printer and remove the power cord.
1.
Remove the following:
1.
"Right Hand Cover" see page 8-4.
2.
"Left Rear Cover" see page 8-24.
2.
Disconnect the scan motor cable from position
P3 SCAN MOTOR
in the electronics module
.
3.
Remove the two T-15 screws (item 1) that attach the Scan-axis
motor (item 2) to the Chassis.
4.
Hold the Scan-axis motor at an angle, just enough so that the belt
(item 3) can be taken off.
5.
Remove the Scan-axis Motor from the printer.
Figure 29: Scan-axis Motor Assembly
C60718
1
1
3
2