HP 1200 HP LaserJet 1200 Series - User Guide - Page 171
General HPJetDirect information, Message, Description - network card
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
General HP JetDirect information Message Status Model Number Hardware Address Firmware Version Port Select Port Config Description The current state of the print server: I/O Card Ready: The print server has successfully connected to the network and is waiting for data. I/O Card Initializing: The print server is initializing the network protocols. See the status line for each protocol on the configuration page for more information. I/O Card Not Ready: There is a problem with the print server or its configuration. Note If the print server is not ready, an error code and message appears. See Error messages. The HP JetDirect print server's model number (for example, J6035A). The 12-digit hexadecimal network hardware (MAC) address of the print server that is installed in the printer or device. The manufacturer assigns this address. The firmware revision number of the print server that is currently installed in the printer. The format is X.NN.NN, where X is a letter that depends on the HP JetDirect print server model. The LAN port on the print server that has been detected for use: None: The print server is not connected to the network. RJ-45: The RJ-45 network port is connected. The link configuration of the RJ-45 LAN port on the print server: 10BASE-T HALF: 10 Mbps, half-duplex 10BASE-T FULL: 10 Mbps, full-duplex 100TX HALF: 100 Mbps, half-duplex 100TX FULL: 100 Mbps, full-duplex Unknown: The print server is in an initialization state. Disconnected: A network connection has not been detected. Check the network cables. EN Understanding the print server configuration page 169