HP 1200 HP LaserJet 1200 Series - User Guide - Page 175
TCP/IP protocol information
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
TCP/IP protocol information Message Status Host Name IP Address Subnet Mask Default Gateway Description The current TCP status: Ready: The print server is waiting for data over TCP/IP. Disabled: TCP/IP was manually disabled. Initializing: The print server is searching for the BOOTP server or trying to get the configuration file through TFTP. An additional status message might also display. Note If the print server is not ready, an error code and message displays. The host name configured on the print server. The host name might be truncated. Not Specified: No host name was specified in a BOOTP response or TFTP configuration file. NPIxxxxxx: The default name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. The Internet Protocol (IP) address assigned to the print server. This is a required entry for its operation on a TCP/IP network. During initialization, a temporary value of 0.0.0.0 displays. After two minutes, a default IP address of 192.0.0.192 is assigned, which might not be a valid IP address for your network. Not Specified: An IP address is not assigned or the value is zero. The IP subnet mask configured on the print server. During initialization, a temporary value of 0.0.0.0 displays. Depending on the configuration parameters, the print server might automatically assign a usable default value. Not Specified: A subnet mask is not configured. The IP address of the gateway used when sending packets off of the local network. You can only configure one default gateway. During initialization, a temporary value of 0.0.0.0 displays. If an IP address is not provided, the print server's IP address is used. Not Specified: A default gateway is not configured. EN Understanding the print server configuration page 173