HP 1200 HP LaserJet 1200 Series - User Guide - Page 182
Error messages, Error Code and Message, Description
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Error messages Error Code and Message Description 02 LAN ERROR - INTERNAL LOOPBACK During a self-test, the print server detected an internal loopback test error. The print server might be faulty. If the error persists, replace the print server. 03 LAN ERROR - EXTERNAL LOOPBACK The print server is incorrectly connected to your network or it is defective. Make sure that your print server is correctly attached to your network. In addition, check the cabling and connectors. 07 LAN ERROR - CONTROLLER CHIP Check the network connections. If the connections are intact, run the power-on self-test: turn the printer off and back on. If the error persists, replace the print server. 08 LAN ERROR - INFINITE DEFERRAL There is a network congestion problem. Note If the print server is not connected to the network, this error cannot occur. 09 LAN ERROR - BABBLE Check the network connections. If the connections are intact, run the power-on self-test: turn the printer off and back on. If the error persists, replace the print server. 0A LAN ERROR - NO SQE Check the network connections. If the connections are intact, run the power-on self-test: turn the printer off and back on. If the error persists, replace the print server. 0C LAN ERROR - RECEIVER OFF There might be a problem with your network cabling or the print server. Check the cabling and connectors on your Ethernet network. If you cannot find a problem with your network cabling, run the power-on self-test: remove and re-attach the power module connector on the print server. If the error persists, there is a problem with the print server. 180 Chapter 11 Troubleshooting the print server EN