HP 2133 Computer Setup - Windows Vista and Windows XP
HP 2133 - Mini-Note - C7-M 1.6 GHz ULV Manual
UPC - 884420156444
View all HP 2133 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 2133 manual content summary:
- HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 1
Computer Setup User Guide - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 2
© Copyright 2008 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. iii - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 4
iv Product notice - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 5
Table of contents 1 Starting Computer Setup 2 Using Computer Setup Navigating and selecting in Computer Setup 2 Restoring factory settings in Computer Setup 3 3 Computer Setup menus File menu ...4 Security menu ...5 System Configuration menu ...6 Index ...7 v - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 6
vi - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 7
selections. NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled. To start Computer Setup, follow these steps: 1. Turn on or restart the computer. 2. Before Windows® opens and while the "F10=ROM Based Setup" message is displayed in the - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 8
Setup" message is displayed in the lower-left corner of the screen. Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation to select File > Ignore changes and exit. Then follow the instructions on the screen. ● To save your preferences and exit Computer Setup, use - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 9
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save changes and exit. Then follow the instructions on the screen. Your preferences go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 10
for the computer and the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Replace the configuration settings in Computer Setup with the original factory settings. (Password settings and - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 11
Security menu NOTE: Some of the menu items listed in this section may not be supported by your computer. Select Administrator Password Change Administrator Password Password Check Password Options DriveLock Passwords Notebook hard drive password status To do this Enter, change, or delete a setup - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 12
: Notebook hard drive ◦ 3rd Boot device: Notebook Ethernet ● Swap the functions of the fn key and left ctrl key. ● Enable/disable USB legacy support. When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows operating system is not running - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 13
Index B boot options 6 boot order 6 U USB legacy support 1, 6 C Computer Setup accessing 1 File menu 4 navigating and selecting 2 restoring factory settings 3 Security menu 5 System Configuration menu 6 using 2 D DriveLock password 5 drives, boot order 6 F File menu 4 L legacy support, USB 1, - HP 2133 | Computer Setup - Windows Vista and Windows XP - Page 14
Computer Setup
User Guide