HP 2140 HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic
HP 2140 - Mini-Note - Atom 1.6 GHz Manual
UPC - 884420854753
View all HP 2140 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 2140 manual content summary:
- HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 1
HP 2133 Mini-Note PC and HP 2140 Mini-Note PC Maintenance and Service Guide - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 3
, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 4
iv Safety warning notice - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 5
only 12 Model 2140 ...13 Top components ...13 Display ...13 Keys ...14 TouchPad ...15 Front components ...16 Right-side components ...17 Left-side components ...18 Bottom components ...19 Wireless antennas ...20 3 Illustrated parts catalog Serial number location ...21 Computer major components - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 6
procedures Preliminary replacement requirements 36 Tools required ...36 Service considerations ...36 Plastic parts ...36 Cables and connectors number ...42 Computer feet ...43 Battery ...44 Keyboard ...45 Memory module ...48 Mass storage device ...49 Top cover ...52 Audio board (Model 2133 only 55 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 7
10.1-inch, SD display specifications 80 10.1-inch, HD display specifications 81 8.9-inch, WXGA display specifications 81 8.9-inch, WSVGA display specifications 83 Hard drive specifications ...84 System DMA specifications ...85 System interrupt specifications ...86 System I/O address - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 8
Requirements for specific countries and regions 111 11 Recycling Battery ...112 Display ...112 Index ...118 viii - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 9
Category Product Name Processors Chipset Graphics Panels Memory Description Model 2133 HP 2133 Mini-Note PC √ HP 2140 Mini-Note PC VIA Technology C7-M Ultra Low Voltage camera One customer-accessible/upgradable memory module slot √ Supports up to 2 GB of system RAM √ PC2-5300, 667-MHz, DDR2 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 10
-MB total system memory (2048 × 1) ● 1024-MB total system memory (1024 × 1) ● 512-MB total system memory (512 × 1) Model 2133 √ √ √ Supports 9.5-mm (2.5-inch) serial ATA (SATA) hard drives √ Supports the following SATA hard drives: ● 160-GB, 7200-rpm √ ● 160-GB, 5400-rpm √ ● 120-GB, 7200-rpm - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 11
system Serviceability Description SD/MMC Card Reader supporting Secure support (3-wire plug, supports 2-pin DC connector) 6-cell, 55-Wh Li-ion battery 3-cell, 28-Wh Li-ion battery Supports Kensington security lock HP Battery (system) Model 2133 √ √ √ √ √ √ Model 2140 √ √ √ √ √ √ 3 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 12
Category Description Hard drive Memory module Model 2133 √ √ Model 2140 √ √ 4 Chapter 1 Product description - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 13
2 External component identification Model 2133 Top components Display Item (1) (2) Component Speakers (2) Wireless antennas (2) Function Produce sound. Send and receive signals from one or more wireless devices. NOTE: The antennas are not visible from the outside of the computer. Model 2133 5 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 14
Item (3) Component Internal microphones (2) (4) Webcam (select models only) Keys Function Record sound. NOTE: If there is a microphone icon next to each microphone opening, your computer has internal microphones. ● Records and plays back webcam video. ● Includes streaming video options and - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 15
button on an external mouse. *This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Hardware and Sound > Mouse. Model 2133 7 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 16
device, such as a wireless local area network (WLAN) device, the HP Broadband Wireless Module, and/or a Bluetooth® device, is on. ● Amber All wireless devices are off. NOTE: The wireless light turns amber when the computer turns on, but all wireless devices are off. Turns the wireless feature - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 17
power source, the light stays off until the battery reaches a low battery level. Connects an AC adapter. Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Model 2133 9 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 18
jack (5) Audio-out (headphone) jack Function Connects an external VGA monitor or projector. Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 19
(2) Battery bay Service tag (4) Vents (3) Function Release the battery from the battery bay. Holds the battery. Provides the product brand and series name, serial number (s/n), and product number (p/n) of your computer. Have this information available when you contact technical support. Enable - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 20
select models only) On select computer models, at least 2 antennas send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer. or region. These notices are located in Help and Support. 12 Chapter 2 External component identification - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 21
Display Component (1) Speakers (2) (2) Internal microphones (2) (3) Webcam Description Produce sound. Record sound. NOTE: If there is a microphone icon next to each microphone opening, your computer has internal microphones. Records audio and video, and captures still photographs. Model 2140 13 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 22
Keys Component (1) esc key (2) fn key (3) Function keys (4) Embedded numeric keypad keys Description Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Execute frequently - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 23
mouse. Moves the pointer and selects or activates items on the screen. Scrolls up or down. Functions like the right button on an external mouse. Model 2140 15 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 24
area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. NOTE: The wireless light turns amber when the computer turns on, but all wireless devices are off. Turns the wireless feature on or off, but does not create a wireless connection. NOTE: To establish - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 25
source, the light stays off until the battery reaches a low battery level. Connects an AC adapter. Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Model 2140 17 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 26
) jack (5) Audio-out (headphone) jack Description Connects an external VGA monitor or projector. Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 27
latches (2) (3) Service tag (4) Vents (4) Description Holds the battery. Release the battery from the battery bay. Provides the product brand and series name, serial number (s/n), and product number (p/n) of your computer. Have this information available when you contact technical support. Enable - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 28
antennas On select computer models, at least 2 antennas send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer. NOTE: For or region. These notices are located in Help and Support. 20 Chapter 2 External component identification - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 29
3 Illustrated parts catalog Serial number location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer. Serial number location 21 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 30
8.9-inch, WXGA display assemblies for use with model 2133 (include 2 microphones, 2 speakers, and 2 WLAN antenna transceivers and cables) For use only with computer models equipped with a camera module 483384-001 For use only with computer models not equipped with a camera module 482278-001 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 31
module and system boards with the 498309-001 following spare part numbers: 498308-001, 500754-001, and 500755-001 For use only with computer models not equipped with camera module and system boards with 500459-001 the following spare part numbers: 498308-001, 500754-001, and 500755-001 Keyboards - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 32
(includes power on switch board and cable, TouchPad board and cable, and wireless on/off switch board and cable) For use only in model 2133 For use only in model 2140 Audio board For use only in computer models with WXGA displays Fan/heat sink (includes replacement thermal material) For use only in - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 33
-001 498308-001 500754-001 For use only in model 2140: ● Equipped with 1.6-GHz processor 511745-001 RTC battery (12a) For use only in model 2133 468824-001 (12b) For use only in model 2140 449137-001 (13) WLAN modules Broadcom 4311AG 802.11a/b/g WLAN modules: Computer major components 25 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 34
Item Description Spare part number ● For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States 441075-001 ● For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, 441075-002 Argentina, Armenia, Aruba, Australia, Austria, - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 35
-001 For use in model 2140 511748-001 Rubber Kit (not illustrated, contains 4 computer feet) For use only in model 2133 483382-001 For use only in model 2140 511752-001 Batteries For use only in model 2133: ● 6-cell, 55-Wh Li-ion battery ● 3-cell, 28-Wh Li-ion battery 482263-001 482262-001 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 36
Bracket Kit Item Description Bracket Kit for use only in model 2133: (1) ExpressCard assembly bracket (2) USB/RJ-45 connector bracket (3) Audio/USB connector bracket Spare part number 482266-001 28 Chapter 3 Illustrated parts catalog - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 37
2140 (1) ExpressCard slot bezel (2) SD Card slot bezel (3) Bluetooth module cable ExpressCard bracket (model 2140 only; not illustrated) Hinge bracket (model 2140 only; not ilustrated) Miscellaneous parts Description 65-W HP Smart AC adapter Power cords: For use in Australia For use in Brazil For - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 38
not include a Bluetooth module cable. The Bluetooth module cable is included in the Plastics/Cable Kit, spare part number 483381-001 for model 2133, 511751-001 for model 2140. See Plastics/Cable Kit on page 29 for more Plastics/Cable Kit spare part number information. 30 Chapter 3 Illustrated parts - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 39
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe Broadcom 4311AG 802.11a/b/g WLAN module for use in Japan RTC battery for use only in model 2140 Bluetooth module for use only in Japan and Asia Pacific countries and regions NOTE: The Bluetooth module spare part kits do not - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 40
Vietnam, Yemen, Zaire, Zambia, and Zimbabwe 65-W HP Smart AC adapter RTC battery for use only in model 2133 3-cell, 28-Wh Li-ion battery for use only in model 2133 6-cell, 55-Wh Li-ion battery for use only in model 2133 Base enclosure for use only in model 2133 (includes 4 rubber feet) Top cover for - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 41
in Switzerland 482280-DD1 Keyboard for use in Iceland 482280-DJ1 Keyboard for use in Greece 483381-001 Plastics/Cable Kit for use only in model 2133 (see Plastics/Cable Kit on page 29 for more Plastics/Cable Kit spare part number information) 483382-001 Rubber Kit for use only in - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 42
System board equipped with 1.2-GHz processor only for use in model 2133 (includes ExpressCard assembly, fan/heat sink, processor, RTC battery, and replacement thermal material) 8.9-inch, WSVGA display assembly for use only with computer model 2133 equipped with a camera module and system boards with - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 43
/Cable Kit on page 29 for more Plastics/Cable Kit spare part number information) Rubber Kit for use only in model 2140 (contains 4 computer feet) Screw Kit for use only in model 2140 1024-MB memory module for use in model 2140 (PC2-5300, 667-MHz, DDR2) 2048-MB memory module for use in - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 44
and P1 screwdrivers ● Torx8 T8 screwdriver Service considerations The following sections include some of the procedures. NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away from instructions. 36 Chapter 4 Removal and replacement procedures - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 45
Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 46
may function normally for a while, then degrade in the internal layers, reducing its life expectancy. CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these precautions: Keep components in their electrostatic-safe containers until you are - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 47
material. ● Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures must directly contact dissipative surfaces, use fixtures made only of static - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 48
with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes ● Electrostatic voltage levels and - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 49
AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the real-time clock (RTC) battery (see RTC battery on page 66). 6. Wait approximately 5 minutes. 7. Replace the RTC battery and reassemble the computer. 8. Connect AC power to the computer. Do not reinsert any - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 50
when servicing the computer. Make special note of each screw size and location during removal and replacement. Serial number Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the computer. Model 2133: Model 2140 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 51
feet The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 483382-001 for model 2133, 511752-001 for model 2140. There are 4 rubber feet that are installed on the base enclosure in the locations illustrated below. On model 2133, the rubber - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 52
55-Wh Li-ion battery 3-cell, 28-Wh Li-ion battery For use only in model 2140: 6-cell, 55-Wh Li-ion battery 3-cell, 28-Wh Li-ion battery Spare part number 482262-001 482263-001 511747-001 511746-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 53
. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). Component replacement procedures 45 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 54
Remove the keyboard: 1. Remove the three Phillips PM2.0×3.0 screws that secure the keyboard to the computer. 2. Turn the computer display-side up, with the front toward you. 3. Open the computer as far as possible. 4. Lift the rear edge of the keyboard (1) until it rests at an angle, and then slide - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 55
5. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board. 6. Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 47 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 56
5300, 667-MHz, DDR2) 512-MB (PC2-5300, 667-MHz, DDR2) For use in model 2140: 2048-MB (PC2-5300, 667-MHz, DDR2) 1024-MB (PC2-5300, 667-MHz, the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the keyboard (see Keyboard on page - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 57
a bracket and SATA adapter. Description For use only in model 2133: 160-GB, 7200-rpm hard drive 160-GB, computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 58
If you have model 2133, remove the hard drive or solid-state drive: 1. Disconnect the drive cable (1) from the connector on the system board (2). 2. Remove the Phillips PM2.0×5.0 screw (1) and the two PM2.0×5.0 screws (2) that secure the drive to the computer. NOTE: The screw highlighted by callout - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 59
If you have model 2140, remove the hard drive or solid-state drive: 1. Disconnect the drive cable (1) from the connector on the system board (2). 2. Remove the two PM2.0×5.0 screws (1) that secure the rear of the drive to the computer. 3. Loosen the captive PM2.0×5.0 screw (2) that secures the front - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 60
AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the keyboard (see Keyboard caution when releasing the rubber feet to prevent damaging the feet. 3. On model 2133, remove the three Torx8 T8M2.5×10.0 screws (2) and the Torx8 T8M2 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 61
, and then lift the rear edge of the top cover (2) and swing it up and forward until it rests upside down in front of the computer. On model 2140, remove the four Phillips PM2.0×7.0 screws (1) that secure the top cover to the base enclosure, and then lift the rear edge of the - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 62
9. Disconnect the wireless on/off switch board cable (4) from the system board. 10. Remove the top cover. Reverse this procedure to install the top cover. 54 Chapter 4 Removal and replacement procedures - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 63
only for model 2133. Audio is integrated into the model 2140 system board. Description Audio board for use only in computer models with WXGA AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components: a. - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 64
3. Disconnect the audio board cables (3) from the audio board. 4. Remove the audio board. Reverse this procedure to install the audio board. 56 Chapter 4 Removal and replacement procedures - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 65
the Plastics/Cable Kit, spare part number 483381-001 for model 2133, 511751-001 for model 2140. See Plastics/Cable Kit on page 29 for more AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components: a. Keyboard - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 66
2. Disconnect the Bluetooth module cable (2) from the Bluetooth module. 3. Remove the Bluetooth module. Reverse this procedure to install the Bluetooth module. 58 Chapter 4 Removal and replacement procedures - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 67
GHz processor Equipped with 1.0-GHz processor For use only in model 2140: Equipped with 1.6-GHz processor Spare part number 482277-001 the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components: a. Keyboard - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 68
Remove the system board: 1. Disconnect the following cables from the system board: (1) Display panel cable (2) Microphone cable (3) Camera module cable (only on computer models equipped with webcam) 2. Remove the wireless antenna cables from the clips built onto the system board. 3. If you have - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 69
2140, the ExpressCard assembly bracket is included in the Plastics Kit, spare part number 511751-001. 5. If you have model 2133, go to step 6. For model 2140, remove the two Torx8 T8M2.0×6.0 screws that secure the system board and the ExpressCard assembly bracket to the base enclosure. 6. Flex the - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 70
side of the system board (3), and then swing it up and to the left until it rests upside down on the left side of the computer. 8. Disconnect the WLAN antenna cables from the terminals on the WLAN module. NOTE: The black WLAN antenna cable is connected to the WLAN module "Main - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 71
WLAN module Description Spare part number Broadcom 4311AG 802.11a/b/g WLAN modules: ● For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States 441075-001 ● For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 72
Zambia, and Zimbabwe 487330-002 Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 73
AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components: message, remove the module to restore computer functionality, and then contact technical support through Help and Support. 1. Turn the system board - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 74
to be cleared. Description RTC battery for use only in model 2133 RTC battery for use only in model 2140 Spare part number 468824-001 449137-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 75
system board and remove it from the computer. NOTE: The RTC battery is attached to the system board with double-sided tape. 4. If you have model 2140, remove the RTC battery from the socket on the system board. Reverse this procedure to install the RTC battery. Component replacement procedures 67 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 76
and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components ) d. Audio board (see Audio board (Model 2133 only) on page 55) e. System board (see System board on page 59) If you have model 2133, remove the fan/heat sink: - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 77
/heat sink (2) that contacts the processor. Replacement thermal material is included with all fan/heat sink and system board spare part kits. If you have model 2140, remove the fan/heat sink: 1. Remove the three Torx8 T8M2.0×6.0 screws (1) that secure the fan/heat sink to the system board. Component - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 78
computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 79
498309-001 8.9-inch, WSVGA display assembly for use only with computer models not equipped with camera module and system boards with the following AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components: a. - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 80
support it before removing the screws. 2. Remove the two T8M2.5×5.0 screws (2) and the four Torx8 T8M2.5×10.0 screws (3) that secure the display assembly to the computer . 3. Lift the display assembly (4) straight up and remove it. To remove the display assembly for model 2140: 1. - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 81
3. Lift the display assembly (5) straight up and remove it. Reverse this procedure to reassemble and install the display assembly. Component replacement procedures 73 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 82
when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer. NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate and make selections. NOTE: An external - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 83
of the screen. Because Computer Setup is not operating system based, it does not support the TouchPad. Navigation and selection instructions on the screen. Your preferences go into effect when the computer restarts. Restoring factory settings in Computer Setup To return all settings in Computer - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 84
Setup menus The menu tables in this section provide an overview of the Computer Setup options. NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer. File menu Select System information Restore defaults Ignore changes and exit Save changes - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 85
on system memory. System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select Language (Windows only) Boot options To do this Change the Computer Setup language. ● Set an f9, f10, and f12 delay when starting up. ● Enable/disable CD - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 86
controller ● Swap the functions of the fn key and left ctrl key. ● Enable/disable USB legacy support. When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a your operating system is not running. ◦ Startup from bootable USB devices, including - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 87
6 Specifications Computer specifications, model 2133 Metric U.S. Dimensions Depth 16.51 cm 6.50 in Width Height (front to back) Weight Equipped with a 3-cell battery, 120-GB hard drive, 1-GB memory, WLAN module, and 2 wireless antennas 25.50 cm 2.67 to 3.30 cm 1.27 kg 10.04 in 1.05 to 1. - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 88
Computer specifications, model 2140 Metric U.S. Dimensions Depth 16.60 cm 6.54 in Width Height (front to back) Weight Equipped with a 6-cell battery, hard drive Equipped with a 3-cell battery, hard drive Input power Operating voltage 26.10 cm 2.66 to 3.20 cm 10.28 in 1.05 to 1.26 in 1.35 kg - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 89
Pixel resolution Pitch Format PPI Backlight Viewing angle Metric U.S. 0.217 mm 1024 × 576 117 LED ±30° horizontal, ±10° vertical (typical) 10.1-inch, HD display specifications Dimensions Height Width Diagonal Surface Treatment Contrast ratio Refresh Rate Brightness Pixel resolution Pitch Format - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 90
Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 200 nits (typical) 0.279 × 0.279 mm 1280 × 768 RGB vertical stripe Edge lit 80 × 25 4.0 W ±40 horizontal, +20/-40° vertical (typical) 82 Chapter 6 Specifications - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 91
8.9-inch, WSVGA display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Total power consumption Viewing angle Metric U.S. 11.3 cm 19.5 cm 22.6 cm 6-bit, 262,144 300:1 (typical) 200 nits (typical) 4. - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 92
referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. 84 Chapter 6 Specifications - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 93
System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for ExpressCard DMA6 Not assigned DMA7 Not assigned *ExpressCard controller can use DMA 1, - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 94
System interrupt specifications Hardware IRQ System function IRQ0 IRQ1 System timer Standard 101-/102-Key or Microsoft® Natural Keyboard IRQ2 IRQ3 IRQ4 IRQ5* IRQ6 IRQ7* IRQ8 Cascaded Intel 82801DB/DBM USB2 Enhanced Host Controller-24CD COM1 Conexant AC-Link Audio Intel 82801DB/DBM SMBus - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 95
System I/O address specifications I/O address (hex) 000 - 00F 010 - 01F 020 - 021 022 - 024 025 - 03F 02E - 02F 040 - 05F 044 - 05F 060 061 062 - 063 064 065 - 06F 070 - 071 072 - 07F 080 - 08F 090 - 091 092 093 - 09F 0A0 - 0A1 I/O Address (hex) 0A2 - 0BF 0C0 - 0DF 0E0 - 0EF 0F0 - 0F1 0F2 - 0FF 100 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 96
Unused Secondary diskette drive controller Parallel port (LPT1/default) Unused FM synthesizer-OPL3 Unused VGA Reserved (parallel port/no EPP support) VGA ExpressCard controller in CPU Unused Internal modem "A" diskette controller Serial port (COM1/default) PCI configuration index register (PCIDIVO - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 97
System memory map specifications Size 640 KB 128 KB 48 KB 160 KB 64 KB 15 MB 58 MB 58 MB 2 MB 4 GB 64 KB Memory address 00000000-0009FFFF 000A0000-000BFFFF 000C0000-000CBFFF 000C8000-000E7FFF 000E8000-000FFFFF 00100000-00FFFFFF 04800000-07FFFFFF 04800000-07FFFFFF 08000000-080FFFFF 08200000- - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 98
and reference information for the screws and screw locks used in the computer. All screws listed in this section are available in the Screw Kit, spare part number 483383-001 for model 2133, 511753-001 for model 2140. Phillips PM2.0×3.0 screw Color Silver Quantity 3 Length 3.0 mm Thread 2.0 mm - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 99
Phillips PM2.0×5.0 screw Color Black Quantity 2 Length 5.0 mm Thread 2.0 mm Head diameter 5.0 mm Where used: 2 screws that secure the mass storage device to the computer (model 2133 is shown) Phillips PM2.0×5.0 screw 91 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 100
Phillips PM3.0×3.0 screw Color Black Quantity 5 Length 3.0 mm Thread 3.0 mm Head diameter 3.0 mm Where used (model 2140): 4 screws that secure the display assembly to the base enclosure Where used (model 2140): One screw that secures the top cover to the computer 92 Chapter 7 Screw listing - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 101
Phillips PM2.0×7.0 screw Color Black Quantity 7 Length 7.0 mm Thread 2.0 mm Head diameter 5.0 mm Where used (model 2140): 3 screws that secure the top cover to the computer Where used (model 2140): 4 screws that secure the top cover to the computer Phillips PM2.0×7.0 screw 93 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 102
Phillips PM4.5×8.0 screw Color Silver Quantity 1 Length 8.0 mm Thread 4.5 mm Head diameter 5.0 mm Where used (model 2140): One screw that secures the display assembly to the base enclosure 94 Chapter 7 Screw listing - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 103
Phillips PM2.0×8.0 screw Color Black Quantity 1 Length 8.0 mm Thread 2.0 mm Head diameter 5.0 mm Where used (model 2140): One screw that secures the display assembly to the base enclosure Phillips PM2.0×8.0 screw 95 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 104
Torx8 T8M2.0×6.0 screw Color Silver Quantity 13 (model 2133) 5 (model 2140) Length 6.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used (model 2133): One screw that secures the audio board to the system board Where used: (model 2133) 96 Chapter 7 Screw listing - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 105
bracket to the system board (3) Two screws that secure the USB/RJ-45 connector bracket to the system board Where used (model 2140): 2 screws that secure the ExpressCard assembly bracket to the system board Where used (model 2133): 5 screws that secure the fan/heat sink to the system board Where used - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 106
Torx8 T8M2.5×5.0 screw Color Black Quantity 4 (model 2133) 2 (model 2140) Length 5.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used (model 2133): One screw that secures the mass storage device to the computer 98 Chapter 7 Screw listing - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 107
Where used (model 2140): One captive screw that secures the mass storage device to the computer Where used: One screw that secures the WLAN module to the system board Torx8 T8M2.5×5.0 screw 99 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 108
Where used (model 2133): 2 screws that secure the display assembly to the base enclosure 100 Chapter 7 Screw listing - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 109
Torx8 T8M2.5×10.0 screw Color Silver Quantity 8 Length 10.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used (model 2133): 3 screws that secure the top cover to the computer Where used (model 2133): One screw that secures the top cover to the computer Torx8 T8M2.5×10.0 screw 101 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 110
Where used (model 2133): 4 screws that secure the display assembly to the base enclosure Torx8 T8M2.0×4.0 screw Color Silver Quantity 1 Length 4.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used (model 2133): One screw that secures the top cover to the computer 102 Chapter 7 Screw listing - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 111
● Scheduling automatic backups (select models only) ● Creating system restore points ● Recovering individual files ● Restoring the computer to a previous state ● Recovering information using recovery tools NOTE: For instructions on these procedures, go to Help and Support. Backing up Recovery after - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 112
, and then click Computer. NOTE: If the HP Recovery partition has been deleted, you will need to recover your operating system and programs using the Windows Vista Operating System and the Driver Recovery discs (purchased separately). For additional information, contact technical support. 3. Turn on - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 113
information NOTE: For instructions on these procedures, go to Help and Support. Backing up Recovery computer are permanently removed. The recovery process reinstalls the original operating system as well as software and drivers. Software, drivers, and updates not installed by HP must be manually - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 114
Driver Recovery disc. 7. Follow the on-screen instructions to install the drivers and programs. NOTE: For additional information about recovery tools, go to Help and Support the computer are permanently removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers that - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 115
9 Connector pin assignments Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-out (headphone) 107 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 116
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock 108 Chapter 9 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 117
RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground RJ-45 (network) 109 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 118
240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the regions must meet the requirements of the country or region where the computer is used. Requirements for all countries and regions The requirements listed - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 119
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 Korea EK 4 The - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 120
battery in general household waste. Follow the local laws and regulations in your area for computer battery Disposal. This HP product contains mercury instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 121
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 122
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 123
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. Display 115 - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 124
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 17. Remove the - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 125
18. Remove the backlight from the backlight frame. 19. Disconnect the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 126
7 TouchPad, model 2140 15 computer feet locations 43 spare part number 43 Computer Setup Diagnostics menu 77 File menu 76 navigating and selecting 75 restoring factory settings 75 Security menu 76 System Configuration menu 77 computer specifications 79 connector, power 17 connectors power 9 service - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 127
14 function 6, 14 keypad 6, 14 Windows applications 6 Windows logo 6 L labels service tag 19 latches, battery release 19 left-side components, model 2133 10 left-side components, model 2140 18 legacy support, USB 74, 78 lights battery 9, 17 drive 8, 16 power 8, 16 TouchPad 15 wireless 8, 16 M mass - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 128
1 product name 1 security 3 serviceability 3 solid-state drive 2 webcam 2 wireless 2 product name 1 product name and number, computer 19 R recovery partition 103 release latches, battery 19 removal/replacement preliminaries 36 procedures 42 right-side components, model 2133 9 right-side components - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 129
zone 7 transporting guidelines 39 wireless antennas, model 2140 20 wireless light 8, 16 wireless switch 8, 16 wireless, product description 2 WLAN module removal 63 spare part numbers 25, 31, 63 workstation guidelines 39 U unknown password 41 USB legacy support 74, 78 USB port location 9 pin - HP 2140 | HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 130
HP 2133 Mini-Note PC and HP 2140 Mini-Note
PC
Maintenance and Service Guide