HP 2200 HP LaserJet 2200 Series - User Guide - Page 103
Control Panel Error Messages, Processing, Attention
View all HP 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Processing The printer is receiving or processing data when the Ready (green) light is blinking. Pressing JOB CANCEL cancels the current job. One or two pages may print as the printer clears the print job. The printer will return to the ready state (Ready light on) after the job has been canceled. Control Panel Error Messages The following messages indicate that there is a printer error that needs attention. Some error messages will signal a secondary light message that will indicate what type of error is occurring (see Secondary Light Patterns). Attention The Attention (red) light is blinking. There are four possible causes that will display the Attention light pattern: z Paper out z Door open z Toner cartridge missing z Paper jam After the cause of the problem has been addressed, pressing GO will cause the printer to attempt to recover from the cause of the error. If the printer is unsuccessful, it will continue to display the Attention message until the cause is remedied. Pressing JOB CANCEL will cancel the print job and the printer will return to the ready state (Ready light on) unless there is a paper jam still in the printer or the toner cartridge is not in the printer. See Clearing Paper Jams if it is a paper jam. ENWW Chapter 4 Problem Solving 93