HP 2510p HP Compaq 2510p Notebook PC - Maintenance and Service Guide
HP 2510p - Compaq Business Notebook Manual
UPC - 884420098232
View all HP 2510p manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 2510p manual content summary:
- HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 1
HP Compaq 2510p Notebook PC Maintenance and Service Guide - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 2
Inc. Microsoft, Windows, and Windows Vista are either services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: June 2007 Third Edition: July 2008 Document Part - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 3
Publication date October 2009 Description The fingerprint reader board cable is included in the Cable Kit, spare part number 451722-001. The information was updated in the following locations: Illustrated parts catalog on page 18, Cable Kit on page 26, Sequential part number listing on page 29, and - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 4
iv MSG revision history - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 5
the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 6
vi Safety warning notice - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 7
...25 Cable Kit ...26 Mass storage devices ...27 Miscellaneous parts ...27 Sequential part number listing ...29 4 Removal and replacement procedures Preliminary replacement requirements 34 Tools required ...34 Service considerations ...34 Plastic parts ...34 Cables and connectors 35 Drive handling - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 8
battery ...47 WLAN module ...48 Hard drive ...52 WWAN module ...54 Optical drive ...56 Switch cover ...57 Keyboard ...59 Display assembly ...62 Top cover ...67 System board ...70 Speaker assembly ...73 Fan/heat sink assembly ...74 PC Card assembly ...76 Modem module ...78 5 Computer Setup Starting - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 9
recovery from the hard drive recovery partition 119 Backup and recovery using Windows XP 120 Creating recovery discs 120 Backing up your information 120 When to back up 121 Backup suggestions 121 Backing up specific files or folders 121 Backing up the entire hard drive 122 Creating recovery - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 10
from the hard drive 124 Initiating a recovery in Windows 125 Initiating a recovery from the hard drive recovery partition 125 Power cord set requirements Requirements for all countries and regions 130 Requirements for specific countries and regions 131 11 Recycling Battery ...132 Display - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 11
1 Product description Category Branding Processors Chipsets Graphics Panels Memory Hard drives Description ● Long name: HP Compaq 2510p Notebook PC ● Short name: HP Compaq 2510p ● Logo badge: Compaq 2510p Intel® Core™ Duo processors: ● U7600 1.20-GHz processor with 533-MHz Front Side Bus (FSB) and - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 12
● 9.5-mm tray load ● Parallel ATA ● Removable with two screws ● Supports the following optical formats: ◦ DVD±RW and CD-RW Super Multi Double-Layer Combo Drive ◦ DVD/CD-RW Combo Drive ◦ DVD-ROM Drive ● Supports no-optical-drive option with blank bezel Supports an external Universal Serial Bus (USB - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 13
, and auto detect Docking Docking support Keyboard/pointing ● Spill-resistant keyboard with embedded numeric keypad, TouchPad, pointing stick, and fingerprint devices reader ● Full-size, 19.05-mm pitch, 4.5-mm height keyboard ● One-way scrolling (vertical) ● Windows Vista™ hardware Start - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 14
Vista Home Basic (32-bit) ● Windows Vista Business (32- and 64-bit) ● Windows® XP Professional ● FreeDOS Certified: Linux End-user replaceable parts: ● AC adapter ● Battery ● Bluetooth module ● Hard drive ● Memory module ● Optical drive ● Power cord ● RTC battery ● SIM ● WLAN module ● WWAN module - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 15
switch (3) Internal microphone (4) Ambient light sensor Function Opens the computer. Turns off the display if the display is closed while the computer is on. Records sound. When activated, the sensor automatically adjusts the display brightness based on the surrounding lighting conditions - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 16
, follow these steps: ● In Windows Vista, select Start > Control Panel > System and Maintenance > Power Options. ● In Windows XP, select Start > Control Panel > Performance and Maintenance > Power Options. Launches Info Center, which enables you to open various software solutions. Turns the wireless - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 17
when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Displays the Windows Start menu. Displays a shortcut menu for items beneath the pointer. Can be used like the keys on an external numeric keypad - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 18
. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level. ● Blinking green: The hard drive or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the internal hard drive. On: Caps lock is on. - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 19
Volume mute light On: Num lock is on or the embedded numeric keypad is enabled. ● Off: Computer sound is on. ● On: Computer sound is off. closed. †The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 20
mouse. *This table describes factory settings. View or change pointing device preferences as follows: ● In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse. ● In Windows XP, select Start > Control Panel > Printers and Other Hardware > Mouse. 10 Chapter 2 External component - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 21
an external power source, the light stays off until the battery reaches a low battery level. ● Blinking green: The hard drive or optical drive is being accessed. ● Amber (select models only): HP 3D DriveGuard has temporarily parked the hard drive. Sends and receives Bluetooth device signals. WARNING - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 22
USB port. A standard USB port connects an optional USB device. A powered USB port provides power to an external device if used with a powered USB cable. Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 23
Rear components Item (1) (2) Component RJ-45 (network) jack Security cable slot Function Connects a network cable. Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 24
(9) Docking connector Function Supports optional Type I or Type II PC Cards. Supports the following optional digital card formats: Secure Digital (SD) Memory Card USB device. Connects an external VGA monitor or projector. Enables airflow to cool internal components. NOTE: The computer fan starts - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 25
or projector. Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Connects an optional docking device. Right-side components - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 26
region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. Holds the hard drive. Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 27
Item (9) (10) Component Business-card holder Bluetooth module compartment (select models only) Function Holds a standard-sized business card. Contains a Bluetooth device. Bottom components 17 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 28
3 Illustrated parts catalog Serial number location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer. 18 Chapter 3 Illustrated parts catalog - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 29
components Item (1) Description Spare part number 12.1-inch, WXGA display assembly with AntiGlare (includes wireless antenna transceivers 451741-001 and cables, and microphone and cable) Display internal components: Display bezel 451733-001 Display panel cable 451735-001 Computer major - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 30
cables) Display hinges Display lid switch module Display Screw Kit Switch cover (includes LED board and cable) Keyboards (include pointing stick and pointing stick cable Switzerland Taiwan Thailand Turkey 20 Chapter 3 Illustrated parts catalog Spare part number 451736-001 451734-001 451724-001 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 31
Kit on page 25 for more Plastics Kit spare part information): 451743-001 PC Card slot bezel Memory module/WLAN module compartment cover Bluetooth module compartment cover Hard drive cover WWAN module compartment cover System boards (include thermal material and alcohol pad) Equipped with - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 32
Item Description Spare part number ● For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina, 441530-002 Armenia, Aruba, Australia, Austria Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and 441075-001 the United States 22 Chapter 3 Illustrated parts catalog - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 33
Item Description Spare part number ● For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, 441075-002 Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 34
for use in Thailand 448675-004 RTC battery 451716-001 Memory modules (667-MHz, PC2-5300, 1-DIMM) 2048-MB 451739-001 1024-MB 451738-001 512-MB 451740-001 Bluetooth module (includes Bluetooth module cable) 451721-001 Hard drives (include hard drive bracket and connector) 100-GB, 4200-rpm - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 35
Plastics Kit Item Description Spare part number Plastics Kit: (1) Bluetooth module compartment cover (includes 1 captive screw, secured by a C-clip) (2) Hard drive cover (includes 2 captive screws, secured by C-clips) 451743-001 (3) Memory module/WLAN module compartment cover (includes 2 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 36
Cable Kit Item Description Cable Kit: (1) Bluetooth module cable (2) Fingerprint reader board cable (3) Modem cable (4) LED cable (5) Capacity board cable Spare part number 451722-001 26 Chapter 3 Illustrated parts catalog - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 37
65-watt AC adapter (HP Smart Adapter) HP 2400 Ultra-Light Docking Station HP 2500 Ultra-Light Docking Station External MultiBay II External MultiBay II power cable and stand HP Extended Life Battery Label Kit MultiBay 8X DVD-ROM Drive MultiBay 24X DVD/CD-RW Combo Drive Spare part number 451727-001 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 38
Description Nylon carrying case USB 1.1 diskette drive Power cords: For use in Argentina For use in Australia screw ● Torx T8M2.5×4.0 screw ● Torx T6M2.0×5.0 screw 28 Chapter 3 Illustrated parts catalog Spare part number 325814-001 359118-001 394279-D01 394279-011 394279-201 394279-081 394279-021 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 39
AD1 3-wire power cord for use in South Korea 394279-BB1 3-wire power cord for use in Israel 394279-D01 3-wire power cord for use in Argentina 394279-D61 3-wire power cord for use in India 412786-001 65-watt AC adapter (HP Smart Adapter) 412787-001 HP 2400 Ultra-Light Docking Station 441075-001 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 40
Spare part number 441082-001 441082-002 441082-003 441082-291 441086-001 441086-002 441086-003 441086-291 441090-001 441090-002 441090- Broadcom WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States 30 Chapter 3 Illustrated parts catalog - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 41
cable) Cable Kit (see Cable Kit on page 26 for more Cable Kit spare part number information) Top cover (includes TouchPad and fingerprint reader board) NOTE: The fingerprint reader board cable is included in the Cable Kit, spare part number 451722-001. Display lid switch module DVD/CD-RW Combo Drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 42
Drive DVD±RW and CD-RW Double-Layer Combo Drive 60-GB, 4200-rpm hard drive (includes hard drive bracket and connector) 80-GB, 4200-rpm hard drive (includes hard drive bracket and connector) Fan/heat sink assembly (includes thermal material) Label Kit Display bezel Display hinges Display panel cable - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 43
and Finland 451748-BA1 Keyboard for use in Slovenia 451748-BB1 Keyboard for use in Israel 451748-DD1 Keyboard for use in Iceland 453504-001 100-GB, 4200-rpm hard drive (includes hard drive bracket and connector) 455157-001 HP 2500 Ultra-Light Docking Station Sequential part number listing 33 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 44
the work area to prevent damage. Plastic parts Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. 34 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 45
cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily. Drive handling CAUTION: Drives are fragile components that must be - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 46
power to alter device work perfectly throughout a normal cycle. Or the device may function normally for a while, then degrade in the internal layers, reducing its life expectancy. CAUTION: To prevent damage to the computer when you are removing 5,000 V 36 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 47
components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations. ● Avoid contact with pins, leads, or circuitry. ● Turn off power and input signals before inserting or removing connectors or test equipment. Preliminary replacement requirements 37 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 48
Conductive tabletop workstations with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness Floor mats Voltage protection level 1,500 V 7,500 V 5,000 V 38 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 49
the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the real - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 50
different sizes, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Serial number Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 51
it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery: 1. Turn the computer upside - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 52
the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). Remove the SIM - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 53
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). Remove the Bluetooth - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 54
5. Disconnect the Bluetooth module cable from the system board (1) and from the Bluetooth module (2). 6. Remove the Phillips PM2.0×5.0 screw (1) that secures the Bluetooth module to the Bluetooth module compartment cover. 7. Remove the Bluetooth module (2) from the cover. Reverse this procedure to - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 55
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). Remove the memory module - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 56
5. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the memory module slot. Reverse this procedure to install the memory module. 46 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 57
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the memory - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 58
module CAUTION: The WLAN module and the WWAN module are not interchangeable. Description Spare part number 802.11a/b/g/n Broadcom WLAN modules: ● For use in Canada, the Cayman Islands Rico, the U.S. Virgin Islands, and the 441075-001 United States 48 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 59
Description Spare part number ● For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, 441075-002 Armenia, Aruba, Australia , the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the 441090-001 United States Component replacement procedures 49 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 60
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the memory - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 61
(3) that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) 3. Remove the WLAN module (1) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (2) to prevent incorrect installation. Reverse - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 62
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). Remove the hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 63
screws (1) that secure the hard drive connector to the system board. 6. Disconnect the hard drive connector (2) from the system board. 7. Lift the hard drive (3) straight up to remove it from the hard drive. Reverse this procedure to install the hard drive. Component replacement procedures 53 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 64
the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the SIM - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 65
(2) that secure the WWAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) 6. Remove the WWAN module (1) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch (2) to prevent incorrect installation. Reverse - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 66
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). Remove the optical drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 67
the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). Remove the switch - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 68
the keyboard. 4. Release the zero insertion force (ZIF) connector (1) to which the LED board cable is attached, and disconnect the LED board cable (2) from the connector. 5. Remove the switch cover. Reverse this procedure to install the switch cover. 58 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 69
the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the switch cover (see Switch cover on page 57). Remove the keyboard: 1. Turn the computer upside down, with the front toward you. Component replacement - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 70
edge of the keyboard (1) and slide it back until the keyboard cable (2) and pointing stick cable (3) are accessible. 6. Release the ZIF connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board. 60 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 71
bottom of the keyboard toward you. 10. If it is necessary to replace the LED board cable, disconnect the cable (1) from the low insertion force (LIF) connector (2) to which it is attached, and remove the LED board cable (3). The LED board cable is included in the Cable Kit, spare part number 451722 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 72
shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 73
-through cable. 8. Disconnect the display lid switch module cable (1) from the system board. 9. Remove the two Torx T8M2.5×7.0 screws (2) that secure the display assembly to the computer. 10. Lift the display assembly straight up and remove it (3). 11. If it is necessary to replace the display lid - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 74
is available using spare part number 451724-001. 14. If it is necessary to replace the display bezel or any of the display assembly internal components, remove the five rubber screw covers (1) and the five Torx T7M2.0×5.0 screws (2) that secure the display bezel to the display assembly. 15. Flex the - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 75
16. Remove the display bezel (3). The display bezel is available using spare part number 451733-001. 17. If it is necessary to replace the display hinges, remove the four Torx T7M2.0×5.0 screws (1) that secure the display panel to the display enclosure. 18. Remove the display panel (2). 19. Remove - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 76
20. Remove the display hinges (2). The left and right display hinges are available using spare part number 451734-001. Reverse this procedure to reassemble and install the display assembly. 66 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 77
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 78
Kit, spare part number 451744-001. (2) Five Torx T8M2.5×4.0 screws. (3) Three Torx T8M2.5×7.0 screw. 3. Turn the computer right-side up, with the front toward you. 4. Remove the three Torx T8M2.5×7.0 screws that secure the top cover to the computer. 68 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 79
of the base enclosure. 6. Release the ZIF connector (1) to which the fingerprint reader board cable is connected and disconnect the fingerprint reader board cable (2) from the system board. 7. Remove the top cover. Reverse this procedure to install the top cover. Component replacement procedures 69 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 80
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 81
PC Card slot. The second press releases the PC Card slot bezel from the PC Card slot. (The PC Card slot bezel is partially ejected from the PC Card slot.) The PC Card slot bezel is included in the Plastics Kit, spare part number 451743-001. 5. Remove the PC Card slot bezel (2). Component replacement - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 82
that secure the system board to the base enclosure. 8. Use the optical drive connector (1) to lift the left side of the system board (2) until it rests at an angle. 9. Remove the system board (3) by sliding it away from the base enclosure at an angle. 72 Chapter 4 Removal and replacement procedures - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 83
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 84
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 85
fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 86
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 87
Reverse this procedure to install the PC Card assembly. Component replacement procedures 77 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 88
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 89
4. Disconnect the modem module cable (3) from the system board. Reverse this procedure to install the modem module. Component replacement procedures 79 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 90
. NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled. To start Computer Setup, follow these steps: 1. Turn on or restart the computer. 2. Before Windows® opens and while the "F10 = ROM Based Setup" message is displayed in the lower-left - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 91
, and System Configuration menus. 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. Because Computer Setup is not Windows-based, it does not support the TouchPad - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 92
computer and the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Replace the configuration settings in Computer Setup with the original factory settings. (Password settings and security - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 93
Embedded Security System IDs Disk Sanitizer To do this Enter, change, or delete a setup password. Enter, change, or delete a power-on password. ● Enable/disable stringent security. ● Enable/disable password requirement on computer restart. ● Enable/disable DriveLock on any computer hard drive and - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 94
: ◦ Use of a USB keyboard, mouse, and hub in Computer Setup even when a Windows operating system is not running. ◦ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer or to an optional docking device (select models only - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 95
ExpressCard devices on the advanced port replicator. ● Enable/disable the 1394 port. ● Enable/disable the cardbus slot. ● Enable/disable the ExpressCard slot. ● Enable/disable the infrared port. ● Enable/disable the optical disk drive. ● Enable/disable the network controller. Computer Setup menus - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 96
, and WLAN 1.77 kg module Equipped with optical drive, 6-cell battery, and WLAN 1.63 module Equipped with optical drive, 3-cell battery, and WLAN 1.45 module Equipped with 3-cell battery and WLAN module 1.27 Input power Operating voltage Operating current Temperature 19.0 V dc @ 4.74 A - 90 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 97
well within this range of temperatures. 12.1-inch, WXGA display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 16.9 cm 26.2 cm 30 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 98
temperature 5°C to 55°C (41°F to 131°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. 88 Chapter - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 99
Combo Drive specifications Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate 24X CD-ROM 8X DVD-ROM 24X CD-R 16X CD-RW 8X DVD+R 4X DVD+RW 8X DVD-R 4X DVD-RW 2.4X DVD - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 100
DVD/CD-RW Combo Drive specifications Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate 24X CD-ROM 8X DVD 24X CD-R 24X CD-RW Transfer mode Startup time Stop time - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 101
) 0.74 µm CD < 100 ms < 175 ms Line-out, 0.7 Vrms 512 KB DVD < 125 ms < 225 ms 3600 KB/s (150 KB/s at 1X CD rate) 1500 KB/s (150 KB/s at 1X CD rate) 3600 KB/s (150 KB/s at 1X CD rate) 10,800 KB/s (1,352 KB/s at 1X DVD rate) 16.6 MB/s < 10 seconds < 3 seconds DVD-ROM Drive 91 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 102
System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller can use DMA 1, 2, or 5. - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 103
-/102-Key or Microsoft® Natural Keyboard IRQ2 IRQ3 IRQ4 IRQ5* IRQ6 IRQ7* IRQ8 Cascaded Intel 82801DB/DBM USB2 Enhanced Host Controller-24CD COM1 Conexant AC-Link Audio Intel 82801DB/DBM SMBus Controller-24C3 Data Fax Modem with SmartCP Diskette drive Parallel port System CMOS/real-time clock IRQ9 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 104
registers Unused Keyboard controller Port B Unused Keyboard controller Unused NMI enable/RTC Unused DMA page registers Unused Port A Unused Interrupt controller no. 2 System Function (shipping configuration) Unused DMA controller no. 2 Unused Coprocessor busy clear/reset Unused Unused Secondary - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 105
FM synthesizer-OPL3 Unused VGA Reserved (parallel port/no EPP support) VGA PC Card controller in CPU Unused Internal modem "A" diskette controller Serial port (COM1/default) PCI configuration index register (PCIDIVO-1) PCI configuration data register (PCIDIVO-1) System I/O address specifications 95 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 106
-00FFFFFF 04800000-07FFFFFF 04800000-07FFFFFF 08000000-080FFFFF 08200000-FFFEFFFF FFFF0000-FFFFFFFF System function Base memory Video memory Video BIOS Unused System BIOS Extended memory Super extended memory Unused Video memory (direct access) Unused System BIOS 96 Chapter 6 Specifications - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 107
7 Screw listing This section provides specification and reference information for the screws and screw locks used in the computer. All screws listed in this section are available in the Screw Kit, spare part number 451745-001, and the Display Screw Kit, spare part number 451737-001. 97 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 108
(screw is captured on the cover by a C-clip) (2) Two screws that secure the memory module/WLAN module compartment cover to the computer (screws are captured on the cover by C-clips) (3) Two screws that secure the hard drive cover to the computer (screws are captured on the cover by C-clips) (4) One - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 109
Where used: 2 captive screws that secure the hard drive bracket to the computer (screws are captured on the bracket by C-clips) Phillips PM2.0×5.0 captive screw 99 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 110
Phillips PM2.0×5.0 screw Color Black Quantity 1 Length 5.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: One screw that secures the Bluetooth module to the Bluetooth module compartment cover 100 Chapter 7 Screw listing - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 111
Phillips PM2.5×4.0 screw Color Black Quantity 6 Length 4.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: (1) Two screws that secure the WLAN module to the system board (2) Two screws that secure the WWAN module to the system board Phillips PM2.5×4.0 screw 101 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 112
Where used: 2 screws that secure the modem module to the system board 102 Chapter 7 Screw listing - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 113
Black Quantity 20 Length 7.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: (1) One screw that secures the optical drive to the computer (2) Six screws that secure the keyboard to the computer Where used: 2 screws that secure the display assembly to the computer Torx T8M2.5×7.0 screw 103 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 114
Where used: 2 screws that secure the display assembly to the computer Where used: 3 screws that secure the top cover to the base enclosure Where used: 3 screws that secure the top cover to the base enclosure 104 Chapter 7 Screw listing - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 115
Where used: 3 screws that secure the system board to the base enclosure Torx T8M2.5×7.0 screw 105 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 116
Torx T8M2.5×4.0 screw Color Black Quantity 9 Length 4.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: One screw that secures the optical drive to the computer Where used: 5 screws that secure the top cover to the base enclosure 106 Chapter 7 Screw listing - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 117
Where used: (1) One screw that secures the speaker to the base enclosure (2) Two screws that secure the fan/heat sink assembly to the base enclosure Torx T8M2.5×4.0 screw 107 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 118
Phillips PM2.0×3.0 screw Color Silver Quantity 2 Length 3.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 2 screws that secure the optical drive bracket to the optical drive 108 Chapter 7 Screw listing - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 119
Phillips PM1.5×3.0 screw Color Silver Quantity 1 Length 3.0 mm Thread 1.5 mm Head diameter 4.0 mm Where used: One screw that secures the display lid switch module to the display assembly Phillips PM1.5×3.0 screw 109 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 120
Torx T6M2.0×5.0 screw Color Black Quantity 9 Length 5.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 5 screws that secure the display bezel to the display enclosure Where used: 4 screws that secure the display panel to the display enclosure 110 Chapter 7 Screw listing - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 121
Phillips PM2.0×4.0 screw Color Silver Quantity 4 Length 4.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 4 screws that secure the display hinges to the display panel Phillips PM2.0×4.0 screw 111 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 122
Phillips PM2.0×2.0 broad-head screw Color Silver Quantity 2 Length 7.0 mm Thread 2.5 mm Heat width 7.0 mm Where used: 2 screws that secure the fingerprint reader board to the top cover 112 Chapter 7 Screw listing - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 123
Phillips PM2.0×10.0 screw Color Black Quantity 2 Length 10.0 mm Thread 2.0mm Head diameter 4.5 mm Where used: 2 screws that secure the system board to the base enclosure Phillips PM2.0×10.0 screw 113 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 124
more information than CDs, DVDs and DVDs with double-layer (DL) support reduce the number of discs required. NOTE: Read-write discs, such as CD-RW, DVD+RW, and DVD-RW, are not compatible with the HP Backup & Recovery Manager software. ● The computer must be connected to AC power during the process - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 125
external power. NOTE: Drivers, utilities, and software installed by HP can be copied to a CD or to a DVD using HP Backup & Recovery Manager. Backing up specific files or folders You can back up specific files or folders to the recovery partition on the hard drive, to an optional external hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 126
and folders, and then click Next. 5. Follow the on-screen instructions. Backing up the entire hard drive When you perform a complete backup of the hard drive, you are saving the full factory image, including the Windows® operating system, software, and all personal files and folders. NOTE: A copy of - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 127
, or monthly) or at specific events, such as at system restart or when you dock to an optional docking station (select models only). To schedule backups: 1. Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler. 2. Follow the on-screen instructions. Performing a recovery NOTE: You - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 128
2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive: ● From within Windows ● From the recovery partition 118 Chapter 8 Backup and - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 129
the on-screen instructions. Initiating a recovery from the hard drive recovery partition To initiate a recovery from the hard drive recovery partition, follow these steps: 1. Back up all personal files. 2. Restart the computer, and then press f11 before the Windows operating system loads. 3. Click - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 130
more information than CDs, DVDs and DVDs with double-layer (DL) support reduce the number of discs required. NOTE: Read-write discs, such as CD-RW, DVD+RW, and DVD-RW, are not compatible with the HP Backup and Recovery Manager software. ● The computer must be connected to AC power during the process - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 131
power. NOTE: Drivers, utilities, and software installed by HP can be copied to a CD or to a DVD using HP Backup and Recovery Manager. Backing up specific files or folders You can back up specific files or folders to the recovery partition on the hard drive, to an optional external hard drive - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 132
and folders, and then click Next. 5. Follow the on-screen instructions. Backing up the entire hard drive When you perform a complete backup of the hard drive, you are saving the full factory image, including the Windows® operating system, software, and all personal files and folders. NOTE: A copy of - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 133
-With HP Backup and Recovery Manager, you can recover your full factory image if you experience system failure or instability. HP Backup and Recovery Manager works from a dedicated recovery partition on the hard drive or from recovery discs you create. Backup and recovery using Windows XP 123 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 134
2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive: ● From within Windows ● From the recovery partition 124 Chapter 8 Backup and - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 135
the hard drive recovery partition, follow these steps: 1. Back up all personal files. 2. Restart the computer, and then press f11 before the Windows operating system loads. 3. Click a recovery option, and then click Next. 4. Follow the on-screen instructions. Backup and recovery using Windows XP 125 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 136
9 Connector pin assignments Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground 126 Chapter 9 Connector pin assignments - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 137
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock External monitor 127 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 138
RJ-11 (modem) Pin 1 2 3 4 5 6 RJ-45 (network) Signal Unused Tip Ring Unused Unused Unused Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused 128 Chapter 9 Connector pin assignments - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 139
Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground Universal Serial Bus 129 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 140
responsible for evaluation in the country or region where the power cord set will be used. ● The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or 250 V AC, as required by the power system of each country or region. ● The appliance coupler must - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 141
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW region where it will be used. 5. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 142
This section provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2). NOTE: The procedures provided in this appendix are general disassembly instructions. Specific details - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 143
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 144
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 145
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. Display 135 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 146
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 17. Remove the - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 147
the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD panel to the display rear panel. 23. Remove the LCD panel - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 148
backup files and folders 115, 121 hard drive 116, 122 modifications made to the system 117, 123 scheduling 117, 123 base enclosure, spare part number 21, 31 battery location 16 removal 39 spare part numbers 21, 31, 39 battery bay 16 battery latches 16 battery light 8, 11 Bluetooth module location 11 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 149
14, 15 docking station, spare part numbers 27, 29, 33 docking support, product description 3 drive light 8, 11 DriveLock password 83 drives boot order 84 preventing damage 35 DVD-ROM Drive precautions 35 removal 56 spare part numbers 21, 27, 32, 56 specifications 91 DVD/CD-RW Combo Drive precautions - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 150
3 power-on password 83 presentation button 6 processor, product description 1 product description audio 2 chipset 1 diskette drive 2 docking support 3 Ethernet 2 external media cards 3 graphics 1 hard drives 1 keyboard 3 memory module 1 modem module 2 operating system 4 optical drives 2 panels - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 151
83 speaker 16 speaker assembly removal 73 spare part number 21, 32, 73 specifications computer 86 display 87 DVD-ROM Drive 91 DVD/CD-RW Combo Drive 90 DVD±RW and CD-RW Combo Drive 89 hard drive 88 I/O addresses 94 interrupts 93 memory map 96 optical drive 89, 90, 91 system DMA 92 startup check 83 - HP 2510p | HP Compaq 2510p Notebook PC - Maintenance and Service Guide - Page 152
HP Compaq 2510p Notebook PC
Maintenance and Service Guide