HP 2600fx Optical Drive and Library SCSI-2 Command Reference
HP 2600fx - Optical Disk Drive Manual
View all HP 2600fx manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 2600fx manual content summary:
- HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 1
optical drive and library SCSI-2 command reference for models fx, ex and mx - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 2
Optical Drive and Library SCSI-2 Command Reference For fx, ex and mx Models Edition 4 Manufacturing Part Number: 5969-5727 December 2001 Printed in USA © Copyright 2001 Hewlett-Packard Company - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 3
in connection with the furnishing, performance, or use of this material. Revision History New editions of this manual incorporate all material updated since the previous edition. The manual printing date and part number indicate the current edition. The printing date changes when a new edition is - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 4
NOTE Typographical Conventions The following typographical conventions are used in this manual: Keycap: Menu choices and screens on the jukebox. Computer Output: Information displayed in the display window and screen menu items that you can select. Notes provide information that can be helpful in - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 5
they are used with optical drives and jukeboxes. This section does not replace the SCSI-2 Command Specifications. SCSI-2 Drive Command Set: Lists all supported SCSI commands and explains each command's structure. SCSI-2 Jukebox Command Set: Lists all supported SCSI autochanger commands and explains - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 6
Contents 1. SCSI Command Overview Optical Drive Control Through SCSI 1-2 Drive Control Commands 1-3 SCSI Bus Phases 1-3 Arbitration phase 1-3 Selection phase 1-3 Reselection phase 1-3 Information transfer phase 1-3 Data phase 1-4 Command phase 1-4 Message phase 1-4 Command Complete 00H - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 7
2-31 Mode Select Header 2-33 Read-Write Error Recovery 2-34 Disconnect-Reconnect 2-36 Caching Page 08H 2-37 Control Mode Page 0AH 2-39 Medium Types Supported Page 0BH 2-40 Vendor Unique Format Page 20H 2-42 Format Mode 03H 2-43 Vendor Unique Page 21H 2-46 Mode Page Parameter Default Values - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 8
Select Command (4CH 2-109 Parameter List Data 2-110 Log Sense Command (4DH 2-111 Supported Log Pages 00H 2-112 Mode Select (Group 2) Command (55H 2-122 Mode Sense 145 Write Long Command (DFH 2-147 3. Jukebox SCSI-2 Command Set Numerical List of Commands 3-2 Alphabetical List of Commands 3-4 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 9
Sense Parameter Data 3-47 Error Logs Table Format 3-49 Move Success Log Table Format 3-53 Force Log Data Format 3-54 Recovery Log Data Format 3-55 Drive Log Data Format 3-57 Odometer Log Data Format 3-58 Run-Time Log Data Format 3-59 Retry Log Data Format 3-61 Move History Log Data Format - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 10
Code 4H - Drive 3-74 A. Drive Error Codes Chapter Overview A-2 Drive Request Sense Command Values A-3 Drive Request Sense - Jukebox Micro-Move Error Codes B-32 Diagnostic Tests B-40 C. Field Replaceable Units (FRUs) HP Field Replaceable Units (FRUs C-2 D. Micro/Macro-Moves HP Surestore Optical - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 11
Contents x - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 12
Transfer Period Values (For 9.1 and 5.2 Gbyte Drives 1-8 Table 1-4. Offset Values (For 5.2 and 9.1 Gbyte Drives 1-9 Table 1-5. Simple Queue Tag 1-12 Table 1-6. Head of Queue Tag 1-13 Table 1-7. Ordered Queue Tag 1-13 Table 1-8. Target-Supported Status Codes 1-14 Table 2-1. Group 0 Commands - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 13
Table 2-32. Caching Page 08H 2-37 Table 2-33. Control Mode Page 0AH 2-39 Table 2-34. Queue Algorithm Modifier 2-39 Table 2-35. Medium Types Supported Page 0BH 2-40 Table 2-36. Valid Medium Type Combinations 2-41 Table 2-37. Vendor Unique Format Page 20H 2-42 Table 2-38. Format Mode 03H - Type - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 14
2-64. Received Diagnostic Results Page Codes 2-74 Table 2-65. Supported Diagnostic Pages 2-75 Table 2-66. Controller Test 81H 2-75 Table 2- Mode Descriptions (For 2.6 Gbyte Capacity Drives Only 2-100 Table 2-89. Mode Descriptions (For 9.1 and 5.2 Gbyte Capacity Drives Only). . . 2-101 Table 2- - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 15
2-110 Table 2-99. Log Select Command 2-110 Table 2-100. Log Sense Command CDB 2-111 Table 2-101. Log Sense Page Codes 2-112 Table 2-102. Supported Log Pages 00H 2-112 Table 2-103. Error Counter Page for Write Errors 02H 2-113 Table 2-104. Parameter Codes/Structure for Write Errors 2-113 Table - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 16
3-11. Inquiry Command CDB 3-14 Table 3-12. Vital Product Data Page Codes 3-15 Table 3-13. Standard Inquiry Data Format 3-15 Table 3-14. Supported Vital Product Data Pages 3-16 Table 3-15. Unit Serial Number Page 3-17 Table 3-16. Firmware Information Page 3-17 Table 3-17. Reserve Command CDB - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 17
44 Table 3-42. User Accessible Buffers and Allowed Read Modes 3-44 Table 3-43. Read Buffer Data Format When Buffer ID Set to Online Drive Repair 3-45 Table 3-44. Drive Status Definition 3-46 Table 3-45. Log Sense Command CDB 3-47 Table 3-46. Log Sense Parameter Data Available in Each Page 3-48 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 18
Tables Table 3-60. Odometer Log Data Format 3-58 Table 3-61. Run-Time Logs Data Format (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx 3-59 Table 3-62. Run-Time Logs Data Format (For the 40fx, 80ex, 125ex and 220mx models 3-59 Table 3-63. Run-Time Log Entry Format 3-59 Table 3-64. Retry Log - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 19
, EXCEPT 40fx, 80ex, 125ex, and 220mx C-2 Table C-2. Jukebox FRUs (For the 40fx, 80ex, 125ex and 220mx models C-4 Table D-1. HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx D-2 Table D-2. HP Surestore Optical Micro-Move ID Table (For models 40fx, 80ex - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 20
SCSI Command Overview 1 SCSI Command Overview Chapter 1 1-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 21
SCSI Optical Drive Control Through SCSI The optical drive can be controlled by the commands described in this document. This SCSI command set complies with ANSI X3.131-1994 standards. The role of the host computer and the target or the address of a disk is defined in the SCSI specifications as - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 22
Overview SCSI Command Overview Drive Control Commands Drive Control Commands This section describes all specifications, except command specifications of the target. The "SCSI Commands Used by the Target" are described later in this chapter. SCSI Bus Phases The target supports the following phases - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 23
out" phase to transfer data to and from the drive. Synchronous and asynchronous data transfers are supported. The data in phase allows the target to request phase sends the Command Descriptor Block (CDB) from the initiator to the drive. Message phase The message phase refers to a message in or a - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 24
SCSI Command Overview Table 1-1 SCSI Command Overview Drive Control Commands Target-Supported Messages Code (hex.) Direction Description 00H 01H 02H 03H 04H 05H 06H 07H 08H 09H 0AH 0BH 0CH 0DH 0EH 20H,21H,22H 80H-FFH - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 25
Phase by releasing BSY (Busy). Extended Message 01H This message is sent from either the initiator or the drive to indicate that the message is an extended message. The drive supports only the synchronous data transfer request (SDTR) message. An SDTR message exchange will be initiated by a SCSI - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 26
of zero indicates asynchronous mode. The initiator sets its values according to the rules above that permit it to receive data successfully. If the drive can also receive data successfully with these values (or smaller transfer period or larger REQ/ACK offset or both), it returns the same values - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 27
Control Commands Transfer Period Values (For 9.1 and 5.2 Gbyte Drives) Initiator Requested Drive Response Transfer Period Transfer Period Factor 0 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 28
is sent from the target to direct the initiator to save a copy of the present active data pointer for the currently attached logical unit. The drive may issue this message when it disconnects from the SCSI Bus during data transfer. Restore Pointers 03H This message is sent from the target to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 29
SCSI Command Overview Drive Control Commands Message Reject 07H This message is sent from either the initiator or the target to indicate that the last message was inappropriate or - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 30
Error. Linked Command Complete 0AH This message is sent from the drive to an initiator to indicate the execution of a linked command has sent. Linked Command Complete (with flag) 0BH This message is sent from the drive to an initiator to indicate the execution of a linked command (with flag bit - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 31
queued for that logical unit. The additional sense code is set to Command Cleared by Another Initiator. Queue Tag Messages (20H, 21H, 22H) The drive supports SIMPLE QUEUE TAG, HEAD OF QUEUE TAG, and ORDERED QUEUE TAG. The Queue Tag Messages consist of two consecutive bytes, Message Code (20H, 21H - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 32
(00H-FFH) The Head of Queue Tag message specifies that the I/O process be placed first in the logical unit's command queue. When the drive receives a subsequent I/O process received with a Head of Queue Tag message, the I/O process that has been already done is not interrupted. Ordered Queue Tag - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 33
Table 1-8 SCSI Command Overview Drive Control Commands Bit 2-0 These bits specify a logical unit number. message, a BUS DEVICE RESET message, or a RESET condition. The target supports the following status codes. Target-Supported Status Codes Code (hex.) 00H 02H 04H 08H 10H 14H 18H 28H Status - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 34
SCSI Command Overview SCSI Command Overview Drive Control Commands Busy 08H A busy status is returned by the target during powerup until all Queue Tag, or a Head of Queue Tag message is received and the command queue of the drive is full. The I/O process is not placed in the command queue. The - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 35
gets this message at its convenience by performing a Message Out Phase as follows: 1. If the ATN signal becomes true during a COMMAND phase, the drive enters the MESSAGE OUT phase after transferring part or all of the command descriptor block bytes. 2. If the ATN signal becomes true during a DATA - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 36
SCSI Command Overview SCSI Command Overview Drive Control Commands Unit Attention Condition A unit attention condition for a logical unit begins for each initiator for any of the following conditions: • Poweron or Reset • Disk - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 37
Used by the Target This section describes detailed functions of each program supported in the target. Entries are arranged in order of operation code. the byte and bit layout for each supported drive command. Chapter 2 contains these specific descriptions. Example Command Descriptor Block NOTE A - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 38
SCSI-2 DriDvreivCeoCmommamnadnsds 2 SCSI-2 Drive Command Set Chapter 2 2-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 39
track where the specified logical block exists 2-25 Inquiry Reads the information related to the controller and the drive unit 2-26 Mode Select Sets optical disk, drive unit, 2-31 or controller unit parameters Reserve Gains the exclusive control of 2-52 a specified logical unit 2-2 Chapter - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 40
unit, 2-54 or controller unit parameters Start/Stop Unit Starts or stops rotating the optical disk, and/or ejects the optical disk from the drive unit 2-73 Receive Diagnostic Results Requests analysis data be sent to the initiator 2-74 Send Diagnostic Requests the disk controller 2-76 to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 41
Table 2-2 SCSI-2 Drive Command Set Numerical List of Commands Group 1 and 2 Commands (10-byte command) Code Name (hex.) Description Page Number 25H Read Capacity Reads the capacity of the optical disk 2-80 28H Read Reads data from the specified 2-82 logical block address 2AH Write Writes - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 42
ECC data Writes data to the specified logical block address without using the ECC generation circuitry Clears drive resident logs and odometers Reads drive resident logs and odometers Sets optical disk, drive unit, or controller unit parameters 2-99 2-102 2-104 2-106 2-109 2-111 2-122 Chapter - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 43
Table 2-3 SCSI-2 Drive Command Set Numerical List of Commands Group 5 Commands (12-byte command) specified logical block address on rewritable disks only Write and Verify Writes data to the optical disk and then verifies the written data by checking the error correction code Verify Verifies - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 44
current command. When the command is terminated successfully, the drive returns the INTERMEDIATE/GOOD status and the LINKED COMMAND COMPLETE bit is 1. If this bit is set to 1 with the Link bit, the drive returns the LINKED COMMAND COMPLETE (WITH FLAG) message upon successful completion of the command - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 45
) Test Unit Ready Command (00H) This command determines the READY state of a drive. If the drive is in a READY state when it receives this command, it returns a GOOD status. A drive is in the READY state when the optical disk is loaded and spun up, and a read or write operation could successfully - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 46
SCSI-2 Drive Commands Table 2-5 SCSI-2 Drive Command Set Rezero Unit Command (01H) Rezero Unit Command (01H) The Rezero Unit Command is identical to the Test Unit Ready Command (see the previous - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 47
Command Set Request Sense Command (03H) Request Sense Command (03H) This command determines the specific error condition when a drive fails to complete a command and returns a CHECK CONDITION status. Sense data is preserved for the initiator until retrieved by a Request Sense Command or until the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 48
SCSI-2 Drive Commands SCSI-2 Drive Command Set Request Sense Command (03H) Table 2-7 Sense Data Format Error Code 70H or 71H Sense 14 Reserved (0) 15 SKSV Sense Key Specific Information 16 Sense Key Specific Information 17 Sense Key Specific Information 18 Internal Error Code (MSByte) - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 49
SCSI-2 Drive Command Set Request Sense Command (03H) Valid A Valid bit of 1 indicates the information field contains valid the Sense Key is set to 5-Illegal Request and the SKSV bit is set to 1, the sense key specific field is defined in Table 2-8 on page 2-13. If the Sense Key is set to 2-(Not - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 50
Commands Table 2-8 NOTE SCSI-2 Drive Command Set Request Sense Command (03H) Field Pointer Types Sense Key Field Pointer Types Byte 7 6 15 SKSV C/D (1) 16 17 5 4 Reserved (0) 3 as being in error are not necessarily the bytes that need to be changed to correct the problem. Chapter 2 2-13 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 51
Table 2-9 SCSI-2 Drive Command Set Request Sense Command (03H) Progress Indication Field Bytes Byte 7 6 5 4 3 2 1 0 15 SKSV (1) 16 17 Reserved (0) Progress Indication (MSByte)) Progress Indication (LSByte) Progress Indication The - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 52
, Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 53
(0) or Physical Sector Format (5). Has no effect on the drive. Has no effect on the drive. An Erase Control bit of 0 indicates that an erase is automatically performed before writing the data when the drive is directed to perform the certify operation by the initiator. An - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 54
and Immed fields do not contain valid information. A Disable Certification bit of 1 indicates the drive does not certify the optical disk during the format process. A DCRT bit of 0 indicates that the drive certifies the optical disk during the format process. When the FOV bit is set to 0, the DCRT - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 55
Table 2-12 Table 2-13 SCSI-2 Drive Command Set Format Unit Command (04H) Physical Sector Format Defect Descriptor Byte 7 6 5 4 3 2 1 0 0 Track Number of Defect (MSByte) 1 Track Number of Defect 2 Track Number of Defect ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 56
(07H) This command reassigns defective sectors. A defect list containing the Logical Block Addresses to be reassigned is transferred to the drive. Data in the defective sector is moved to the replacement sector. Reassign Blocks Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (07H - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 57
Table 2-16 SCSI-2 Drive Command Set Reassign Blocks Command (07H) Defect List Length The Defect List Length is the total length in bytes of the Defect Descriptors that follow. - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 58
SCSI-2 Drive Commands SCSI-2 Drive Command Set Read (Group 0) Command (08H) NOTE Table 2-17 Read (Group 0) Command (08H) This command reads data from the specified logical block address. A maximum length - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 59
NOTE NOTE SCSI-2 Drive Command Set Read (Group 0) Command (08H) When this command is used with command is used with 14X 512 or 1024 byte/sector media, setting the PBA bit will cause the drive to return a CHECK CONDITION status. The sense key/additional sense code will be set to ILLEGAL REQUEST/INVALID - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 60
, Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 61
on the disk because those media types contain >221 logical blocks. For write-once optical disks, blank checking is performed before writing data. If a written block is detected during blank checking, the drive will return a CHECK CONDITION status. The sense key/additional sense code will be set - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 62
SCSI-2 Drive Commands SCSI-2 Drive Command Set Seek (Group 0) Command (0BH) Table 2-19 NOTE NOTE Seek (Group 0) Command (0BH) This command seeks the optical head to the physical track where the specified logical block exists. Seek (Group 0) Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 63
(0) Allocation Length Reserved (0) Flag Link EVPD Page Code Allocation Length (8X and 14X only). An enable vital product data bit of 1 specifies that the drive shall return the optional vital product data specified by the page code field. An enable vital product data bit of 0 specifies that the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 64
SCSI-2 Drive Commands Table 2-21 Table 2-22 Table 2-23 SCSI-2 Drive Command Set Inquiry Command (12H) Vital Product Data Page Codes Page Code Description 00H 80H C1H Supported Vital Product Data Pages Unit Serial Number Page Unique Media ID (UMID) Page Supported Vital Product Data Pages (00H) - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 65
Media ID Bytes 3-5 9-11 Unique Media ID Bytes 6-8 The Unique Media ID Bytes 1-2 field is "HP" in ASCII. The Unique Media ID Bytes 3-5 field is a three-byte binary representation of the serial number of the drive which wrote the UMID on the media. The Unique Media ID Bytes 6-8 field is a three - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 66
WBus16 Sync Linked Rsvd Cmd SftRe (1) (0) (0) (1) (1) (0) Que (1) (0) 8-15 Vendor Identification "HP~~~~~~" (ASCII)b 16-31 Product Identification "C1113J ASCII)b ("C1113F~~~~~~~~~~" for 2.6 Gbyte capacity drives) 32-35 Product Revision Level (Current firmware version in ASCII) 36-39 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 67
Type) for the Peripheral Device Type. RMB The Removable Media Bit is set to 1 for removable optical disks. The drive only supports removable optical disks, so this bit is always 1. Device Type Modifier The drive is not using the Device Type Modifier field and will return 0. ISO, ECMA and ANSI - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 68
Set Mode Select Command (15H) Table 2-26 Mode Select Command (15H) This command sets optical disk and drive parameters for read, write, format, and erase commands. Mode Select (Group 0) Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (15H) 1 Logical Unit Number PF (1) Reserved - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 69
Table 2-27 SCSI-2 Drive Command Set Mode Select Command (15H) Mode Page Codes Page Code Page (See Table 2-32 on page 2-37) Control Mode Page (See Table 2-33 on page 2-39) Medium Type Supported (See Table 2-35 on page 2-40) Vendor Unique Format Page (See Table 2-37 on page 2-42) Vendor Unique Page - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 70
Type 2 Reserved (0) 3 Block Descriptor Length The Medium Type field shall be set to 00H (Default, only one medium type supported), 02H (Write-once medium), or 03H (Optical Reversible or Erasable medium). The Block Descriptor Length specifies the length in bytes of the block descriptor. It shall - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 71
Table 2-30 NOTE SCSI-2 Drive Command Set Mode Select Command (15H) Read-Write Error Recovery Read-Write Error Recovery Page 01H Byte 7 6 0 Reserved (0) 1 2 AWRE Rsvd (0) 3 4-7 8 9-11 5 4 3 3 1 0 Page Code (01H) Page - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 72
SCSI-2 Drive Commands SCSI-2 Drive Command Set Mode Select Command (15H) PER DTE DCR Read Retry Count Write Retry Count A Post Error bit of 1 indicates that the target reports recovered - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 73
) 11 Maximum Burst Size (LSByte) 12-15 Reserved (0) Buffer Full Ratio This field has no effect on the drive. Buffer Empty Ratio This field has no effect on the drive. Maximum Burst Size This field indicates the maximum amount of data that the target transfers during a data phase before - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 74
Table 2-32 NOTE SCSI-2 Drive Command Set Mode Select Command (15H) Caching Page 08H The caching parameters table defines the parameters that affect the bit of 1 indicates read ahead is disabled. A Read Cache Disable bit of 0 indicates read ahead is enabled. Chapter 2 2-37 SCSI-2 Drive Commands - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 75
-fetch bit is also 1, the Minimum Pre-fetch size is equal to the READ transfer length. This field does not affect the operation of the drive. Maximum Pre-fetch The default value is 1 and cannot be changed. If this bit is set to 0 by the MODE SELECT command, a CHECK CONDITION status - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 76
1 0 Reserved (0) Page Code (0AH) 1 Page Length (06H) 2 Reserved (0) 3 Queue Algorithm Modifiera Reserved 4-7 Reserved (0) a.For 9.1 and 5.2 Gbyte Capacity drives only. 0 DQue Queue Algorithm Modifier The queue algorithm modifier field specifies restrictions on the algorithm used for - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 77
2-35 SCSI-2 Drive Command Set Mode Select Command (15H) Medium Types Supported Page 0BH Medium Types Supported Page 0BH Byte 7 6 5 4 3 2 1 0 0 Reserved (0) Page Code (0BH) 1 Page Length (06H) 2 Reserved (0) 3 Reserved (0) 4 Medium Type One Supported (02H - Optical Write-once - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 78
(default) 4 Medium 02H 00H Type 1 Supported 5 Medium 03H 00H Type 2 Supported 6 Medium 00H 00H Type 3 Supported 7 Medium 00H 00H Type 4 Supported Setting 3 02H 00H 00H 00H Setting 4 03H 00H 00H 00H 00H 02H 03H Default Rewritable optical disks only Write-Once medium Rewritable - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 79
Format Page 20H Byte 7 6 5 4 3 2 1 0 0 Reserved (0) Page Code (20H) 1 Page Length (0AH) 2 Format Mode 3-11 Format Type Specific Data The drive supports Format Mode 03H and 04H. Format Mode 03H is for 650-Mbyte optical disks Format Mode 04H is for 1.3-, 2.6-, 5.2-, and 9.1-Gbyte - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 80
Table 2-38 SCSI-2 Drive Command Set Mode Select Command (15H) Format Mode 03H Format Mode 03H supports two types of format (type 0 and type 1) by setting byte 3. Format Mode 03H - Type 0 Byte 7 6 5 4 3 2 1 0 2 Format Mode (03H) 3 Type 00H 4 Size of User Band (MSByte) 5 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 81
Table 2-39 SCSI-2 Drive Command Set Mode Select Command (15H) Format Mode 03H - Type 1 Byte 7 6 5 4 3 2 1 0 2 Format Mode (03H) 3 Type 01H 4 Reserved (0) 5 Reserved (0) 6 Number of Bands (MSByte) 7 Number of Bands ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 82
Commands Table 2-40 NOTE SCSI-2 Drive Command Set Mode Select Command (15H) Format Mode 04H Byte 7 6 5 4 3 2 1 0 2 1EH), or 34 (22H). The Number of Bands for 9.1 and 5.2 Gbyte Capacity drives include 1 (01H), 16 (10H), 24 (18H), 30 (1EH), 34 (22H), 38 (26H), or 45 (2DH). Chapter - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 83
SCSI-2 Drive Command Set Mode Select Command (15H) Table 2-41 Vendor Unique Page 21H Vendor Unique Page 21H Byte 0 1 2 3 4 in the Inquiry Data indicates "Direct Access Device." A DAIR bit of 0 indicates "Optical Memory Device" in the Peripheral Device Type field in the Inquiry Data. A Disable - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 84
drive is installed in a jukebox environment. A DOM bit of 1 indicates that the drive is installed in a stand-alone environment. The DOM bit is not selectable using the Mode Select command. FWC A Force Write Calibration bit of 1 instructs the drive rear of the box. In HP's library products, this is - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 85
Table 2-42 SCSI-2 Drive Command Set Mode Select Command (15H) Mode Page Parameter Default Values The default Pre-Fetch Maximum Pre-Fetch Maximum Pre-Fetch Ceiling Que Algorithm Modifiera DQUE Medium Type 1 Supported Default Value 1 0 0 0 0 0 5 5 20H 20H 20H 1 1 0 40H 01H 01H 40H 0 0 02H 2- - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 86
Page Field Default Value 0BH Medium Type 2 Supported 03H 0BH Medium Type 3 Supported 00H 0BH Medium Type 4 Supported 00H 21H DAIR 0 21H DWR 0 21H Quick Disconnect 0 21H Force Verify 0 a.This value is for 9.1 and 5.2 Gbyte Capacity drive only. With power-on or reset and the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 87
Table 2-43 SCSI-2 Drive Command Set Mode Select Command (15H) Mode Page 20H Parameter Default Values Page Field Current Value 20H (2048 bytes/sector)b 20H Format Mode 4 20H Number of Bands 30 a.This media is for 9.1 and 5.2 Gbyte capacity drives only. b.This media is for 9.1 capacity - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 88
Command (15H) SCSI-2 Drive Commands Table 2-44 DIP Switch Definitions DIP SW S501 DIP SW S502 1 Autochanger Eject Distance Override 1 Reserved for Production 2 DAIR Enable 2 Reserved for Production 3 Reserved for HP 3 Reserved for Production 4 Reserved for HP 4 Reserved for Production - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 89
unit are rejected and result in a "Reservation Conflict" status. A Release Command sent by another initiator is ignored. 3rdPty A 3rd Pty bit of 1 indicates that the drive is reserved for the SCSI device specified in the Third Party Device ID field. 3rd Pty Device ID 3rd Pty Device ID indicates - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 90
ID Rsvd (0) Pty (0) 2 Reserved (0) 3 Reserved (0) 4 Reserved (0) 5 Reserved (0) Flag Link 3rdPty 3rd Pty Device ID A 3rd Pty bit of 1 indicates that the drive is reserved for the SCSI device specified in the Third Party Device ID field. 3rd Pty Device ID indicates identification of the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 91
Sense (Group 0) Command (1AH) Table 2-47 Mode Sense (Group 0) Command (1AH) This command is used to acquire optical disk, drive, and drive controller parameters. Mode Sense (Group 0) Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (1AH) 1 Logical Unit Number Rsvd DBD (0) (0) Rsvd - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 92
field specifies the number of bytes that the initiator has allocated for returned data. A length of 0 indicates that no data will be returned. The drive will terminate the data-in phase when the allocation length has been transferred or when all available data has been transferred to the initiator - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 93
Table 2-50 SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Mode Page Codes Page (See Table 2-53 on page 2-60) Control Mode Page (See Table 2-54 on page 2-63) Medium Type Supported (Table 2-55 on page 2-64) Vendor Unique Format Page (See Table 2-57 on page 2-66) Vendor Unique Page - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 94
Commands Table 2-51 SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Read-Write Error Recover Page Read-Write Error Recovery Page 01H Byte 7 6 0 PS (1) Rsvd (0) 1 2 AWRE Rsvd (0) 3 4-7 8 9-11 5 4 3 2 1 0 Page - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 95
SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) RC PER DTE DCR A Read Continuous bit of 1 indicates that error correction codes are not used for data - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 96
Commands Table 2-52 SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Disconnect-Reconnect Page 02H Disconnect-Reconnect Page 02H Ratio This field has no effect on the drive. Buffer Empty Ratio This field has no effect on the drive. Maximum Burst Size This field indicates the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 97
Table 2-53 SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Caching Page 08H Caching Page 08H Byte 7 6 5 4 3 2 1 0 0 PS Rsvd (1) (0) Page Code (08H) 1 Page Length (0AH) 2 Reserved (0) WCE MF - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 98
Pre-Fetch bit is also 1, the minimum prefetch size is equal to the READ Transfer Length. This field does not affect the operation of the drive. Maximum Pre-fetch The Minimum Pre-fetch default setting is 1 and cannot be changed. If this bit is set to 0 by the MODE SELECT command - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 99
Command Set Mode Sense (Group 0) Command (1AH) MaximumPre-fetch Ceiling The Maximum Pre-fetch Ceiling filed does not affect the operation of the drive and can be set to 32 or 64. In another value is set, a CHECK CONDITION status is returned with the sense key/ additional sense code - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 100
0 Reserved (0) Page Code (0AH) 1 Page Length (06H) 2 Reserved (0) 3 Que Algorithm Modifiera Reserved (0) 4 - 7 Reserved (0) a.For 9.1 and 5.2 Gbyte capacity drives only. 0 DQue The parameters of the Control Mode Page are all reserved and cannot be changed by the MODE SELECT command. PS - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 101
Two Supported (03H - Optical Erasable Medium) 6 Medium Type Three Supported (00H) 7 Medium Type Four Supported (00H) PS The Parameters Savable bit of 1 indicates this parameter page is savable in non-volatile RAM. This page is used to set the medium type(s) supported by the drive. The drive - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 102
00H 02H 03H Type 1 Supported 5 Medium 03H 00H 00H 00H Type 2 Supported 6 Medium 00H 00H 00H 00H Type 3 Supported 7 Medium 00H 00H 00H 00H Type 4 Supported 00H 02H 03H Default (rewritable optical disks only) Write-Once optical disks Rewritable optical disks Chapter 2 2-65 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 103
Length (0AH) 2 Format Mode 3-11 Format Type Specific Data PS The Parameters Savable bit of 1 indicates this parameter page is savable in non-volatile RAM. The drive supports Format Mode 03H and 04H. Format Mode 03H is for 650-Mbyte optical disks. Format Mode 04H is for 1.3-, 2.6-, 5.2-, and - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 104
Commands Table 2-58 SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Format Mode Format Mode 03H supports two types of format (type 0 and type 1) by setting byte 3. Format Mode 03H - Type 0 Byte 7 6 5 4 3 2 1 0 2 Format Mode (03H) 3 Type 00H 4 Size of User Band (MSByte - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 105
Table 2-59 SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Format Mode 03H - Type 1 Byte 7 6 5 4 3 2 1 0 2 Format Mode (03H) 3 Type 01H 4 Reserved (0) 5 Reserved (0) 6 Number of Bands (MSByte) 7 Number of - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 106
Commands Table 2-60 NOTE SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Format Mode 04H Byte 7 6 5 4 3 2 1 0 1EH), or 34 (22H). The Number of Bands for 9.1 and 5.2 Gbyte Capacity drives include 1 (01H), 16 (10H), 24 (18H), 30 (1EH), 34 (22H), 38 (26H), or 45 (2DH). - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 107
SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Table 2-61 Vendor Unique Vendor Unique Page 21H Byte 0 1 in the Inquiry Data indicates "Direct Access Device." A DAIR bit of 0 indicates "Optical Memory Device" in the Peripheral Device Type field in the Inquiry Data. DWR The DAIR - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 108
. These fields are not changeable. The switch setting value overrides the saved value. A drive operating mode of 0 indicates that the drive is installed in a jukebox environment. A DOM bit of 1 indicates that the drive is installed in a stand-alone environment. The DOM bit is not selectable using - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 109
spin-up. A Force Write Calibration bit of 0 instructs the drive to perform the Write Calibration routine on receipt of the first Write command or 5 minutes after spin-up. The bits DAIR and Force Verify on this mode page can also be controlled in HP products by changing external switch settings. In - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 110
62 NOTE Start/Stop Unit Command (1BH) This command starts or stops rotation of the optical disk in the drive and/or ejects the optical disk from the drive. Start/Stop Unit Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (1BH) 1 Logical Unit Number (0) Reserved (0) Immed 2 Reserved - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 111
SCSI-2 Drive Command Set Receive Diagnostic Results Command (1CH) Table 2-63 Table 2-64 is less. Received Diagnostic Results Page Codes Page Code 00H 81H Maximum Transfer Length 6 10 Description Supported Diagnostics Pages (See Table 2-65 on page 2-75) Controller Test (See Table 2-66 on page - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 112
Table 2-65 Table 2-66 SCSI-2 Drive Command Set Receive Diagnostic Results Command (1CH) Supported Diagnostic Pages Byte 7 6 5 4 3 2 1 0 0 Page Code (00H) 1 Reserved (0) 2 Page Length (0) (MSByte) 3 Page Length (2) (LSByte) 4 Supported Page List (00H) 5 Supported Page List (81H - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 113
Command Set Send Diagnostic Command (1DH) Send Diagnostic Command (1DH) This command initiates drive diagnostic tests. NOTE Table 2-67 Disconnect must be allowed to run diagnostic tests. Send Diagnostic Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (1DH) 1 Logical Unit Number - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 114
Commands Table 2-68 Table 2-69 SCSI-2 Drive Command Set Send Diagnostic Command (1DH) DevOfl Device Out Phase that describe the selected test. This value must be 0 if the SelfTst bit is set to 1. Supported Diagnostic Pages Byte 7 6 5 4 3 2 1 0 0 Page Code (00H) 1 Reserved (0) 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 115
Table 2-70 Table 2-71 SCSI-2 Drive Command Set Send Diagnostic Command (1DH) Controller Test Byte 7 6 5 4 4 2 1 0 0 1 2 3 4 No Break 5 Page Code (81H) Reserved Page Length (0) (MSByte) Page Length (8) (LSByte) Test Number (See Table 2- - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 116
Reserved (0) Prevent 5 Control Byte (0) Flag Link Prevent A Prevent bit of 1 prevents removal of the optical disk from a drive. A Prevent bit of 0 allows removal of the optical disk from a drive. The Start/Stop Unit Command affects this command. See Table 2-62 on page 2-73. Chapter 2 2-79 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 117
Command Set Read Capacity Command (25H) Table 2-73 Read Capacity Command (25H) This command reads the capacity of the optical disk surface in the drive. The last logical block address and block length of the medium are returned. Read Capacity Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 118
Commands Table 2-74 SCSI-2 Drive Command Set Read Capacity Command (25H) Read Capacity Command Data Byte 7 6 5 4 3 2 1 0 0 Logical Block Address (MSByte) 1 Logical Block Address 2 Logical Block Address 3 Logical Block Address (LSByte) 4 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 119
SCSI-2 Drive Command Set Read (Group 1) Command (28H) NOTE Table 2-75 NOTE Read (Group 8 Transfer Length (LSByte) 9 PBA Reserved (0) Flag Link DPO A Disable Page Out bit of 1 instructs the target not to store readahead data in cache after the read data has been transferred to the initiator. - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 120
PBA A Force Unit Access bit of 1 indicates that data is read directly from the disk. A Force Unit Access bit of 0 indicates that the drive may access the cache memory. A relative address bit of one indicates that logical block address specified is a two's complement offset from the last logical - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 121
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 122
ErsCntl The Erase Control bit is identical to the Erase Bypass bit. For write-once optical disks, blank checking is performed before writing data. If a written block is detected during blank checking, the drive will return a CHECK CONDITION status. The sense key/additional sense code will be set - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 123
(2AH) When this command is used with 14X 512 OR 1024 byte/sector media, setting the ErsCntl bit or the PBA bit will cause the drive to return a CHECK CONDITION status. The sense key/additional sense code will be set to ILLEGAL REQUEST/INVALID FIELD in CDB. 2-86 Chapter 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 124
SCSI-2 Drive Commands SCSI-2 Drive Command Set Seek (Group 1) Command (2BH) Table 2-77 NOTE Seek (Group 1) Command (2BH) This command seeks the optical head to the physical track where the specified logical block exists. Seek (Group 1) Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 125
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 126
addressing is used. A PBA bit of 0 indicates that logical block addressing is used. If this command is executed for write-once disks, the drive returns a CHECK CONDITION status with the Sense Key/Additional Sense Code set to Illegal Request/Invalid Command Operation Code. When this command is - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 127
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 128
NOTE SCSI-2 Drive Command Set Write and Verify (Group 1) Command (2EH) DPO EBP Transfer Length PBA ErsCntl Rel Adr A Disable Page Out bit of 1 instructs the target not to store the data in the cache after it has been transferred to the optical disk. A DPO bit of 0 instructs the target to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 129
SCSI-2 Drive Command Set Verify (Group 1) Command (2FH) Table 2-80 Verify (Group 1) Command (2FH) (MSByte) Verification Length (LSByte) Reserved (0) Flag Link DPO A Disable Page Out (DPO) bit of 1 instructs the target not to retain the data in the cache after it has been verified. A DPO bit of - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 130
(Group 1) Command (2FH) Blk Vfy Verification Length Rel Adr A Blank Verify bit of 1 indicates the drive verifies that sectors are erased. A Blk Vfy bit of 0 indicates the drive verifies written data integrity. The Verification Length field specifies the number of contiguous logical blocks of data - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 131
Reserved (0) Transfer Length (MSByte) Transfer Length (LSByte) Reserved (0) Flag Link Immed Transfer Length Rel Adr An Immediate bit of 1 indicates that the drive returns a status as soon as the command descriptor block is validated. An Immed bit of 0 indicates that the status is not returned - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 132
Command Set Synchronize Cache (35H) SCSI-2 Drive Commands Table 2-82 Synchronize Cache (35H) This command initiates the writing of all cached write data to the optical disk. Ensures that logical blocks in the cache memory, within the specified range, have their most recent data value recorded - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 133
SCSI-2 Drive Command Set Read Defect Data (Group 1) Command (37H) Table 2-83 Read Defect Data (Group 1) Command (37H) This command reads optical disk defect information. The data returned starts with a 4-byte header, followed by one or more defect descriptors. Read Defect Data (Group 1) Command - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 134
Table 2-84 SCSI-2 Drive Command Set Read Defect Data (Group 1) Command (37H) Defect List Format This field specifies the defect list format that is returned. Only the Physical Sector Format (5) is supported. If the Block Format (0) is specified, the defect list will be returned in Physical Sector - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 135
Table 2-85 SCSI-2 Drive Command Set Read Defect Data (Group 1) Command (37H) Physical Sector Format Defect Descriptor Byte 7 6 5 4 3 2 1 0 0 Physical Track Number of the Defect (MSByte) 1 Physical Track Number of - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 136
descriptor followed by the buffer data. If you write data to the buffer area, you may overwrite valid information that the drive needs for operation. Write Buffer Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (3BH) 1 Logical Unit Number Reserved (0) Mode (Table 2-87 on (0) page - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 137
Only) Mode Description 1 Vendor specific 4 Download microcode 0 Data retained for subsequent read buffer command Buffer RAM Indicates the data buffer space used for transfer to and from the optical disk. Download Microcode Indicates the code the drive uses to operate. Serial Number - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 138
SCSI-2 Drive Commands Table 2-89 SCSI-2 Drive Command Set Write Buffer Command (3BH) Mode Descriptions (For 9.1 and 5.2 Gbyte Capacity Drives Only) Mode Description 0 Data Mode (same as Mode 2) 1 Vendor specific 2 Data Mode 4 Download Microcode Chapter 2 2-101 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 139
Command Set Read Buffer Command (3CH) Table 2-90 Read Buffer Command (3CH) This command reads data from the drive data buffer. The transfer data consists of a 4-byte descriptor followed by the buffer data. Read Buffer Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (3CH) 1 Logical - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 140
Buffer ID Mode 0 0 Buffer RAM Indicates the data buffer space used for the movement of data to and from the optical disk. Mode Descriptions (For 2.6 Gbyte Capacity Drives Only) Mode 0 Description Data retained for subsequent read buffer command Mode Descriptions (For 9.1 and 5.2 Gbyte Capacity - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 141
SCSI-2 Drive Command Set Read Long Command (3EH) Table 2-95 Read Long Command (3EH) This command reads data starting at the specified Logical Block Address, including ECC - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 142
of 0 indicates that the logical block address is an absolute address. When this command is executed with 14X 512 or 1024 byte/sector media, the drive will return a CHECK CONDITION status. The sense key/ additional sense code will be set to ILLEGAL REQUEST/INVALID COMMAND. Chapter 2 2-105 SCSI - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 143
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 144
. A value of 0 indicates that the logical block address is an absolute address. If this command is executed for write-once disks, the drive returns a CHECK CONDITION status with the Sense Key/Additional Sense Code set to Illegal Request/Invalid Command Operation Code. Chapter 2 2-107 SCSI - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 145
NOTE SCSI-2 Drive Command Set Write Long Command (3FH) When this command is executed with 14X 512 or 1024 byte/sector media, the drive will return a CHECK CONDITION status. The sense key/ additional sense code will be set to ILLEGAL REQUEST/INVALID COMMAND. 2-108 Chapter 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 146
Command (4CH) Table 2-97 NOTE Log Select Command (4CH) This command clears drive resident logs. Log Select Command CDB Byte 7 6 5 4 3 2 1 LOG SENSE commands prior to issuing LOG SELECT commands to determine supported pages and page lengths. The ONLY capability the initiator is given - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 147
Table 2-98 Table 2-99 SCSI-2 Drive Command Set Log Select Command (4CH) Parameter List Data Parameter List Data for Byte 8 of the Log Select Command Byte 7 6 5 4 3 2 1 0 0 Page Code (Table 2-99 on - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 148
Command (4DH) This command provides a means for the initiator to manage statistical information maintained by the drive. Log Sense Command CDB Byte 0 1 2 3 4 5 6 7 8 9 7 6 PC the initiator to request parameter data beginning from a specific parameter code to the maximum allocation length or the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 149
SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-101 Table 2-102 Log Sense Page Codes Page Code Description 00H Supported Log Pages 02H Error Counter Page for Write Errors (See Table 2-103 on page 2-113) 03H Error Counter Page for Read Errors (See Table 2-105 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 150
SCSI-2 Drive Commands SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-103 Table 2-104 Error Counter Page for Write Errors 02H Byte 7 6 5 4 3 2 1 0 0 Rsvd (0) Page Code (02H) 1 Reserved (0) 2 Page Length (n-3) ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 151
SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-105 Table 2-106 Error Counter Page for Read Errors 03H Byte 7 6 5 4 3 2 1 0 0 Rsvd (0) Page Code (03H) 1 Reserved (0) 2 Page Length (n-3) ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 152
SCSI-2 Drive Commands SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-107 Table 2-108 Error Counter Page for Verify Errors 05H Byte 0 1 2 3 4 5 6 7 8 n 7 6 5 4 3 2 1 0 Rsvd (0) Page Code (05H) Reserved (0) Page Length (n-3) ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 153
SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-109 Last N Error Events Page 07H Byte 7 6 5 4 3 2 1 0 0 Rsvd (0) Page Code (07H) 1 Reserved (0) 2 Page Length (n-3) (MSByte) 3 Page Length (n-3) (LSByte) 4 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 154
for Last N Error Events Page Parameter Length Pointer Bytes Description 0 10 Number of Events in the Log (Maximum Events = 50 or 250 for 9.1 Gbyte Drives) 1 34 Most Recent Error Event Log (See Table 2-109 on page 2-116 or Table 2-111 on page 2-118) 2 34 Next Most Recent Event (See - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 155
SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-111 Error Event Log Byte 7 6 5 4 3 2 1 0 0 Log Type (1-read, 2-write, 3-erase, 4-verify, 5-blank check, 6-spin-up error, 7-loading error, 8- - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 156
Table 2-111 Table 2-112 SCSI-2 Drive Command Set Log Sense Command (4DH) Error Event Log Byte 7 6 5 4 3 2 1 0 21 Logical Block Address (LSByte) 22 Physical Block Address (MSByte) 23 Physical Block Address 24 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 157
SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-113 Table 2-114 Parameter Codes/Structure for Erase Errors Param. Code 1 2 3 5 6 0 Length Bytes 12 12 12 14 12 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 158
SCSI-2 Drive Commands SCSI-2 Drive Command Set Log Sense Command (4DH) Table 2-115 Parameter Codes/Structure for Blank Check Errors Param. Code Length Bytes Description 1 12 Sectors Corrected with Retries 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 159
Command Set Mode Select (Group 2) Command (55H) Table 2-116 Mode Select (Group 2) Command (55H) This command sets optical disk, drive unit, or controller unit parameters. Mode Select (Group 2) Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (55H) 1 Logical Unit Number PF Reserved - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 160
of the MODE SELECT parameter list that the initiator will transfer to the drive during the DATA OUT phase. A length of 0 indicates that no data to 00H (default, only one medium type supported), 02H (write-once optical disks) or 03H (optical reversible or erasable medium). Block Descriptor Length - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 161
3 Number of Blocks (LSByte) 4 Reserved (0) 5 Block Length (MSByte) 6 Block Length 7 Block Length (LSByte) All fields in the Block Descriptor have no effect on the drive. Refer to "Mode Sense (Group 0) Command (1AH)" on page 2-54 for detailed information on each page. 2-124 Chapter 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 162
Command Set Mode Sense (Group 2) Command (5AH) SCSI-2 Drive Commands Table 2-119 Mode Sense (Group 2) Command (5AH) Mode Select (Group 2) Command CDB will be returned. This condition is not considered an error. The drive will terminate the data in phase when the allocation length has been - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 163
data to follow. Medium Type The Medium Type field is set to 00H (default, only one medium type is supported), 02H (write-once optical disks), or 03H (rewritable optical disks), depending on the drive condition (00H if no disk or not ready, and 02H or 03H if it is ready to access the disk - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 164
Table 2-121 NOTE SCSI-2 Drive Command Set Mode Sense (Group 2) Command (5AH) Cache The Cache bit of 1 indicates that caching is supported. PS The Parameters Savable bit of 1 indicates this parameter page is savable in non-volatile storage. Block Descriptor Length The Block Descriptor - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 165
SCSI-2 Drive Command Set Read (Group 5) Command (A8H) NOTE Table 2-122 Read (Group 5) Command (A8H) This command reads data from the specified logical block address. The Mode - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 166
instructs the target it may store readahead data in the cache after the read data has been transferred to the initiator. The DPO bit is ignored in 9.1 and 5.2 Gbyte capacity drives logical block addressing is used. For Write-Once optical disks, blank checking is performed following a failed read - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 167
NOTE SCSI-2 Drive Command Set Read (Group 5) Command (A8H) When this command is used with 14X 512 or 1024 byte/sector media, setting the PBA bit will cause the drive to return a CHECK CONDITION status. The sense key/additional sense code will be set to ILLEGAL REQUEST/INVALID FIELD in CDB. 2-130 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 168
Set Write (Group 5) Command (AAH) SCSI-2 Drive Commands NOTE Table 2-123 NOTE Write (Group 5) Command (AAH) 11, Bit 7 and Bit 6 are reserved (0). DPO . A Disable Page Out bit of 1 instructs the target not to store the data in the cache after it has been transferred to the media. A DPO bit - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 169
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 170
sense code will be set to ILLEGAL REQUEST/INVALID FIELD in CDB. For write-once optical disks, blank checking is performed before writing data. If a written block is detected during blank checking, the drive will return a CHECK CONDITION status. The sense key/additional sense code will be set to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 171
SCSI-2 Drive Command Set Erase (Group 5) Command (ACH) NOTE Table 2-124 Erase (Group 5) Command (ACH) This command erases data from the specified logical block address. This command - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 172
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 173
NOTE SCSI-2 Drive Command Set Erase (Group 5) Command (ACH) When this command is executed with 14X 512 or 1024 byte/sector media, the drive will return a CHECK CONDITION status. The sense key/ additional sense code will be set to ILLEGAL REQUEST/INVALID COMMAND. 2-136 Chapter 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 174
5) Command (AEH) SCSI-2 Drive Commands Write and Verify (Group 5) Command (AEH) Writes data to the optical disk and then verifies the write 7 and Bit 6 are reserved (0). DPO A Disable Page Out bit of 1 instructs the target not to store the data in the cache after it has been transferred to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 175
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 176
is used with 512 byte/sector 14X media or 1025 byte/ sector 14X media, setting the PBA bit or the ErsCntl bit will cause the drive to return a CHECK CONDITION status. The sense key/additional sense code will be set to ILLEGAL REQUEST/Invalid Field in CDB. SCSI - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 177
SCSI-2 Drive Command Set Verify (Group 5) Command (AFH) Table 2-126 Verify (Group 5) Command (AFH) This command verifies the data starting from the specified logical block address by - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 178
to retain the data in the cache after it has been verified. A DPO bit of 0 instructs the target to retain the data in the cache after it has been verified. This bit is ignored. A Blank Verify bit of 1 indicates the drive verifies that sectors are erased. A Blk Vfy bit of 0 indicates the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 179
SCSI-2 Drive Command Set Read Defect Data (Group 5) Command (B7H) Table 2-127 Read Defect Data (Group 5) Command (B7H) This command reads optical disk defect information. The data returned starts with an 8-byte header, followed by one or more defect descriptors. Read Defect Data (Group 5) Command - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 180
Commands Table 2-128 SCSI-2 Drive Command Set Read Defect Data (Group 5) Command (B7H) Defect List Format This field specifies the Defect List Format that is returned. Only the Physical Sector Format (5) is supported. If the Block Format (0) is specified, the defect list will be returned in - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 181
to the Defect List Format that was indicated in byte 1 of the CDB, which specifies the format of the Defect List data returned by the drive. Defect List Length This field specifies the total length in bytes of the defect descriptors (see Table 2-129 on page 2-144). Physical Sector Format Defect - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 182
SCSI-2 Drive Commands SCSI-2 Drive Command Set Read Long Command (DEH) Table 2-130 Read Long Command (DEH) This command reads data starting at the specified Logical Block Address, including ECC - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 183
Count bit of 0 indicates the transfer length is represented in bytes. When this command is executed with 14X 512 or 1024 byte/sector media, the drive will return a CHECK CONDITION status. The sense key/ additional sense code will be set to ILLEGAL REQUEST/INVALID COMMAND. 2-146 Chapter 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 184
Erase, Write, or Write and Verify 650 Mbyte and 1.3-Gbyte optical disks. The 2.6 Gbyte capacity drives cannot Format, Erase, Write, or Write and Verify 650 Mbyte optical disks. If this command is issued with any of these drive/ media combinations, a CHECK CONDITION status will result with the Sense - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 185
512 media. A Sector Count bit of 0 indicates the transfer length is represented in bytes. If this command is executed for write-once disks, the drive returns a CHECK CONDITION status with the Sense Key/Additional Sense Code set to Illegal Request/Invalid Command Operation Code. 2-148 Chapter 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 186
NOTE SCSI-2 Drive Command Set Write Long Command (DFH) When this command is executed with 14X 512 or 1024 byte/sector media, the drive will return a CHECK CONDITION status. The sense key/ additional sense code will be set to ILLEGAL REQUEST/INVALID COMMAND. SCSI-2 Drive Commands Chapter 2 2-149 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 187
SCSI-2 Drive Command Set Write Long Command (DFH) 2-150 Chapter 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 188
Jukebox SCSI-2 Commands 3 Jukebox SCSI-2 Command Set Chapter 3 3-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 189
07H 0CH 12H 16H 17H 1AH 1CH Test Unit Ready Checks to determine if the optical library is ready. Rezero Unit Sets the library to a specific predefined state. Request Sense Determines a specific error condition when the library fails to successfully complete a command. Initialize Checks all - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 190
Prevent/Allow Medium Removal Prevents or allows the manual insertion or removal of media through the data to the jukebox Read Buffer Command Reads data from the jukebox Log Sense Retrieves status of the storage slots, mailslot, drives, and picker. 3-35 3-37 3-38 3-39 3-43 3-47 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 191
transport element in front of the specified destination element. Prevents or allows the manual insertion or removal of media through the mailslot. Reads data from the jukebox. Retrieves the status of the storage slots, mailslot, drives, and picker. 3-66 3-12 3-14 3-47 3-21 3-64 3-38 3-37 3-43 3-68 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 192
single SCSI initiator. Sets the library to a specific predefined state. Controls mailslot rotation. Causes the library to perform predefined diagnostic test/ exerciser routines. Checks to determine if the optical library is ready. Writes data to the jukebox 3-33 3-20 3-8 3-18 3-7 3-13 3-35 3-6 3-39 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 193
Table 3-3 Jukebox SCSI-2 Command Set Test Unit Ready Command (00H) Test Unit Ready Command (00H) This command determines the READY state of the library. If the library - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 194
SCSI-2 Commands Table 3-4 Jukebox SCSI-2 Command Set Rezero Unit Command (01H) Rezero Unit Command (01H) This command recalibrates the mechanical system and sets the library to a specific predefined state. Rezero Unit Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (01H) 1 Logical - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 195
Table 3-5 Jukebox SCSI-2 Command Set Request Sense Command (03H) Request Sense Command (03H) This command determines the specific error condition when the library fails to successfully complete a command and returns a check condition status. (Sense data is preserved for the initiator until - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 196
SCSI-2 Commands Table 3-6 Jukebox SCSI-2 Command Set Request Sense Command (03H) Request Sense Data Parameter Block Format Byte 7 6 5 4 page B-4) 14 Reserved (0) 15 SKSV Sense Key Specific (Table 3-8 on page 3-11) 16-17 Sense Key Specific 18-77 Additional Sense Bytes Valid A valid - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 197
Table 3-7 Jukebox SCSI-2 Command Set Request Sense Command (03H) Sense Key - B-2 on page B-4. SKSV When set to 1, the Sense Key Specific bytes contains valid data. When set to 0, Bytes 15, 16, and 17 are zero. Sense Key Specific When the Sense Key field is set to Illegal Request (05H) - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 198
SCSI-2 Commands Table 3-8 NOTE Jukebox SCSI-2 Command Set Request Sense Command (03H) Sense Key Field = Illegal Request (05H) and SKSV Bit = 1 Byte 7 6 15 SKSV C/D (1) 16 17 5 4 as being in error are not necessarily the bytes that need to be changed to correct the problem. Chapter 3 3-11 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 199
Table 3-9 NOTE Jukebox SCSI-2 Command Set Initialize Element Status Command (07H) Initialize Element Status Command (07H) This command checks all elements for optical disks and for relevant status. This information is retained and can be accessed through the Read Element Status Command (B8H). - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 200
SCSI-2 Commands Jukebox SCSI-2 Command Set Rotate Mailslot Command (0CH) Table 3-10 Rotate Mailslot Command (0CH) The host system may send this SCSI vendor-unique command to the optical disk library to control mailslot rotation. Rotate Mailslot Command CDB Byte 7 6 5 4 3 2 1 0 Operation - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 201
Jukebox SCSI-2 Command Set Inquiry Command (12H) Table 3-11 NOTE Inquiry Command (12H) This command requests information describing page 3-15). Allocation Length The number of bytes reserved for returned data. Vital Product data pages are not supported in "fx" model jukeboxes. 3-14 Chapter 3 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 202
(12H) Jukebox SCSI-2 Commands Table 3-12 Vital Product Data Page Codes Page Code Description 0 80H C0H Supported vital product 4 Additional Length (1FH) 5-7 Reserved (0) 8-15 Vendor Identification (HP) 16-31 Product Identification 32-35 Product Revision Level RMB Removable medium - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 203
Table 3-14 Jukebox SCSI-2 Command Set Inquiry Command (12H) AENC, TrmIOP Asynchronous event notification and the terminate I/O process message are not supported. Response Data Format Indicates the inquiry data format complies with X3131- 199X. Vendor Identification All unused bytes are - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 204
SCSI-2 Commands Table 3-15 Table 3-16 Jukebox SCSI-2 Command Set Inquiry Command (12H) Unit Serial Number Page Byte 7 6 5 4 3 2 1 0 0 1 2 3 4-15 Peripheral Qualifier (0) Peripheral Device Type (08H) Page Code (80H) Reserved (0) Page Length (0CH) - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 205
Jukebox SCSI-2 Command Set Reserve Command (16H) Table 3-17 Reserve Command (16H) This command reserves the library for use by a single SCSI initiator when the library - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 206
SCSI-2 Commands Table 3-18 Jukebox SCSI-2 Command Set Reserve Command (16H) Reserve Command Element List Descriptors Each element list consists of zero or more descriptors. The element list descriptor defines a - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 207
Jukebox SCSI-2 Command Set Release Command (17H) Table 3-19 Release Command (17H) This command releases the library or element for use by another initiator. Reserve Command - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 208
SCSI-2 Commands Jukebox SCSI-2 Command Set Mode Sense Command (1AH) Table 3-20 transport element (picker) address and number of medium transport elements. • First optical drive element address and number of drives. • Characteristics of the various element types. Mode Sense Command CDB Byte 7 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 209
Table 3-21 Jukebox SCSI-2 Command Set Mode Sense Command (1AH) Page Code Valid Page Code values are: 1DH - Element Address Assignment Page (Table 3-22 on page 3-23) 1EH - - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 210
SCSI-2 Command Set Mode Sense Command (1AH) Jukebox SCSI-2 Commands Table 3-22 Mode Sense Element Address Assignment Page (1DH) Format Byte 7 6 5 4 3 2 1 0 0 1-3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 211
run in either single-or double-picker mode. All other jukebox models run in singlepicker mode only. Number of Data Transfer 76 330fx 31 128 600fx 31 238 80ex 11 16 160ex 31 32 320ex 31 64 400ex 31 76 660ex 31 128 1200ex 31 238 10 1 or 2 20 2 20 4 20 2 20 4 or 6 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 212
, 80ex, 125ex and 220mx will run in either single- or double-picker mode. All other jukebox models run in singlepicker mode only. In single picker mode 7 bytes will be returned; in bit indicates that the medium transport element (picker) supports flipping doublesided optical disks. Chapter 3 3-25 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 213
Jukebox SCSI-2 Command Set Mode Sense Command (1AH) Device Capabilities The Device Capability Page provides information about library element • MT - Medium transport element (picker) • ST - Storage element • IE - Import/Export element (mailslot) • DT - Data Transport element (drive) 3-26 Chapter 3 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 214
SCSI-2 Command Set Mode Sense Command (1AH) Jukebox SCSI-2 Commands Table 3-26 Mode Sense Device Capabilities Page (1FH)a Byte 7 6 5 4 3 2 1 0 0 (1) (1) (0) 20-23 Reserved (0) a. This table applies to all jukeboxes, EXCEPT the 40fx, 80ex, 125ex and 220mx models. Chapter 3 3-27 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 215
Jukebox SCSI-2 Command Set Mode Sense Command (1AH) Table 3-27 Mode Sense Device Capabilities Page (1FH)a Byte 7 6 5 4 3 2 1 0 0 Sense Data Length (23) 1-3 Reserved (0) 4 Reserved (0) Page Code (1FH) 5 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 216
SCSI-2 Commands Jukebox SCSI-2 Command Set Mode Sense Command (1AH) In the descriptions of some other type. XX->YY - Move Medium A returned bit value of 1 indicates that the library supports Move Medium commands from the XX (source) element to the YY (destination) element. See Table 3-68 on - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 217
Jukebox SCSI-2 Command Set Mode Sense Command (1AH) Table 3-28 Autochanger Configuration Mode Page (20H) Byte 7 6 5 4 3 2 1 0 0 Sense Data Length (11) 1-3 Reserved (0) 4 Reserved (0) Page Code (20H) 5 Page - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 218
CONFIG 42 ON/OFF (1 = ON) Secure Large Jukebox: SECURE ON/OFF (1 = ON) Medium Jukebox: SECURE ON/OFF (1 = ON) Small Jukebox: CONFIG 15 ON/OFF (1 = ON) Secure Mail In/Out Large Jukebox: Reserved (0) Medium Jukebox: SECURE MAIL IN/OUT (1 = IN) Small Jukebox: CONFIG 31 ON/OFF (1 = ON) Power Secure - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 219
ON/OFF (1 = ON) Medium Jukebox: Reserved (0) Small Jukebox: Reserved (0) Mail In/Out Large Jukeboxes DOOR OPEN/CLOSED 1=CLOSED Medium Jukebox: Reserved (0) Small Jukebox: Reserved (0) Mail Rotation Large Jukebox: Reserved (0) Medium Jukebox: Reserved (0) Small Jukebox: CONFIG 32 ON/OFF (1 = ON - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 220
-2 Commands Jukebox SCSI-2 . The following tables provide information that can help with troubleshooting failed components in a unit. The FRUs returned should . Simply changing the FRU listed may or may not fix the associated problem. Receive Diagnostic Results Command CDB Byte 7 6 5 4 3 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 221
on page C-4). Test Number The diagnostic test number. This will not be a sequence number, but the specific test that failed. Refer to Table B-12 on page B-40 for a list of the jukebox diagnostic tests. Parameters Additional parameters as defined for individual tests. There may be several like - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 222
SCSI-2 Commands Jukebox SCSI-2 Command Set Send Diagnostic Command (1DH) Table 3-31 Send Diagnostic Command (1DH) This command causes the library to perform certain predefined diagnostic test/exercise - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 223
Number Break Loop Count Identifier Parameters Diagnostic test number. See Table B-12 on page B-40 or Table B-13 on page B-44 for a list of the jukebox diagnostic tests. Indicates how to terminate the loop count if an error occurs. 0 - Break on first error 1 - Do not break on error The number of - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 224
Jukebox SCSI-2 Commands Jukebox SCSI-2 Command Set Prevent/Allow Medium Removal Command (1EH) Table 3-33 Prevent/Allow Medium Removal Command (1EH) This command either prevents or allows users to insert or remove optical disks using the mailslot. Prevent/Allow Medium Removal Command CDB Byte 7 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 225
address of zero is the best address for use. (Changing from the default could result in a decrease in jukebox performance.) However, this field can also be set to a specific transport element address (see Table 3- 22 on page 3-23). Destination Element Address See Table 3-22 on page 3-23 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 226
) CAUTION Table 3-35 Write Buffer Command (3BH) This command writes data to the jukebox. Incorrect use of this command may cause an overwrite of critical information needed for the jukebox to operate. If this occurs, call service. Only Buffer IDs listed in Table 3-37 on page 3-40 are intended for - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 227
Table 3-37 NOTE Jukebox SCSI-2 Command Set Write Buffer Mode Descriptions Mode Description 1 Vendor specific 4 Download microcode 5 Download microcode User Accessible Microcode (FLASH EPROM) Customer and Product ID (NVRAM) Online Drive Repair ID Buffer ID 1 15 128 Allowed Write Modes 4,5 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 228
3-38 Jukebox SCSI-2 Command Set Write Buffer Command (3BH) Write Buffer Data Format When Buffer ID Set to Online Drive Repair Byte Description 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a.Model dependent Drive 1 Control Drive 2 Control Drive 3a Control Drive 4a Control Drive 5a Control Drive 6a - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 229
Table 3-39 Jukebox SCSI-2 Command Set Write Buffer Command (3BH) Drive Control Definition Byte Description 00 No change to the drive state. 01 Set drive to "Online_good" state. 04 Set drive to "Offline_failed" state. 06 Set drive to "Offline_good" state. 3-42 Chapter 3 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 230
SCSI-2 Commands NOTE Table 3-40 Read Buffer Command (3CH) This command reads data from the jukebox. Only the Buffer IDs listed in Table 3-42 on page 3-44 are intended for use outside of the factory. Read Buffer Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 231
NOTE Table 3-41 Table 3-42 Jukebox SCSI-2 Command Set Read Buffer Command (3CH) Additional Buffer IDs are for factory use only and are subject to change without notice. Read Buffer Mode Descriptions Mode 1 Vendor specific Description User Accessible Buffers and Allowed Read Modes User- - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 232
3-43 Jukebox SCSI-2 Command Set Read Buffer Command (3CH) Read Buffer Data Format When Buffer ID Set to Online Drive Repair Byte Description 0 Drive 1 Status 1 Drive 2 Status 2 Drive 3a Status 3 Drive 4a Status 4 Drive 5a Status 5 Drive 6a Status 6 Drive 7a Status 7 Drive 8a - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 233
Table 3-44 Jukebox SCSI-2 Command Set Read Buffer Command (3CH) Drive Status Definition Byte Status Description 00 Drive is not valid 01 Online_good The drive is online and in a good state. This is the normal state. All accesses allowed. 02 Online_pending The drive is offline and ready to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 234
Sense Command (4DH) Table 3-45 Log Sense Command (4DH) This command retrieves statistical library information maintained by the jukebox. Log Sense Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (4DH) 1 Logical Unit Number (0) Reserved (0) 2 Reserved (0) Page Code (Table 3-46 on - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 235
and 220mx. c. If "NS" appears in this field, the log is not supported for all models, EXCEPT 40fx, 80ex, 125ex and 220mx. d. The length of the drive log depends on the number of drives in the unit. Ten bytes per drive are available. All log pages are preceded by a 4-byte header that contains the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 236
the Log Sense Command (4DH), Table 3-45 on page 3-47 with page code 30H. It records hard errors that occur during normal operation of the jukebox. This log may be initialized before exerciser or wellness sequences are run. This allows you to accumulate data related to the test at hand. When - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 237
Jukebox SCSI-2 Command Set Log Sense Command (4DH) Table 3-48 Error/ Recovery/Runtime Log Data Entry Format Byte 7 6 5 4 3 2 1 0 0 Reserved (0) 1 Hardware Error Code (Table B-7 on page B-19) 2 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 238
-2 Commands Table 3-49 Table 3-50 Jukebox SCSI-2 Command Set Log Sense Command (4DH) Error Logs Table Format (For 40fx, 80ex, 125ex and 220mx models ONLY) Byte Description 0 Page Code 30H 1 Reserved = 0 2-3 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 239
NOTE Jukebox SCSI-2 Command Set Log Sense Command (4DH) Diagnostic User Number 0 - Poweron 1 - Front Panel 2 - SCSI Bus 3 - FRU Isolation 4 - Error Recovery 5 - SCSI Reset the most likely cause of the error, but these FRUs might not be the actual cause of the problem. 3-52 Chapter 3 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 240
Log Table Format This log is ONLY supported on the 40fx and 80ex models. This table can be accessed via the Log Sense Command (4DH), Table 3-45 on page 3-47 with page code 31H. The Move Success Log is intended for use during normal jukebox operation, not diagnostic operation. Move totals and - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 241
NOTE Table 3-53 Jukebox SCSI-2 Command Set Log Sense Command (4DH) Force Log Data Format This log is ONLY supported on 40fx and 80ex models. This table can be accessed via the Log Sense Command (4DH), Table 345 on page 3-47) with page code 32H. - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 242
page 3-47, with page code 33H. It records soft errors and related information on error recovery method and success. It is reset to 0 before any jukebox move. Any error that occurs during a move or during the subsequent error recovery is logged. The information is only valid for the most recent move - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 243
Table 3-56 Table 3-57 Jukebox SCSI-2 Command Set Log Sense Command (4DH) Recovery Log Entry Format (For the 40fx, 80ex, 125ex and 220mx models ONLY) Byte 0 1 2 3 4-7 8-11 12-15 16- - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 244
It records the number of times a drive is used by the jukebox. Drive Log Data Format Byte 0 1 Drive #4 (Model dependent, see Table 3-24 on page 3-24) Drive Log Entry Format Byte 0-3 4-5 6 7 8 9 Description Count of optical disk insertions for this drive Media source for last move to this drive - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 245
Table 3-60 Jukebox SCSI-2 Command Set Log Sense Command (4DH) Odometer Log Data Format This table can be accessed via the Log Sense Command (4DH), Table 3-45 on - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 246
Table 3-61 Table 3-62 Jukebox SCSI-2 Command Set Log Sense Command (4DH) Run-Time Log Data Format This table can be accessed via the Log Sense Command ( since this log was reset Number of fatal errors since this log was reset Number of entries in this log Chapter 3 3-59 Jukebox SCSI-2 Commands - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 247
Table 3-62 Table 3-63 Jukebox SCSI-2 Command Set Log Sense Command (4DH) Run-Time Logs Data Format (For the 40fx, 80ex, 125ex and 220mx models ONLY) Byte Description 15 Number - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 248
Retry Log Data Format This log is ONLY supported on the 40fx, 80ex, 125ex and 220mx models. This table can be accessed via the Log Sense Command (4DH), Table 3-45 on page 3-47, with page code 39H. Each retry algorithm code byte triggers a specific retry algorithm on the preceding move command. The - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 249
Eject Drive 1 Insert Drive 2 Insert Drive 3 Insert Drive 4 Insert Type Major Major Major Inline Inline Inline Inline Inline Inline Inline Inline Inline The number of drives within a unit is model dependent. Refer to Table 3-24 on page 3-24 for the actual number of drives within a specific jukebox - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 250
SCSI-2 Commands NOTE Table 3-66 Table 3-67 Jukebox SCSI-2 Command Set Log Sense Command (4DH) Move History Log Data Format This log is ONLY supported on the 40fx, 80ex, 125ex and 220mx models. This table can bee accessed via the Log Sense Command (4DH), Table 345 on page 3-47 with - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 251
Jukebox SCSI-2 Command Set Move Medium Command (A5H) NOTE Table 3-68 Move Medium Command (A5H) This command moves optical disks between library elements could result in a decrease in jukebox performance.) However, this field can also be set to a specific transport element address (see Table 3- - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 252
Invert Jukebox SCSI-2 Command Set Move Medium Command (A5H) An Invert bit value of 1 requests the transport element be inverted (flipped) before putting the optical disk into the destination element. Jukebox SCSI-2 Commands Chapter 3 3-65 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 253
Jukebox SCSI-2 Command Set Exchange Medium Command (A6H) Table 3-69 Exchange Medium Command (A6H) The optical disk in the source element is moved to the first destination element and the optical decrease in jukebox performance.) However, this field can also be set to a specific transport element - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 254
Jukebox SCSI-2 Command Set Exchange Medium Command (A6H) Source/Destination Element Address See Table 3-22 on page 3-23 in description of Mode Sense Command for more information about addressing. Inv2 An Inv2 bit value of 1 specifies that the optical disk will be inverted (flipped) prior to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 255
Jukebox SCSI-2 Command Set Read Element Status Command (B8H) Table 3-70 Read Element Status Command (B8H) This command provides the exact status of the various elements (individual storage slots, mailslot, optical drives, and picker mechanism) within the library. Read Element Status Command CDB - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 256
SCSI-2 Commands Table 3-71 Jukebox SCSI-2 Command Set Read Element Status Command (B8H) Starting Element Address Specifies the minimum element address to report. Number Of Elements Maximum number of elements - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 257
Jukebox SCSI-2 Command Set Read Element Status Command (B8H) Table 3-72 Element Type Code 1H - Picker Medium Transport Element Descriptor Block Byte 0 1 2 3 4 5 6 7 8 9 10 11 7 6 5 4 3 2 1 0 Element Type - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 258
Jukebox SCSI-2 Commands Jukebox SCSI-2 Command Set Read Element Status Command (B8H) Table 3-73 Element Type Code 2H - Storage Slot Read Element Status Storage Element Descriptor Block Byte 7 6 5 4 3 2 1 0 0 Element - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 259
Jukebox SCSI-2 Command Set Read Element Status Command (B8H) Table 3-74 Element Type Code 3H - Mailslot Read Element Status Import/Export Element element being reported by this descriptor block. InEnab When set to 1, Import to the jukebox is enabled. ExEnab When set to 1, Export from the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 260
Access Except Imp/Exp Full Jukebox SCSI-2 Command Set Read Element Status Command (B8H) When set to 1, access to set to 1, the operator inserted the cartridge into the mailslot. When set to 0, the jukebox mechanism puts the cartridge in the mailslot. When set to 1, the element contains a cartridge - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 261
Jukebox SCSI-2 Command Set Read Element Status Command (B8H) Element Type Code 4H - Drive Table 3-75 Read Element Status Data Transfer Element Descriptor Block Byte 7 6 5 4 3 2 1 0 0 Element Type Code (4H) 1 Reserved (0) 2 Element Descriptor Length (MSByte) 3 Element Descriptor - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 262
SCSI-2 Commands Jukebox SCSI-2 Command Set Read Element Status Command (B8H) Table 3-75 Read Element Status Data Transfer Element Descriptor Block Byte 7 6 5 4 3 2 1 0 20-23a Reserved (0) 24-33a Drive Serial Number (ASCII) a. These fields are applicable for the 300mx, 600mx, 700mx - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 263
unit number field contains valid information. If valid, provides the logical unit number within the SCSI bus address of the device served by the jukebox at this element. When set to 1, the source storage element address field and the invert bit information are valid. When set to 1, the cartridge - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 264
Drive Error Codes A Drive Error Codes Appendix A A-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 265
Drive Error Codes Chapter Overview Chapter Overview This chapter contains the following information: • Request Sense Command sense key values • Request Sense Command additional sense code values • Internal Error Codes • DSP Error Codes A-2 Appendix A - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 266
2-6 on page 2-10) returns values for the Sense Key and Additional Sense Code. Drive Request Sense - Sense Key Values Request Sense - Sense Key Values Byte 2, Bits an unrecovered error condition that was caused by a optical disk defect. The drive/controller detected a hardware error. There was an - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 267
to the write-protect condition of the optical disk writeprotect switch. A blank sector was detected during a Read (Group 0 or 1) or Verify, or a written sector was detected during a Write (Group 0 or 1) or a Write and Verify command. Indicates that the drive aborted the last command. The initiator - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 268
3H - ME 3H - ME 3H - ME 4H - HE 3H - ME 1H - RE 1H - RE 1H - RE No Additional Sense Information Write Fault, Write Command Failed Drive Not Ready LUN in Process of Becoming Ready LUN Not Ready, Initializing Command Required LUN Not Ready, Format in Progress Tracking Servo Failure Focus Servo - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 269
Table A-2 Drive Error Codes Drive Request Sense Command Values Request Sense - Additional Sense Code Logical Block Address out of Range Invalid Field In CDB LUN Not Supported Invalid Parameter List Parameter Not Supported Parameter Value Invalid Write Protected Medium Changed Power-On, Reset or - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 270
Table A-2 Drive Error Codes Drive Request Sense Command Values Request Sense 4H - HE 4H - HE 4H - HE 4H - HE 4H - HE BH - AC Saving Parameters Not Supported Medium Not Present Invalid Bits in Identify Message Microcode Has Been Changed Bias Magnet Failure Limited Laser Life Temperature Alarm Laser - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 271
Table A-2 Drive Error Codes Drive Request Sense Command Values Request Sense - Additional Sense Code Values Sense Code and Qualifier Sense Key Description 44 00 45 00 47 00 48 00 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 272
Power on, reset, or bus device reset occurred (5.2 Gb drives) Unit Attention: power on reset (9.1 Gb drives) SCSI bus reset (9.1 Gb drives) SCSI bus device reset message (9.1 Gb drives) Autochanger reset (9.1 Gb drives) 00090000 Mode parameter changed 006B0000 Microcode changed 02540000 Queued - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 273
Drive Error Codes Internal Error Codes Table A-3 Internal Error Codes Error Code ( was specified 0210XXXX Parameter list length is wrong 0211XXXX The parameter saving function is not supported 0212XXXX The parameter is not currently saved 0213XXXX Cartridge eject was prevented 0250XXXX Attempt to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 274
unable to go Ready because of an unknown reason 0425XXXX The drive is in process of becoming ready 046FXXXX The drive is in process of formatting a disk 0514XXXX The Defect List Format is not supported 0515XXXX The cartridge is write-protected 0528XXXX Invalid cartridge ID hole 0529XXXX The medium - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 275
Drive Error Codes Internal Error Codes Table A-3 Internal Error Codes Error Code (hex.) Message 0543XXXX DMA sector cannot be read 0544XXXX DDS data are invalid 0545XXXX - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 276
Error Codes Drive Error Codes Internal Error Codes Table A-3 Internal Error Codes Error Code (hex.) Message 0582XXXX ID Error reoccurs after retry even after changing ID Error criteria - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 277
Drive Error Codes Internal Error Codes Table A-3 Internal Error Codes Error Code (hex.) Message 078DXXXX VFO Offset Calibration failed 078EXXXX ID VGA Calibration failed 078FXXXX MO - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 278
was transferred 24 Uncorrectable error 25 CRC error (uncorrectable) 29 Cannot follow the read data transfer from the drive 31 Cannot follow the write data transfer from the drive 32 Digital Sum Value (DSV) error 34 Written sector is detected 42 Buffer Memory Write/Read/Compare error - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 279
Table A-4 Drive Error Codes Internal Error Codes ODC Error Codes Code (hex.) Description 44 Cannot proceed with error correction because the syndrome buffer was filled 45 Cannot - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 280
was transferred 24 Uncorrectable error 25 CRC error (uncorrectable) 29 Cannot follow the read data transfer from the drive 31 Cannot follow the write data transfer from the drive 32 Digital Sum Value (DSV) error 34 Written sector is detected 42 Written sector is detected Appendix - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 281
Table A-5 Drive Error Codes Internal Error Codes ODC Error Codes Code (hex.) Description 44 Cannot proceed with error correction because the syndrome buffer was filled 45 Cannot - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 282
8X) 10 Cannot be arranged (Read channel IDVGA calibration) (4X/8X) 11 Medium mischuking (FCSFLR) 21 Spindle off aborted 34 Calibration request 41 Drive is not ready 43 Imitation ATT signal caused by ESD 44 Focus failed (ID search) 45 LPC Attention occurred 52 Illegal zone selected - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 283
search) 5B Kick inner area failed 5C Servo agc time out 61 Focus on failed 62 Focus on aborted 63 Tracking on failed 64 Tracking drive saturation 65 No ID (No SM or CRC=NG) (DON start) 66 No ID (No SM or CRC=NG) (SEEK start) 67 No ID (No - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 284
Table A-6 Drive Error Codes DSP Error Codes DSP Error Codes Code (hex.) Description 72 Focus failed (PEP positioning) 74 Focus alarm D1 Illegal address selected D3 Invalid command D4 Communication failure E1 Spindle Lock time out (drive on) Appendix A A-21 Drive Error Codes - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 285
Table A-6 Table A-7 Drive Error Codes DSP Error Codes DSP Error Codes Code (hex.) E2 Signal Command Descriptor Block Cyclic Redundancy Check Disk Definition Standard Defect Management Area Drive On Digital Signal Processor Digital Sum Value "D" Trigger Signal Initiator Target and Logical Unit A-22 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 286
RESYNC SDL SM SFP SYNC VCM VGA VFO Initiator Target and Logical Unit and Queue Tag Logical Block Address No Good Optical Drive Controller Postamble Phase-Encoded Part Primary Defect List Resynchronization pattern Secondary Defect List Sector Mark Standard Format Part Synchronization pattern Voice - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 287
Drive Error Codes DSP Error Codes A-24 Appendix A - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 288
Autochanger Error Codes B Autochanger Error Codes Appendix B B-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 289
Sense Command (4DH), Request Sense Command (03H), or through the control panel. See Appendix C for a list of field replaceable units for the each of the jukebox models. B-2 Appendix B - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 290
by the autochanger/controller. The autochanger cannot be accessed. The command terminated with an unrecovered error condition that was caused by a optical disk defect. The autochanger/controller detected a hardware error. There was an illegal parameter in the command descriptor block or in the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 291
on page B-14) Aborted command (boot code) Autochanger becoming ready Unit must first initiate element status Fatal error - unit must be corrected manually Firmware download needed (boot code) Download checksum error Move error (Check additional sense bytes) (Table B-6 on page B-14) Invalid parameter - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 292
-IR 5H-IR 5H-IR 06-UA 4H-HE 4H-HE OB-AC 4H-HE 0B-AC 0B-AC 0B-AC 0B-AC Unsupported command Drive is not online Illegal field in CDB Invalid LUN Invalid parameter list Power on sense or bus reset Online repair parameters Command cleared by initiator - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 293
5H-IR 5H-IR 2H-NR Bus protocol error (second command sent early) Media load or eject failed Medium removal prevented Medium removal prevented on drive Transaction queue is full B-6 Appendix B - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 294
Table B-3 Table B-4 Autochanger Error Codes Request Sense Error Codes Invalid Address: Sense Code 2IH Field Pointer 00 02 04 06 08 Description Invalid element address Invalid transport element Invalid source element Invalid destination element Invalid second destination element Element Full/ - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 295
Autochanger Error Codes Additional Sense Data Format for Error Recovery Additional Sense Data Format for Error Recovery Table B-5 For all models, EXCEPT 40fx and 80ex. Below is a description of the 60 Additional Sense Bytes returned during the Data In Phase of the Request Sense Command (03H), ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 296
Autochanger Error Codes Autochanger Error Codes Additional Sense Data Format for Error Recovery Table B-5 Request Sense - Additional Sense Data (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Byte 7 6 5 4 3 2 1 0 40-41 42-43 44-45 46-47 48-49 50-53 54 55 56 57 58-77 Vertical Motor - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 297
the most likely cause of an error, but may not be the actual cause of a problem. Simply changing the FRU listed may or may not fix the associated problem. Move Command Attempted 0 - Exchange 1 - Move 2 - Seek 3 - Initialize Element 4 - Rezero 5 - Rotate Mailslot 6 - Restore 7 - Passthru - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 298
Motor Actual Position The actual position of the translate motor. Odometer The move odometer. Mechanism State Bit Map (Byte 54) The state of the jukebox after the termination of the retry or recovery algorithms. This byte is bit mapped from least significant bit to most significant bit as - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 299
Autochanger Error Codes Additional Sense Data Format for Error Recovery 3 - Cartridge in Transport 16 1=a cartridge is in the transport 16 mechanism. If the cartridge wasn't replaced after a failure, the appropriate Element Bit Map will indicate which cartridge is in the transport. 2 - Cartridge - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 300
Autochanger Error Codes Autochanger Error Codes Additional Sense Data Format for Error Recovery Destination 1 Element Bit Map (Byte 56) Indicates the status of the element that was the First Destination of the Exchange command after the failure or retry of the command. 7 - Valid 1= the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 301
Autochanger Error Codes Additional Sense Data Format for Error Recovery Table B-6 Request Sense - Additional Sense Data (For models 40fx, 80ex, 125ex and 220mx ONLY) Byte 7 6 5 4 3 2 1 0 18 Move Error (Table B-9 on page B-29) 19 Hardware Error Code (Table B-8 on page B-22) 20 First - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 302
A-2 on page A-4.) NOTE The FRU numbers returned are indicators for the most likely cause of an error, but may not be the actual cause of a problem. Simply changing the FRU listed may or may not fix the associated - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 303
bit of 1 indicates that more than one attempt was needed to insert the cartridge into the drive. (For Byte 26, this attempt refers to Retry algorithm and for Byte 30 it refers to Recovery algorithm.). A Drive Eject Retry bit of 1 indicates that more than one attempt was needed to eject the cartridge - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 304
Error Codes Additional Sense Data Format for Error Recovery BFHm A Bad Find Home bit of 1 indicates the Find Home algorithm was started while the optical sensors were inoperable. (For Byte 26, this attempt refers to Retry algorithm.) FHR A Find Home Recalibration bit of 1 Find Home algorithm was - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 305
Autochanger Error Codes Additional Sense Data Format for Error Recovery Secondary Source Element Number The Element Number to which the Secondary Source Element Bit Map (Byte 41) refers. Second Destination Element Number The Element Number to which the Second Destination Element Bit Map ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 306
manual aide service in problem. Hardware Error Codes (medium and large models only) Error Code (hex.) Failure Description 01 ROM checksum error 02 Register error 03 Microprocessor error 04 Controlled area of RAM checksum error 05 RAM test error 06 SCSI chip error 07 Jukebox - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 307
Hardware Error Codes (medium and large models only) Error Code (hex.) Failure Description 11 Drive serial communications failure 1E Translate motor error 1F Vertical motor error 10 Drive configuration error 20 Plunge motor error 28 Mailslot sensor error 2B Top thumb sensor error 2C - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 308
Restore picker 4D Find translate home 4E Find vertical home 4F Find plunge home 50 Clear flip area 51 Clear magazine path 52 Clear drive path 53 Clear mailslot path 5B Finish switch picker 5C Wait plunge 5D Wait vertical 5E Powerfail clear path 5F Powerfail restore cartridges - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 309
80ex, 125ex, and 220mx models ONLY) Error Code (hex.) Failure Description JUKEBOX CONTROLLER PCA ERROR CODES 00 No error 01 ROM checksum error 03 RAM exception encountered by microprocessor 09 Firmware error SCSI INTERFACE-SPECIFIC ERROR CODES 0B SCSI controller register error 0C SCSI - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 310
(not supported) MOTOR CONTROL IC ERROR CODES 2C Failed read\write test to Motor control IC 2D Motor control IC loopback test failed 2E Motor control IC RAM test failed POWER SUPPLY ERROR CODES 33 Low voltage power supply failed 34 High voltage power supply failed DRIVE CONNECT ERROR - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 311
Error Codes (For the 40fx, 80ex, 125ex, and 220mx models ONLY) Error Code (hex.) Failure Description 39 Drive 2 not connected 3A Drive 3 not connected 3B Drive 4 not connected MECHANISM ERROR CODES 3CH Unspecified mechanical failure 3EH Unspecified servo failure 40H Unable to free the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 312
measure height of sensor on right side 50H Excessive tilt of the Carriage/Picker assembly (away from the drives) 51H Excessive tilt of the Carriage/Picker assembly (toward the drives) 52H Excessive cone angle on Picker 53H Excessive stack tilt 54H Unable to complete an interrupted move - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 313
models ONLY) Error Code (hex.) Failure Description 60H Optical sensor failed (leadscrew side - near drives) 61H Optical sensor failed (non-leadscrew side - near drives) 62H Optical sensor failed (leadscrew side - near mailslot) 63H Optical sensor failed (non-leadscrew side - near mailslot - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 314
(hex.) Failure Description B9H Drive #2 access error BAH Drive #3 access error BBH Drive #4 access error SOLENOID ERROR CODES BCH Drive #1 access failure; possible solenoid failure BDH Drive #2 access failure; possible solenoid failure BEH Drive #3 access failure; possible solenoid - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 315
Autochanger Error Codes Hardware Error Codes Table B-8 Hardware Error Codes (For the 40fx, 80ex, 125ex, and 220mx models ONLY) Error Code (hex.) Failure Description FEH The test did not run, probably a configuration error FFH Invalid test number a. For further explanation, refer to the next - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 316
error codes ONLY apply to the model 40fx, 80ex, 125ex, and 220mx jukeboxes. Move Errors are reported through byte 18 of the Additional Sense Bytes Carriage/Picker assembly away from drives. 06 Failure while moving the Carriage/Picker assembly toward drives. 08 Failure while flipping the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 317
20 Failure while moving the Picker fingers forwards to engage the cartridge ejected from the drive (source). 22 Failure while moving the Picker fingers back to remove the cartridge from the drive (source). 28 Failure while moving the Picker fingers forwards to insert the cartridge into the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 318
inserted the proper distance. 90 Source element unexpectedly empty. 94 Destination element unexpectedly full. A0 Front mailslot sensor failed. A2 Inside mailslot sensor failed. A4 Drive light stuck on. B0 Door interlock open. Autochanger Error Codes Appendix B B-31 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 319
-Move Error Codes NOTE Table B-10 Jukebox Micro-Move Error Codes Micro-Move Errors are reported through bytes 50-55 in the additional sense bytes (Table 5-6 on page 5-14) of the Request - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 320
Table B-10 Autochanger Error Codes Jukebox Micro-Move Error Codes Micro- drive 21 No cartridge in drive 22 Drive put in accept failed 23 Drive get out accept failed 24 Drive eject failed 25 Drive insert failed 26 Drive eject retry 27 Drive insert retry 28 Clear drive path 29 Drive - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 321
Table B-10 Autochanger Error Codes Jukebox Micro-Move Error Codes Micro-Move Error Codes Error Code Failure Description (hex.) 2A Drive not connected 32 Magazine put in saturate failed 33 Magazine get out saturate failed 34 Magazine put in accept failed 35 Magazine get out accept - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 322
Table B-10 Autochanger Error Codes Jukebox Micro-Move Error Codes Micro-Move Error Codes Error Code Failure Description (hex.) 5A Command received to rotate mailslot but both pickers are full 5B - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 323
Codes Jukebox Micro-Move Error Codes Micro-Move Error Codes Error Code Failure Description (hex.) 6E Test failed Micro-Move Error Codes (For the 40fx, 80ex, 125ex, and 220mx models ONLY) Error Code (hex.) 0 1 2 3 4 5 6 7 8 9 A B C D E 10 11 Description No error Carriage motor drive voltage - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 324
Autochanger Error Codes Table B-11 Autochanger Error Codes Jukebox Micro-Move Error Codes Micro-Move Error Codes ( The translate distance was too short. 31 Failed while checking for cartridge in a drive. 32 Failed to find a hard stop returning cartridge to storage after testing for presence - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 325
Table B-11 Autochanger Error Codes Jukebox Micro-Move Error Codes Micro-Move Error Codes (For the 40fx, mailslot out. 70 Exhausted retries while attempting to get the drive to eject the cartridge. 71 Could not verify that the drive ejected the cartridge. 72 Could not free fingers from the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 326
Table B-11 Autochanger Error Codes Jukebox Micro-Move Error Codes Micro-Move Error Codes (For the 40fx, 80ex, 125ex, and 220mx models ONLY) Error Code Description (hex.) 74 No load complete. 75 Drive error signal. 76 Unexpected cartridge in the drive. 77 Unexpected load complete. 78 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 327
, the optical disk library file system is no longer accurate. Not all tests listed in Table 5-12 on page 5-39 are supported on all HP jukebox models. Diagnostic of the TEST jukebox by running the INIT MECHANICS and EXERCISE MECH tests. Requires one loaded cartridge; drive and mailslot must - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 328
" if there are no disks in the jukebox or if all storage slots are full. The drives and mailslot must be empty. 16 DRIVE IO Makes a combination of moves with a PASS/ FAIL result. It moves an optical disk from a randomly-chosen full slot to a randomlychosen drive, with a random flip. It then moves - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 329
moves an optical disk from the lowest-numbered full slot to the mailslot with a random flip. It then moves the cartridge back to its original slot with its original orientation. This test displays if there are no disks in the jukebox or if all storage slots are full. The drives and mailslot must - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 330
Table B-12 Autochanger Error Codes Jukebox Micro-Move Error Codes Diagnostic Tests (EXCEPT for models 40fx, 80ex, 125ex, and 220mx) No. Front Panel Description Test Name 29 CLEAR HARD Sets Information - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 331
Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY) No. Test Name Description 1 Poweron 2 Wellness Test Checks all digital data paths and normal machine operation. This sequence runs tests that are identical to those run when the optical - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 332
Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY) No. Test Name 3 Controller Test 5 Initialize Mechanism Exerciser Tests 10 Initialize Element Status Description This sequence is run by the Autochanger controller when the optical Drive - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 333
Autochanger Error Codes Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, if there are no cartridges loaded into the unit, or if any drive is full. Requires one loaded cartridge, drives and mailslot empty. 12 Carriage Move Test Performs a combination of carriage - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 334
Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY) No. Test Name Description 16 Drive optical drive. Returns an error code #57H Invalid Configuration if there are no cartridges loaded into the unit. Requires one loaded cartridge; drives must - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 335
Autochanger Error Codes Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY) No. Test Name Description 23 Shipping Moves the picker - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 336
Jukebox Drive Connect Test Checks for expected drive configuration. This is done by polling the drive connect signal on each of the possible drives. This line is grounded at the drive end if a drive is connected. If the drives Run. 42 Optical Sensor Test Checks the status of the optical sensors. - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 337
Autochanger Error Codes Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, Carriage/Picker Runs the portion of the mechanism recalibration Assembly Calibration related to the optical sensors. It measures sensor Test offsets and calculates picker tilt and droop. This - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 338
Autochanger Error Codes Autochanger Error Codes Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY) No. Test Name 60 FRU Isolation Test 65 Calibrate - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 339
Autochanger Error Codes Jukebox Micro-Move Error Codes B-52 Appendix B - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 340
Field Replaceable Units C Field Replaceable Units (FRUs) Appendix C C-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 341
Field Replaceable Units (FRUs) HP Field Replaceable Units (FRUs) Table C-1 HP Field Replaceable Units (FRUs) Jukebox FRUs (For all models, EXCEPT 40fx, 80ex, 125ex, and 220mx) FRU # Description 1 Controller PCA 2 MO Drive 4 Interconnect PCA 5 Lower Interconnect Board 6 Stars Wars Board - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 342
Table C-1 Field Replaceable Units (FRUs) HP Field Replaceable Units (FRUs) Jukebox FRUs (For all models, EXCEPT 40fx, 80ex, 125ex, and 220mx) FRU # Description 41 Vertical Umbilical Cable 43 Translate Umbilical Cable 51 5/12 Power Cable 54 Drive Power Cable 57 Vertical Path-Clear Sensor - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 343
Table C-2 Field Replaceable Units (FRUs) HP Field Replaceable Units (FRUs) Jukebox FRUs (For the 40fx, 80ex, 125ex and 220mx models ONLY) FRU # Description 1 Autochanger Controller PCA 4 Interconnect PCA 20 MO/MF Drive (single-ended) 21 Left Way 22 Display/Front Panel PCA 23 Carriage - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 344
Table C-2 Field Replaceable Units (FRUs) HP Field Replaceable Units (FRUs) Jukebox FRUs (For the 40fx, 80ex, 125ex and 220mx models ONLY) FRU # Description 51 MO Drive/Controller Power Cable 52 5/12V Module Power Cable 55 SCSI Cable (internal) 56 Front Panel Address Cable 57 Motor Power - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 345
Field Replaceable Units (FRUs) HP Field Replaceable Units (FRUs) C-6 Appendix C - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 346
Micro/Macro-Moves D Micro/Macro-Moves Appendix D D-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 347
HP Surestore Optical Micro-Move IDs Table D-1 HP Surestore Optical Micro-Move IDs HP Surestore Optical vertical movement as a plunge is made into a drive. Used to "wiggle" the picker during error recovery Move picker transport to the bottom of the jukebox, checking for a clear path. Used in - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 348
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) E Vertical put mail duck (not used). F Vertical saturate - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 349
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) 32 Translate idle. 33 Translate and saturate right. - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 350
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, of a two-step plunge move to put a cartridge into a drive. Cartridge is inserted to a point where the drive shutter arms start to engage. Appendix D D-5 Micro/Macro-Moves - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 351
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) 76 First time "put" plunge into a drive. Slow. Feels for resistance to learn the distance to the cartridge - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 352
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all plunge to test for a cartridge in a drive when the picker contains a cartridge. If resistance is felt, this is interpreted as a cartridge in the drive. Used in an ISTAT. 8B Plunge - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 353
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) 8E Move picker plunge assembly out to rearm - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 354
-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) A0 Plunge finish home (not used). A1 Plunge finish saturate home (not used). A2 First of two plunge movements toward the drive - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 355
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) AB Move picker plunge assembly forward a small amount - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 356
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) B3 Retract picker plunge assembly back far enough - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 357
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all the physical force check. BC Retract picker plunge assembly after detecting a cartridge in the drive. Used in an ISTAT when there is a cartridge in the picker. BD Retract picker - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 358
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) C4 Insert cartridge fully into a drive. Distance has been learned. Part two of a two-stage move. Used in the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 359
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) CE Plunge out to clear the mailslot path. - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 360
Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, for 80fx, 160fx, 200fx, 160ex, 320ex, 400ex, 300mx, 600mx, and 700mx model jukeboxes. DC Slow retract of the picker plunge assembly, pulling the mailslot in. Checks that the - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 361
HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) E6 Retract picker plunge assembly a short distance to relieve the pressure after micro-move E5. The following move IDs are only for 330fx, 600fx, 660ex model jukeboxes. E7 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 362
Table D-2 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For models 40fx, 80ex, 125ex and 220mx ONLY) Move ID Description (hex.) 0 No motion; no commands pending 1 Carriage motion; full speed (away from drives) 2 Carriage motion; full speed ( - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 363
Table D-2 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For models 40fx, slot after releasing the cartridge 18 Move fingers toward drive; prepare to grab cartridge 19 No motion; waiting for drive to eject the cartridge 1A Carriage shake; to - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 364
Table D-2 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For models 40fx, 80ex, 125ex and 220mx ONLY) Move ID Description (hex.) 24 Detect cartridge in mailslot before grab 25 Take - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 365
Table D-2 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For models 40fx, 80ex drive after insertion (away from drives) 43 Short carriage motion to check for cartridge sticking out of a drive during error recovery (towards, then away from drives) - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 366
Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For models 40fx, 80ex, 125ex and 220mx ONLY) Move ID Description (hex.) 45 Short translate after finding leadscrew side (toward non- leadscrew side) 46 Short carriage motion after finding leadscrew side (away from drives - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 367
Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID drive recovery 5F Drive recovery 60 Drive recovery 61 Short carriage motions during drive recovery (wiggle motion) 62 Long carriage motion in drive recovery (toward, then away from drives) 63 Drive - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 368
Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For models 40fx, 80ex, 125ex and 220mx ONLY) Move ID Description (hex.) 67 Pull back fingers from drive after releasing cartridge; during recovery 68 Push cartridge towards drive, using short steps - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 369
Micro/Macro-Moves HP Surestore Optical Micro-Move IDs D-24 Appendix D - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 370
Disconnect Timeouts E Disconnect Timeout Settings Appendix E E-1 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 371
Disconnect Timeout Settings Disconnect Timeout Settings NOTE Table E-1 Disconnect Timeout Settings The following commands will cause a SCSI disconnect. It is useful to know what the maximum times for disconnect are so driver timeouts can be set appropriately. In Table E-1 the maximum disconnect - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 372
Disconnect Timeout Settings Disconnect Timeout Settings a. If the Read Element Status Command disconnects, it will perform movements identical to that of the Initialize Element Status before sending the element status data. Therefore, the timeout should be set the same as the Initialize Element - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 373
Disconnect Timeout Settings Disconnect Timeout Settings E-4 Appendix E - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 374
definitions, 51 locations, 51 disconnect, 10 disconnect 04H, 9 disconnect timeout settings, 2 disconnect-reconnect page 02H, 36, 59 drive control commands, 3 drive log data format, 57 drive request sense command values, 3 sense key values, 3 DSP error codes, 19 E element full/empty, sense code 3BH - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 375
40 message in phase, 4 message out phase, 4 message phase, 4 Message Priority Error 09H, 11 message reject, 10 message reject 07H, 10 messages target-supported, 5 micro-move error codes, 32 micro-move ID table, 2 mode page 20H parameter default values, 49 mode page parameter default values, 48 mode - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 376
), 73 Status Phase, 14 synchronize cache (35H), 95 synchronous negotiation, 7 T target device, 2 target SCSI commands, 18 target-supported messages, 5 Target-Supported Status Codes, 14 test unit ready (00H), 8 test unit ready command (00H), 6 transfer period values, 8 typographical conventions, iii - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 377
Index 4 - HP 2600fx | Optical Drive and Library SCSI-2 Command Reference - Page 378
Copyright © 2001 Hewlett-Packard Company Printed in U.S.A. Edition 12/2001 www.hp.com/go/support Printed on recycled paper
optical
drive and library
SCSI-2 command
reference
for models
fx, ex and mx