HP 2710p Memory Modules - Windows Vista
HP 2710p - Compaq Business Notebook Manual
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 2710p manual content summary:
- HP 2710p | Memory Modules - Windows Vista - Page 1
Memory Modules User Guide - HP 2710p | Memory Modules - Windows Vista - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: May 2007 Document Part Number: 440544-001 - HP 2710p | Memory Modules - Windows Vista - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - HP 2710p | Memory Modules - Windows Vista - Page 4
iv Product notice ENWW - HP 2710p | Memory Modules - Windows Vista - Page 5
Table of contents Adding or replacing a memory module Index ...5 ENWW v - HP 2710p | Memory Modules - Windows Vista - Page 6
vi ENWW - HP 2710p | Memory Modules - Windows Vista - Page 7
the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the 2 memory module compartment cover screws - HP 2710p | Memory Modules - Windows Vista - Page 8
the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 2 Adding or replacing a memory module ENWW - HP 2710p | Memory Modules - Windows Vista - Page 9
and right edges of the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close the cover (2). 13. Tighten the 2 memory module compartment cover screws (3). 14. Replace the battery. ENWW 3 - HP 2710p | Memory Modules - Windows Vista - Page 10
15. Reconnect external power and external devices. 16. Turn on the computer. 4 Adding or replacing a memory module ENWW - HP 2710p | Memory Modules - Windows Vista - Page 11
Index M memory module adding 1 inserting 3 removing 2 replacing 1 upgrading 1 memory module compartment cover removing 2 replacing 3 ENWW Index 5 - HP 2710p | Memory Modules - Windows Vista - Page 12
Memory Modules
User Guide