HP 2730p Memory Modules - Windows XP
HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Manual
 |
UPC - 884420401063
View all HP 2730p manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 2730p manual content summary:
- HP 2730p | Memory Modules - Windows XP - Page 1
Memory Modules User Guide - HP 2730p | Memory Modules - Windows XP - Page 2
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be - HP 2730p | Memory Modules - Windows XP - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. iii - HP 2730p | Memory Modules - Windows XP - Page 4
iv Product notice - HP 2730p | Memory Modules - Windows XP - Page 5
Table of contents 1 Adding or replacing a memory module 2 Increasing hard drive space for the Hibernation file Index ...6 v - HP 2730p | Memory Modules - Windows XP - Page 6
vi - HP 2730p | Memory Modules - Windows XP - Page 7
, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic be sure both memory modules are the same size. To add or replace a memory module: 1. Save your work. 2. Shut down the system. 3. Disconnect all external devices connected to the computer. 4. Unplug the - HP 2730p | Memory Modules - Windows XP - Page 8
the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the 6 memory module compartment screws (1). 8. Lift the memory module compartment cover (2) away from the computer. 9. If you are replacing a memory module, remove the existing memory module: a. Pull away - HP 2730p | Memory Modules - Windows XP - Page 9
10. Insert a new memory module: NOTE: If you are inserting a memory module and both memory module slots are vacant, be sure that you insert the memory module into the primary memory module slot. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To - HP 2730p | Memory Modules - Windows XP - Page 10
13. Tighten the 6 memory module compartment screws (3). 14. Replace the battery. 15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer. 4 Chapter 1 Adding or replacing a memory module - HP 2730p | Memory Modules - Windows XP - Page 11
computer. The operating system reserves space on the hard drive to store the Hibernation file based on the amount of system memory. When you increase the memory, the operating system increases the hard drive space reserved for the Hibernation file. If you experience problems with Hibernation after - HP 2730p | Memory Modules - Windows XP - Page 12
H hard disk drive space 5 hard drive space 5 Hibernation 5 Hibernation file 5 M memory adding memory modules 1 increasing 5 replacing memory modules 1 upgrading memory modules 1 memory module adding 1 inserting 3 removing 2 replacing 1 upgrading 1 memory module compartment cover removing 2 replacing - HP 2730p | Memory Modules - Windows XP - Page 13
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
Memory Modules
User Guide