HP 2840 HP Color LaserJet 2820/2830/2840 All-In-One - User Guide - Page 233
Control panel messages, Alert and warning messages, Description, Recommended action, 000x Supply error
UPC - 829160742731
View all HP 2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Control panel messages The majority of the control-panel messages are intended to guide the user through typical operation. The control-panel messages indicate the status of the current operation, and include a page count on the second line of the display, if appropriate. When the device is receiving fax data, print data, or scanning commands, control-panel messages indicate this status. In addition, alert messages, warning messages, and critical error messages indicate situations that might require some action. Alert and warning messages Alert and warning messages appear temporarily and might require the user to acknowledge the message by pressing ENTER to resume or by pressing CANCEL to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the device will attempt to resume the printing job after the warning has appeared for 10 seconds without acknowledgement. Alert and warning messages Control panel message 10.000x Supply error ADF door is open Canceled copy. Clear document Canceled scan. Clear document Description Recommended action E-label can't be read or print cartridge is not properly installed. 1. Reinstall print cartridge. 2. Power cycle device. 3. If the problem is not solved, replace the cartridge. The ADF lid is open or a sensor is malfunctioning. Make sure that the ADF lid is closed. Remove the ADF and reinstall it. If the message persists, turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. Try another power source. If the error persists, contact HP Customer Care. See Service and support or the support flyer that came in the device box. The CANCEL button was pressed to cancel the current job while pages were feeding from the ADF. The cancel process does not automatically clear the ADF. Remove the jammed item. See Media jams occur in the automatic document feeder (ADF). Then, clear the items in the ADF tray and start over. The CANCEL button was pressed to cancel the current job while pages were feeding from the ADF. The cancel process does not automatically clear the ADF. Remove the jammed item. See Media jams occur in the automatic document feeder (ADF). Then, clear the items in the ADF tray and start over. ENWW Control panel messages 217