HP 2840 HP Color LaserJet 2820/2830/2840 All-In-One - User Guide - Page 236
Control panel message, Description, Recommended action, Fax memory full Canceling send
UPC - 829160742731
View all HP 2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Alert and warning messages (continued) Control panel message Description Fax memory full Canceling send During the fax job, the memory filled. All pages of the fax have to be in memory for a fax job to work correctly. Only the pages that fit into memory were sent. Fax recv. error An error occurred while trying to receive a fax. Recommended action Print all received faxes or wait until all pending faxes are sent. Ask the sender to send the fax again. Cancel all fax jobs or clear the faxes from memory. See Deleting faxes from memory. Ask the sender to resend the fax. Try faxing back to the sender or another fax machine. Check for a dial tone on the phone line by pressing START FAX. Check that the telephone cord is securely connected by unplugging and replugging the cord. Make sure that you are using the telephone cord that came with the device. Make sure that the phone is working by disconnecting the device, plugging in a telephone to the phone line, and making a voice call. Turn off error-correction mode (ECM), and turn off V.34. Ask the sender to resend the fax. See Setting the fax-errorcorrection mode or Changing the V.34 setting. Connect the device to a different phone line. If the error persists, contact HP Customer Care. See Service and support or the support flyer that came in the device box. 220 Chapter 14 Troubleshooting ENWW