HP 336045-B21 HP IP and Server Console Switches G2 User Guide
HP 336045-B21 - Server Console Switch KVM Manual
UPC - 808736948746
View all HP 336045-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 336045-B21 manual content summary:
- HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 1
HP IP and Server Console Switches G2 User Guide Part Number 585313-001 September 2009 (First Edition) - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 2
warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP under license. Intended audience This document is for the person who installs racks - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 3
of features ...7 KVM switching capabilities...7 True serial capabilities ...8 Local and remote user interfaces ...8 Virtual media capabilities ...8 Smart card capabilities ...8 Component identification ...9 HP Server G2 Console Switch components 9 HP IP G2 Console Switch components...10 Interface - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 4
interfaces ...32 Target devices ...32 Appliance tools...33 Upgrading the console switch firmware 34 Saving the console switch configuration or user database 35 Restoring the console switch configuration or user database 35 Viewing system information ...36 System alerts...36 Network settings ...37 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 5
for Linux operating systems 72 Troubleshooting ...74 Console switch troubleshooting ...74 Connection length table ...75 Frequently asked questions ...76 Console switch frequently asked questions 76 Technical support...77 Before you contact HP...77 HP contact information ...77 Regulatory compliance - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 6
Index...85 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 7
the HP Server Console Switch. The following features are available for the new generation console switches: • Local and remote KVM console access • True serial capability • Dual power supplies for redundancy • Virtual media capability • Smart card (CAC) capability • Enhanced video resolution support - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 8
capable interface adapter. You can connect smart card readers directly to the console switch using local USB ports, or you can connect smart card readers to any remote workstation. The smart card reader must be connected prior to starting a console session with the server. For more information about - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 9
identification HP Server G2 Console Switch components Item 1 2 3 4 5 6 7 8 9 10 11 Description Power supply status indicator LEDs LAN connector Tiering chain port RJ-45 serial setup port Console A VGA connector Console A USB ports Console B VGA connector Console B USB ports Interface adapter ports - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 10
HP IP G2 Console Switch components 1x1Ex8 Item 1 2 3 4 5 6 7 8 9 10 11 Description Power supply status indicator LEDs LAN 1 LAN 2 S1, S2, and S3 (reserved for future use) Tiering chain port RJ-45 serial setup port Local console VGA Local console USB ports Interface adapter ports (1-4) Interface - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 11
Item 5 6 7 8 9 10 Description RJ-45 serial setup port Local console VGA Local console USB ports Interface adapter ports (1-16) Interface adapter ports (17-32) Power connectors A & B Interface adapters Interface adapters that support Virtual Media have two LEDs on the front of the RJ-45 connector. - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 12
USB 2.0 interface adapter with Virtual Media Item 1 2 3 Description Video connector RJ-45 connector USB connector PS2 interface adapter with Virtual Media Item 1 2 3 4 5 Description Video connector RJ-45 connector USB connector (for Virtual Media only) Mouse connector Keyboard connector - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 13
Item 1 2 3 Description RJ-45 serial connector (to RJ-45/DB9 adapter or to a Cisco appliance) Power connector (mate to USB power connector or power supply) RJ-45 connector (for CAT5 to switch) USB interface adapter with Virtual Media and CAC Item 1 2 3 Description Video connector RJ-45 connector - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 14
PS2 interface adapter with Virtual Media and CAC Item 1 2 3 4 5 Description Video connector Mouse connector Keyboard connector USB connector (for Virtual Media only) RJ-45 connector To determine which interface adapter you should use, see Selecting an interface adapter (on page 23). Component - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 15
to supply connections other than direct connections to the branch circuit, such as the use of power strips. Installation checklist Before installation, refer to the following lists to be sure that all of the listed components were received. Console switch kit contents • Console switch • Power cords - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 16
each server or device. o USB o PS2 o Serial o HP BladeSystem • UTP CAT 5 or better cable • console switch with I/O connectors and the AC power inlet, facing downward (facing the floor). 1. Before installing the console switch into the rack, connect the console switch to a power source using the power - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 17
using four of the screws you removed. Discard the two remaining screws. 3. If not already installed, install a cage nut behind each rear rail. 4. Slide the console switch into the rear of the 1U product. 5. Secure the console switch to the rails using two M-6 screws, one on each side. Installing the - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 18
six screws, three on each side, from the console switch. 2. Attach the long 1U brackets to the console switch using four of the screws you removed. Discard the two remaining screws. 3. Install up to six cage nuts. 4. Secure the console switch to the rails using the appropriate number of M-6 screws - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 19
2. Attach the side-mounting brackets to the console switch using four of the screws you removed. Discard the two remaining screws. 3. Slide the side-mounting bracket tabs into the U locations on each side of the rack. Installing the console switch 19 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 20
the console switch 1. Connect the local keyboard, video, and mouse to the console switch. WARNING: To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature. • Plug the power cord into a grounded - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 21
system. 2. Plug the console switch power cord into a power source. The power supply status indicator LED illuminates. NOTE: UTP CAT5 cables are used throughout the examples in this guide. However, UTP CAT5 or better cables can be used for any connection. 3. Connect a UTP CAT5 cable to the LAN - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 22
software to configure your console switch, you must install it. The HP IP Console Viewer enables you to remotely organize and manage your local KVM and serial appliances, as well as any device connected to them within your datacenter. For more information, see the HP IP Console Viewer User Guide - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 23
Media and CAC HP Serial USBMC True Part number Prime function Optimal use AF605A 262588-B21 336047-B21 373035-B21 AF604A AF603A AF624A AF623A AF625A Local console access to a blade server For blade servers to connect to a KVM for local access KVM console access For servers that have PS - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 24
the HP USB with Virtual Media interface adapter to connect to your ProLiant server, test the functionality of your keyboard and mouse at the BIOS level before you load your operating system. 1. Connect a UTP CAT5 cable to the interface adapter connection port on the console switch. 2. Connect the - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 25
HP IP Console Switch G2 with Virtual HP Server Console Switch with Virtual Media Media HP IP Console Switch G2 with Virtual HP Server Console Switch G2 Media HP IP Console Switch G2 with Virtual HP Server Console Switch Media Supported features* Virtual Media Smart Card Virtual Media KVM KVM - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 26
Card HP Server Console Switch G2 with Virtual Media HP Server Console Switch with Virtual Virtual Media Media HP Server Console Switch G2 with Virtual Media HP Server Console Switch G2 KVM HP Server Console Switch G2 with Virtual Media HP Server Console Switch KVM *The listed supported - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 27
an HP Server Console Switch G2 cascade configuration Item 1 2 3 4 5 6 7 8 Description Servers Interface adapters (USB 2.0 interface adapter with Virtual Media or PS2 interface adapter with Virtual Media) UTP CAT5 cable Local console KVM cables Local console monitor Primary console switch Servers - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 28
support. To cascade the console switches: 1. Connect a UTP CAT5 or better cable to the interface adapter port on the console switch. 2. Connect the other end of the cable to the tiering port on the secondary console switch. Cascading an HP IP Console Switch G2 under an HP Server Console Switch - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 29
To cascade the console switches: 1. Connect a UTP CAT5 or better cable to the interface adapter port on the console switch. 2. Connect the other end of the cable to the tiering port on the secondary console switch. Cascading console switches 29 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 30
that are connected to the switch during real-time operation. For more information, see the HP IP Console Viewer User Guide. • Serial-Enables you to manage individual target devices using the serial console. Configuring the console switch using the local console UI For detailed instructions on using - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 31
username and password. 4. Select Login. The remote OBWI appears. Connecting to the remote OBWI through a firewall Any console switch installation that uses the remote OBWI for outside access must have four ports opened in a firewall. TCP port number 22 80 443 2068 Function Used by SSH during - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 32
the KVM switch through the firewall internal interface. For specific port forwarding instructions, see your firewall documentation. Using the user interfaces After you have successfully logged into either the local console UI or the remote OBWI, the user interface appears. Callou t 1 Component - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 33
name-Edit to match the name of the interface adapter it is connected to o Type-Lists the type of interface adapter o EID-Lists Firmware ("Upgrading the console switch firmware" on page 34) • Run Diagnostics • Ping • Save Appliance Configuration ("Saving the console switch configuration or user - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 34
• Save Application Trap MB Upgrading the console switch firmware HP recommends updating your console switch with the latest firmware available. CAUTION: Do not disconnect an interface adapter during a firmware upgrade or power cycling. The interface adapter becomes inoperable and must be returned to - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 35
-Enter the server IP address and firmware file to load. A username and password is required for authentication. Saving the console switch configuration or user database NOTE: To save or restore the console switch configuration or user database, you must be logged in to the console switch from the - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 36
. The larger the version number, the more current the firmware. System alerts In the top right-hand header of the interface, any current system alert appears. The following alerts might appear: • Power supply failure • Elevated ambient temperature • Fan failure Configuring the console switch 36 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 37
can make changes to the network settings. All other users can view network settings, but cannot make changes. General LAN speed, you must reboot the console switch. 2. Configure the following parameters: o LAN Speed o ICMP Ping Reply o HTTP Port o HTTPS Port 3. Configure the network settings for - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 38
2. Select the DNS Assignment Mode: o Manual o BOOTP o DHCPv6 3. Enter the DNS server addresses in the Primary, Secondary, and Tertiary can manage the switch as well as receive SNMP traps from the switch. If you enable SNMP, the console switch responds to all SNMP requests over UDP port 161. To - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 39
must be used in SNMP actions. These community names only apply to SNMP over UDP port 161, and they act as a password to protect the console switch. NOTE: To enable any workstation to manage the console switch, leave the Allowable Managers fields blank. 5. In the Allowable Managers fields, enter the - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 40
each SNMP trap you want sent to the management station. 3. Select Unit View>Appliance>Appliance Settings>Auditing>Destinations. The Event Destination page appears. Configuring the console switch 40 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 41
>Ports>IAs. The Appliance IAs page appears. 2. Select the checkbox next to the interface adapter you want to edit. 3. Select either Set USB 1.1 Speed or Set USB 2.0 Speed. Upgrading the interface adapter firmware Interface adapters can be automatically updated when the console switch firmware - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 42
• Enabling/Disabling local port user authentication, requiring users to log in to the interface. • Select a User Access Level, determining what user level can disconnect another user's KVM or serial session with a target device. To configure local port UI settings: Configuring the console switch 42 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 43
more methods of launching a local console UI session. 3. Configure the following parameters: o Local port user settings o Scan mode o Keyboard o Setup port settings Configuring sessions You can configure settings for the following session types: • General • KVM • Virtual Media • Serial Configuring - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 44
number of seconds you want to pass before the session times out. o In the Sharing field, select each checkbox you want to enable. Configuring the console switch 44 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 45
1. Select Unit View> Appliance> Appliance Settings> Sessions> KVM. The KVM Session Settings page appears. 2. Configure the following parameters: Widescreen. This resolution becomes the default resolution for the local console. Configuring Virtual Media Session settings NOTE: You can disable the - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 46
by the user that established the session. If you enable the Reserved setting, no other use can create a KVM connection to that device. 3. Select the Virtual Media Access Mode: o Read Only o Read/ Write 4. Set the encryption level: o None o 128 bit o DES o 3DES o AES Configuring the console switch 46 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 47
, you can use any Telnet or SSH compliant software, such as PuTTY or an OS command prompt to connect to the console switch. After authentication, you are prompted for the name of the interface adapter you want to connect to. User accounts The local console UI and remote OBWI require login security - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 48
View>Appliance>Appliance Settings>User Accounts>Local. The Appliance Local User Accounts page appears. 2. Configure Security Lock-outs. If you enable security lock-outs, the lock-out is activated on the fifth failed login attempt, per user account. To add a user: Configuring the console switch 48 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 49
the checkbox next to the user you want to edit. 2. Select Edit, and then modify the user account. To delete a user: 1. Select the checkbox next to the user you want to delete. 2. Select Delete. MergePoint Access settings To configure MergePoint Access settings: Configuring the console switch 49 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 50
1. Select Unit View>Appliance>Appliance Settings>User Accounts>MergePoint Access. The Appliance MergePoint Access Settings page LDAP authentication server communication errors. You can configure the LDAP authentication priority and server connection information. Configuring the console switch 50 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 51
device are sent as non-secure clear text. Use LDAPS for secure encrypted communication. For more information about LDAP configuration, see the HP IP Console Viewer User Guide. LDAP search To configure the parameters when searching for LDAP directory service users: Configuring the console switch 51 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 52
user that the target device uses to log into the directory service. Once the target device is authenticated, the directory service grants it access to the directory to perform the user authenticate the administrator or user specified in the Search the search criteria for user ID searches of LDAP - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 53
to access the console switch itself. o Target Device-Used to authenticate users attempting to access attached target devices. There are three different modes available: o Basic-A username and password query for the user is sent to the directory service. Once verified, the user is given access - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 54
set to User Attribute or Group Attribute. The default value is info. Override admin The Override Admin account is the administrative account built in to the console switch. It only authenticates locally in the console switch. Connections To view all connections from the console switch, select Unit - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 55
and launch a KVM Session. Scan mode NOTE: Scan mode is only available when you are using the local console UI or the HP IP Console Viewer software. If you are using remote OBWI, the Scan button is disabled. In Scan mode, the console switch automatically scans from port to port (target device to - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 56
time interval, see Local console UI settings (on page 42). Disconnecting an active session 1. Select Unit View>Active Sessions. The Appliance Sessions page appears. 2. Select the checkbox next to the target device session you want to close. 3. Select Disconnect. Configuring the console switch 56 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 57
KVM session with target devices attached to a console switch using the remote OBWI. When you connect MB of memory per window HP recommends having no more than three user if your preemption level is equal or greater than the other user's level. An appliance administrator can disconnect an active user - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 58
To access the menu bar, place your cursor in the middle bottom of the title bar. Menu bar-Enables you to access features Server desktop-Enables you to interact with the server through this desktop Align Local Cursor icon-Enables you to reestablish proper tracking of the local cursor to the remote - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 59
Select OK to save and close. Launching a session NOTE: If a user connects to a target device with a higher screen resolution than the local computer and toolbar are locked to remain visible. • Enable automatic, full, or manual scaling of the session image. o Automatic scaling-The desktop window is - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 60
o Manual scaling-A menu of supported image scaling resolutions appears. • Change the color depth of through the Video Session Viewer, see the "Managing remote servers through the Video Session Viewer" section in the HP IP Console Viewer User Guide. Closing a session To close a Video Viewer session, - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 61
of the USB ports located on the rear of the console switch. In addition, you can connect Virtual Media from any remote workstation that is running the HP IP Console Viewer and is connected to a server using an HP IP Console Switch with Virtual Media. All USB ports of a local console are assigned to - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 62
. For example, a remote user using the HP IP Console Viewer cannot use a Virtual Media resource attached to the local console USB hub. Only Virtual Media resources directly connected to the client's computer, running the HP IP Console Viewer, can be mapped to a target server. You can have one CD - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 63
a tiered environment, only User A can access the lower switch and the KVM channel between the upper switch and lower switch. If User B is allowed to access the session, User B can control the Video Session Viewer. For more information, see the HP IP Console Viewer User Guide. Using Virtual Media 63 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 64
also have an interface adapter with Virtual Media connecting each server to the console switch. Item 1 2 3 4 5 6 Description Local user USB media device Console switch (HP Server Console Switch with Virtual Media or HP IP Console Switch with Virtual Media) USB 2.0 interface adapter with Virtual - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 65
on cascading, see Cascading console switches (on page 25). Item 1 2 3 4 5 6 7 Description Local user USB media device Console switch (HP Server Console Switch with Virtual Media or HP IP Console Switch with Virtual Media) Secondary console switch (HP Server Console Switch with Virtual Media) USB - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 66
capable interface adapter. You can connect smart card readers directly to the console switch using local USB ports, or you can connect smart card readers to any remote workstation. The smart card reader must be connected prior to starting a console session with the server. For more information about - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 67
using TCP/IP. Based on the X.500 Directory Services model, LDAP is a global directory structure that supports strong security features, including authentication, privacy, and integrity. If individual user accounts are stored on an LDAP-enabled directory service, such as Active Directory, you can use - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 68
100Base-T or 1000Base-T network for improved performance. Connect the network cable from the LAN port on the rear panel of the console switch to an Ethernet switch, and power on the console switch. For more information, see the HP IP Console Viewer User Guide included on the CD provided with this - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 69
and press Enter. 9. From the command prompt, enter Minicom. As soon as a connection is established, the main menu for the console switch appears. Follow the on-screen options to configure the console switch. The HyperTerminal menu appears. Using the Main Menu The following configuration options are - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 70
The Enable Debug Messages option enables you to debug the system. Select yes to debug the system. Reset Appliance The Reset Appliance option reboots the server console switch. Exit The Exit option allows you to exit the Main Menu - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 71
bit key and the EID number of the console switch appear. 3. Call the HP technical support phone number (1-800-474-6836). Give the service person your 16-bit key and EID number of the console switch. A one-time password, which is specific to your console switch, is given to you. 4. Enter the one-time - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 72
local UI or remote OBWI. For more information, see Upgrading the console switch firmware (on page 34) or Upgrading the interface adapter firmware (on page 41). Before beginning the upgrade procedure, be sure that the Secure TFTP Server is installed and that the GET access permissions for the folder - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 73
systems NOTE: The following example uses Red Hat Linux 3.0. For more information, refer to your Linux operating system Help or documentation. 1. Verify that the in.tftpd service is running with the following ps -ef | grep tftpd. By default the /etc/xinetd.d/tftp configuration file uses /tftpboot as - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 74
switch troubleshooting Problem Troubleshooting The console switch is not working properly. The console switch hangs after reboot. One of the power supply status indicator LEDs does not appear and the other blinks irregularly. The system does not recognize the cascaded console switches. Servers - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 75
. Connection length table The console switch offers optimum video performance when the distance between the server and console switch is 15 m (50 ft) or less. The system is capable of operation at distances up to 30.5 m (100 ft), at reduced video resolutions. Standard 4x3 Total cable length - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 76
do I know which port my cascaded console switch is connected to? How do I locally connect a cascaded console switch? How do I view my console switch firmware version? How do I view my interface adapter firmware version? What kind of UTP cables are supported? Language-specific keyboard emulation in - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 77
/us/en/wwcontact.html). For HP technical support: • In the United States, for contact options see the Contact HP United States webpage (http://welcome.hp.com/country/us/en/contact_us.html). To contact HP by phone: o Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 78
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at personal expense. FCC rating - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 79
O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 • 1-800-HP-INVENT (1-800-474-6836). (For continuous quality improvement, calls may be recorded may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/ - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 80
for this device can be found on the HP website (http://www.hp.com/go/certificates). Disposal of waste equipment by users in private households in the European Union This city office, your household waste disposal service or the shop where you purchased the product. Regulatory compliance notices 80 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 81
Japanese notice Korean class A notice Power cord statement for Japan Regulatory compliance notices 81 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 82
Protocol CAC Common Access Card CRC cyclic redundant checks EID electronic identification number FTP file transfer protocol G2 Generation 2 GNOME GNU Network Object Model Environment HP SIM HP Systems Insight Manager IA interface adapter ID identification Acronyms and abbreviations 82 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 83
IP Internet Protocol KVM keyboard, video, and mouse LAN local-area network LDAP Lightweight Directory Access Protocol interface RPM Red Hat Package Manager SIM Systems Insight Manager SLES SUSE Linux Enterprise Server SSH Secure Shell TCP Transmission Control Protocol Acronyms and abbreviations 83 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 84
TFTP Trivial File Transfer Protocol UI user interface USB universal serial bus UTP unshielded twisted pair VGA video graphics array Acronyms and abbreviations 84 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 85
(FCC) notice 78, 79 firewall settings, configuring 31 firmware, upgrading 72 firmware, upgrading console switch 34 frequently asked questions 76 G General network settings 37 H HP IP Console Viewer 22 HP technical support 77 HyperTerminal, configuring 68 I installation checklist 15 Index 85 - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 86
selecting 23 interface adapter, upgrading firmware 41 interface adapter, USB speed 41 interface adpater, LEDs 22 interface, browser 30 IP console switch components 10 J Japanese notice 81 K kit contents 15 Korean notices 81 KVM switching capabilities 7 L LAN connections, establishing 68 LDAP, Active - HP 336045-B21 | HP IP and Server Console Switches G2 User Guide - Page 87
appliance 33 troubleshooting 74 true serial 8 U upgrade firmware 72 upgrading console switch firmware 34 upgrading interface adapter firmware 41 USB 2.0 composite device limitations 61 user accounts 47 user accounts, local 48 user database, restoring 35 user database, saving 35 user interfaces 8, 30
HP IP and Server Console Switches G2
User Guide
Part Number 585313-001
September 2009 (First Edition)