HP 3PAR StoreServ 7200 2-node HP 3PAR StoreServ 7000/7450 Storage Cabling Conf
HP 3PAR StoreServ 7200 2-node Manual
View all HP 3PAR StoreServ 7200 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 3PAR StoreServ 7200 2-node manual content summary:
- HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 1
HP 3PAR StoreServ 7000/7450 Storage Cabling Configuration Guide B: 2 Node Systems with Large 3.5-inch Drive Enclosures Abstract This guide provides cabling information for authorized technicians performing installation and maintenance services on the HP 3PAR StoreServ 7000/7450 Storage systems. HP - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 3
Following Precautions...4 Identifying and Labeling the Components 4 2 Cabling HP 3PAR StoreServ 7000/7450 7 2 Node 1 Drive Enclosures (1L 7 Attach DP-1 Chains to Enclosures 8 Attach DP-2 Chains to Enclosures 9 Review Completed Cabling 10 2 Node 2 Drive Enclosures (2L 11 Attach DP-1 Chains to - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 4
while servicing the HP 3PAR StoreServ Storage system: • guide. The guide provides instructional guidance for cabling the HP 3PAR StoreServ 7000/7450 according to a specific configuration. All HP 3PAR StoreServ Storage systems contain either the HP 3PAR 7200 (2 nodes) or 7400/7450 (with 2 or 4 nodes - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 5
Types of Components Use the red and green color coding to assist with the cabling. Only connect to components sharing the same color. Figure 1 Identifying Components and SAS Ports Identifying and Labeling the Components 5 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 6
depiction may not reflect the configuration setup of your system but the labeling pattern is similar. Figure 2 Labeling the Enclosures For more information relating to cabling hosts, refer to HP 3PAR StoreServ 7000/7450 Installation Guide. 6 Cabling Preparation for HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 7
2 Cabling HP 3PAR StoreServ 7000/7450 The following illustrative sections provide a rear view of the rack with recommended racking configuration of the system. 2 Node 1 Drive Enclosures (1L) Before you begin cabling the storage system, carefully read or print the following section, including figures - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 8
Attach DP-1 Chains to Enclosures This system does not require any connections to node port DP-1. 8 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 9
enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 10
Review Completed Cabling 10 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 11
2 Node 2 Drive Enclosures (2L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 2 Drive Enclosures (2L) 11 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 12
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 12 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 13
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 14
Review Completed Cabling 14 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 15
2 Node 3 Drive Enclosures (3L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 3 Drive Enclosures (3L) 15 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 16
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 16 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 17
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 18
Review Completed Cabling 18 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 19
2 Node 4 Drive Enclosures (4L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 4 Drive Enclosures (4L) 19 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 20
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 20 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 21
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 22
Review Completed Cabling 22 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 23
2 Node 5 Drive Enclosures (5L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 5 Drive Enclosures (5L) 23 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 24
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 24 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 25
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 26
Review Completed Cabling 26 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 27
2 Node 6 Drive Enclosures (6L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 6 Drive Enclosures (6L) 27 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 28
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 28 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 29
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 30
Review Completed Cabling 30 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 31
2 Node 7 Drive Enclosures (7L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 7 Drive Enclosures (7L) 31 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 32
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 32 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 33
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 34
Review Completed Cabling 34 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 35
2 Node 8 Drive Enclosures (8L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 8 Drive Enclosures (8L) 35 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 36
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 36 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 37
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 38
Review Completed Cabling 38 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 39
2 Node 9 Drive Enclosures (9L) Before you begin cabling the storage system, carefully read or print the following section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 2 Node 9 Drive Enclosures (9L) 39 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 40
. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 40 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 41
enclosure closest to the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 42
Review Completed Cabling 42 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7200 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 43
3PAR F-Class storage systems Support Request StoreServ 7000/7450 Storage 3PAR or 3PAR Storage HP 3PAR Documentation For additional information about other related cabling configurations, refer to the following documents: • HP 3PAR StoreServ 7000/7450 Storage Cabling Configuration Guide A: 2 Node
HP 3PAR StoreServ 7000/7450 Storage
Cabling Configuration Guide B:
2 Node Systems with Large 3.5-inch Drive
Enclosures
Abstract
This guide provides cabling information for authorized technicians performing installation and maintenance services on the HP
3PAR StoreServ 7000/7450 Storage systems.
HP Part Number: QR482-96397
Published: June 2013