HP 3PAR StoreServ 7400 2-node HP 3PAR StoreServ 7000/7450 Storage Cabling Conf
HP 3PAR StoreServ 7400 2-node Manual
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 3PAR StoreServ 7400 2-node manual content summary:
- HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 1
HP 3PAR StoreServ 7000/7450 Storage Cabling Configuration Guide A: 2 Node Systems with Small 2.5-inch Drive Enclosures Abstract This guide provides cabling information for authorized technicians performing installation and maintenance services on the HP 3PAR StoreServ 7000/7450 Storage systems. HP - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 3
4 Following Precautions...4 Identifying and Labeling the Components 4 2 Cabling HP 3PAR StoreServ 7000/7450 7 2 Node 1 Drive Enclosures (1S 7 Attach DP-1 Chains to Enclosures 8 Attach DP-2 Chains to Enclosures 8 Review Completed Cabling 9 2 Node 2 Drive Enclosures (2S 10 Attach DP-1 Chains to - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 4
while servicing the HP 3PAR StoreServ Storage system: • guide. The guide provides instructional guidance for cabling the HP 3PAR StoreServ 7000/7450 according to a specific configuration. All HP 3PAR StoreServ Storage systems contain either the HP 3PAR 7200 (2 nodes) or 7400/7450 (with 2 or 4 nodes - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 5
Types of Components Use the red and green color coding to assist with the cabling. Only connect to components sharing the same color. Figure 1 Identifying Components and SAS Ports Identifying and Labeling the Components 5 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 6
depiction may not reflect the configuration setup of your system but the labeling pattern is similar. Figure 2 Labeling the Enclosures For more information relating to cabling hosts, refer to HP 3PAR StoreServ 7000/7450 Installation Guide. 6 Cabling Preparation for HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 7
2 Cabling HP 3PAR StoreServ 7000/7450 The following illustrative sections provide a rear view of the rack with recommended racking configuration of the system. 2 Node 1 Drive Enclosures (1S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 8
routing Connect Node 0 (DP-2) to the I/O 0 (DP-1) on the B drive enclosure closest to the controller. Green routing Connect Node 1 (DP-2)to I/O 1 on the B drive enclosure farthest from the controller. NOTE: The two adjacent enclosures are not directly connected. 8 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 9
Review Completed Cabling 2 Node 1 Drive Enclosures (1S) 9 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 10
2 Node 2 Drive Enclosures (2S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 10 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 11
Attach DP-1 Chains to Enclosures Red routing Connect Node 0 (DP-1) to the I/O 0 (DP-1) on the A drive enclosure closest to the controller. Green routing Connect Node 1 (DP-1)to I/O 1 (DP-1)on the A drive enclosure farthest from the controller. NOTE: The two adjacent enclosures are not directly - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 12
routing Connect Node 0 (DP-2) to the I/O 0 (DP-1) on the B drive enclosure closest to the controller. Green routing Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. NOTE: The two adjacent enclosures are not directly connected. 12 Cabling HP 3PAR StoreServ 7000 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 13
Review Completed Cabling 2 Node 2 Drive Enclosures (2S) 13 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 14
2 Node 3 Drive Enclosures (3S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 14 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 15
Attach DP-1 Chains to Enclosures Red routing Connect Node 0 (DP-1) to the I/O 0 (DP-1) on the A drive enclosure closest to the controller. Green routing Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. NOTE: The two adjacent enclosures are not directly - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 16
. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the "B" drive enclosure farthest from the controller. 2. Connect all "B" drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: No two adjacent enclosures are directly connected. 16 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 17
Review Completed Cabling 2 Node 3 Drive Enclosures (3S) 17 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 18
2 Node 4 Drive Enclosures (4S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 18 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 19
enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 20
. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 20 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 21
Review Completed Cabling 2 Node 4 Drive Enclosures (4S) 21 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 22
2 Node 5 Drive Enclosures (5S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 22 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 23
enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 24
. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 24 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 25
Review Completed Cabling 2 Node 5 Drive Enclosures (5S) 25 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 26
2 Node 6 Drive Enclosures (6S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 26 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 27
enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 28
. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 28 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 29
Review Completed Cabling 2 Node 6 Drive Enclosures (6S) 29 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 30
2 Node 7 Drive Enclosures (7S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 30 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 31
enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 32
. Green routing 1. Connect Node 1 (DP-2) to I/O 1 (DP-1) on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 32 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 33
Review Completed Cabling 2 Node 7 Drive Enclosures (7S) 33 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 34
2 Node 8 Drive Enclosures (8S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 34 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 35
enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 36
. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 36 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 37
Review Completed Cabling 2 Node 8 Drive Enclosures (8S) 37 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 38
2 Node 9 Drive Enclosures (9S) Before you begin cabling the storage system, carefully read or print the section, including figures 1 and 2, "Identifying and Labeling the Components" (page 4). 38 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 39
enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 40
. Green routing 1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller. 2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 40 Cabling HP 3PAR StoreServ 7000/7450 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 41
Review Completed Cabling 2 Node 9 Drive Enclosures (9S) 41 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 42
3PAR F-Class storage systems Support Request StoreServ 7000/7450 Storage 3PAR or 3PAR Storage HP 3PAR Documentation For additional information about other related cabling configurations, refer to the following documents: • HP 3PAR StoreServ 7000/7450 Storage Cabling Configuration Guide A: 2 Node
HP 3PAR StoreServ 7000/7450 Storage
Cabling Configuration Guide A:
2 Node Systems with Small 2.5-inch Drive
Enclosures
Abstract
This guide provides cabling information for authorized technicians performing installation and maintenance services on the HP
3PAR StoreServ 7000/7450 Storage systems.
HP Part Number: QR482-96452
Published: August 2013
Edition: 1