HP 3PAR StoreServ 7400 2-node HP 3PAR StoreServ 7000 SmartStart 1.2 User&#
HP 3PAR StoreServ 7400 2-node Manual
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 3PAR StoreServ 7400 2-node manual content summary:
- HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 1
HP 3PAR StoreServ 7000 Storage SmartStart 1.2 Software User's Guide Abstract This document provides the information needed to use HP 3PAR SmartStart to install and configure HP 3PAR StoreServ 7000 Storage systems. HP Part Number: QL226-96854 Published: June 2013 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 2
L.P. Confidential computer software. Valid license from HP required for possession, use or copying. HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 3
19 Validating Remote Support 19 Troubleshooting System Setup 20 Collecting SmartStart Log Files 20 Collecting Service Processor Log Files 20 Contacting HP Support about System Setup 21 Verifying the HP 3PAR OS on the Service Processor 21 4 Connect to the HP 3PAR StoreServ 7000 Storage System - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 4
Summary: Add Virtual Volumes to Windows Wizard 38 7 Install the HP 3PAR Management Console 39 II Understanding Storage 40 8 Storage Software Components 41 55 17 Support and Other Resources 57 Contacting HP...57 HP 3PAR documentation...57 Typographic conventions...60 HP 3PAR branding information - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 5
18 Documentation feedback 61 Glossary...62 Contents 5 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 6
highly recommends that you read this short introduction. 3. Set up the Service Processor and the HP 3PAR StoreServ 7000 "Setting Up the Service Processor" (page 13) Storage system. "Setting Up the HP 3PAR StoreServ Storage System" (page 17) 4. Connect to your new storage system. 5. Configure Fibre - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 7
Welcome to HP 3PAR SmartStart for HP 3PAR StoreServ 7000 Storage systems. SmartStart helps you configure: • HP 3PAR StoreServ 7200 Storage system • HP 3PAR StoreServ 7400 Storage system • HP 3PAR StoreServ 7450 Storage system NOTE: If you are setting up multiple HP 3PAR StoreServ 7000 Storage - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 8
Accessing Online Help To view online help, do one of the following: • Press F1. • Select Help→Online Help. 8 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 9
the HP 3PAR StoreServ 7000 Storage Installation Guide, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par A DHCP network is no longer required to set up a virtual Service Processor (VSP). For more information about how to manually set - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 10
Site Planning Manual. - Service Processor information - The Service Processor IP address, subnet mask, and gateway IP address For more information about determining the temporary IP address and assigning the permanent IP address, see the HP 3PAR StoreServ 7000 Storage Installation Guide. - Host name - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 11
Storage" (page 40) FAQ 1 What is HP 3PAR SmartStart? HP 3PAR SmartStart is an installation wizard for your HP 3PAR StoreServ 7000 Storage systems. SmartStart enables you to: • Initialize the HP 3PAR Service Processor • Initialize the HP 3PAR StoreServ 7000 Storage system • Configure FC and iSCSI - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 12
HP 3PAR SmartStart includes online help. To access online help, do one of the following: • Press F1. • Select Help > Online Help. You can also find storage-related information at: http://www.hp.com/storage 12 Prepare to Configure - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 13
systems, to set up the Service Processor and the HP 3PAR StoreServ Storage system. You need to set up the Service Processor and the storage system only once for each new HP 3PAR storage system. NOTE: After you have completed Service Processor setup, the Service Processor Setup wizard does not allow - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 14
the HP 3PAR StoreServ 7000 Site Planning Manual. Configuring Remote Support Remote Support enables HP to proactively provide you the best possible support for your HP 3PAR StoreServ Storage system, including: • Timely remote service • Remote online software updates • Accelerated troubleshooting and - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 15
Service Processor configuration. This wizard will enable Remote Support upon completion. Configuring System Support Information To enable you to receive Remote Support zones used in this wizard are based on the time zones listed in the and set up your HP 3PAR StoreServ Storage system. The setupusr - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 16
the HP 3PAR StoreServ 7000 Storage Installation Guide. To access the HP 3PAR StoreServ 7000 Storage Installation Guide, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par 2. Use the new permanent IP address to restart the Service Processor - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 17
address. For more information about Service Processor IP addresses, see the HP 3PAR StoreServ 7000 Storage Installation Guide. 4. Enter the user name setupusr. 5. Enter the password for setupusr that you created in the Service Processor Setup wizard. Troubleshooting Access If you cannot access the - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 18
your completed Storage System Software Installation Checklist from the HP 3PAR StoreServ 7000 Site Planning Manual. Configuring Your Time Zone You can do the following: • Copy the time zone settings from the Service Processor to the HP 3PAR StoreServ Storage system. • Enter a specific date and time - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 19
, see "Validating Remote Support" (page 19). 4. Continue to SmartStart wizard step 3, Connect to the storage system. Troubleshooting: Adding the Storage System to the Service Processor If the wizard cannot successfully add your HP 3PAR StoreServ 7000 Storage system to the Service Processor, use the - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 20
more information, see the HP 3PAR Service Processor Onsite Customer Care (SPOCC) User's Guide. For more information about Remote Support, see "Configuring Remote Support" (page 14). Troubleshooting System Setup If you cannot access the Service Processor Setup wizard, the Service Processor, or the - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 21
to the SmartStart wizard. For more information, see the HP 3PAR Service Processor Onsite Customer Care (SPOCC) User's Guide. To access this document, go to the HP 3PAR StoreServ Storage site, and then click the Support link for your product: http://www.hp.com/go/3par Troubleshooting System Setup 21 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 22
storage system one or more times, select the storage system from the list. 3. Enter the user name and password. To access your new HP 3PAR StoreServ 7000 Storage system for the first time, enter 3paradm and the new password for 3paradm that you created in the Storage System Setup wizard. CAUTION - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 23
To export (or present) virtual volumes to hosts-which enables the host system to write data to and read data from the HP 3PAR StoreServ Storage system-you must configure either Fibre Channel host connections or iSCSI host connections. For more information about exporting volumes, see "Exporting - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 24
Windows Server 2012 and Windows Server 2008 Implementation Guide (see Setting Up and Zoning the Fabric). To access this document, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par NOTE: SmartStart will configure the port mode depending - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 25
(read from or write data to) the HP 3PAR StoreServ Storage system. For more information about setting up Fibre Channel connections, see the HP 3PAR Windows Implementation Guide. To access this document, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 26
Validate. SmartStart automatically detects and lists the HBAs that are installed on the host system. 2. Verify that at least two of the listed HBAs are supported by your HP 3PAR StoreServ Storage system. To verify your system's HBAs, go to the Single Point of Connectivity Knowledge for - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 27
only one supported Fibre Channel connection and that connection fails, the host will not be able to access (read from or write data to) the HP 3PAR storage system. The redundancy of two Fibre Channel connections, each connected to a different HP 3PAR StoreServ Storage system node, creates connection - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 28
: • Connect the local host (the Windows Server 2008 R2 or Windows Server 2012 server into which you inserted the SmartStart media) to the HP 3PAR StoreServ Storage system. • Connect a remote host (any Windows Server 2008 R2 or Windows Server 2012 server other than the Windows Server 2008 R2 or - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 29
group box, select whether to obtain the address automatically or enter it manually. To enter the IP address manually, enter the IP address, subnet mask address, and gateway address of the target iSCSI port on your HP 3PAR StoreServ 7000 Storage system. 4. From the MTU list, select the MTU size. The - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 30
. To do this, ping the HP 3PAR StoreServ Storage system from the host. Troubleshooting Task Completion If SmartStart displays the Failed to validate whether the current Windows task is complete message, click Configure again. If the problem persists, contact HP support. For more information, see - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 31
6 Configure Storage The steps in SmartStart wizard step 5, Configure storage, guide you through creating basic storage on your HP 3PAR StoreServ 7000 Storage system. NOTE: You can use the HP 3PAR Management Console to delete any hosts, virtual volumes, or exports you create using SmartStart. To do - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 32
creates default CPGs on your HP 3PAR StoreServ 7000 Storage system. The CPGs that are created depend on your HP 3PAR storage system's drive types, Windows wizard, accessed from SmartStart wizard step 5, Configure storage, guides you through configuring virtual volumes on a Windows Server 2008 R2 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 33
Host Settings 1. In the General group box: a. System - Select the system to create the new host. b. Domain - Select the domain in which to create the new host. Select if not applicable. c. Name - Enter the host name. Names are case-sensitive. d. Set Name - Select the host set in which to - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 34
c. If required, click the Target CHAP check box. The CHAP Name field displays the system name. d. Enter a secret/password in the CHAP Secret field for Target CHAP. NOTE: Rules for the CHAP group box in the following step are as follows: • When the Initiator CHAP check box is selected, CHAP Name is - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 35
results in the creation of a Thinly Provisioned Virtual Volume (TPVV). Selecting Fully Provisioned results in the creation of a base volume. NOTE: To create TPVVs, the HP 3PAR Thin Provisioning Software license is required. b. Size - Enter the size of the volume. Change the Size list value - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 36
1. In the Policies group box, enable any of the following, as needed: • Allow stale snapshots • Restrict export to one host • Enable zero detect (default) • Retention Time - If you enable this, enter a value in the corresponding field, and then select either days or hours. • Expiration Time - If you - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 37
apply when configuring virtual volumes on your Windows Server 2008 R2 or Windows Server 2012 server: • You do not have to be connected to the HP 3PAR StoreServ Storage system to add volumes to Windows. • To use SmartStart to format volumes as Windows disks, you must use Microsoft NTFS. • If you have - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 38
device setup, and then click Finish. Troubleshooting Task Completion If SmartStart displays the Failed to validate whether the current Windows task is complete message, click Finish again. If the problem persists, contact HP support. For more information, see "Support and Other Resources" (page 57 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 39
To manage your HP 3PAR StoreServ Storage systems and access advanced features and functionality, use the HP 3PAR Management Console. To install the Management Console, click the Install the HP 3PAR Management Console link. Accessing the Management Console To access the HP 3PAR Management Console do - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 40
more information about storage concepts, see the HP 3PAR StoreServ Storage Concepts Guide. To access this document, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par For information about supported hardware and software platforms, go to - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 41
that physically store your data and the software applications that manage your data. An HP 3PAR storage system is composed of the following logical data layers: • Physical disks • Chunklets-On an HP 3PAR StoreServ 7000 Storage system, chunklets are 1-GB units of disk space • Logical disks-Advanced - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 42
. For more information, see the HP 3PAR Management Console User Guide or the HP 3PAR StoreServ Storage Concepts Guide. To access these documents, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par Common Provisioning Groups A common - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 43
Software license is required. • Physical copies-A full copy of a volume. No separate license is required to create physical copies. • Virtual copies-A snapshot of a base volume that only records changes to the base volume. To create virtual copies, the HP 3PAR Virtual Copy license is required. 43 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 44
on a host connected to an HP 3PAR StoreServ Storage system. On Windows, the Host Explorer agent runs as a service. A separate license is not required to use the HP 3PAR Host Explorer Software agent. The Host Explorer agent communicates with the HP 3PAR StoreServ Storage system over a Fibre Channel - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 45
each WWN or iSCSI name belongs to, and you must manually assign each WWN or iSCSI name to a host. How HP 3PAR Host Explorer User's Guide. To access this document, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par For a list of supported - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 46
threshold. Monitoring CPG Growth CPGs require careful planning and monitoring to prevent them from becoming so large that they set off the HP 3PAR StoreServ Storage system's built-in safety mechanisms. These safety mechanisms prevent a CPG from consuming all free space on the system, but they work - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 47
Thin volumes in small increments for each controller node, but can adjust the size of these increments based on the rate of consumption (allocating more to prevent them from becoming so large that they set off the HP 3PAR StoreServ Storage system's built-in safety mechanisms or that writes to the - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 48
to lose synchronization with each other; however, you can resynchronize the volumes. For more information about how to resynchronize a base and destination volume, see the HP 3PAR Management Console Online Help. To reduce the number of management tasks that involve physical copies, you can: • Create - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 49
-on-write techniques, which are available only with the HP 3PAR Virtual Copy Software license. Thousands of snapshots of each Depending on your system configuration, you can make up to 500 virtual copies of a base volume. To reduce the number of management tasks around physical copies, you can: • - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 50
Volume-LUN pairing (VLUN). To export virtual volumes, use the HP 3PAR Management Console. For more information, see the HP 3PAR Management Console Online Help. For more information about the maximum number of VLUNs that are supported for each host that has your specific system configuration, see the - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 51
in the set. For more information about the implementation of RAID in HP 3PAR storage systems, see the HP 3PAR StoreServ Storage Concepts Guide. To access this document, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par RAID Types 51 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 52
to each role, see the HP 3PAR Command Line Interface Administrator's Manual. For instructions about performing user-management tasks, see the HP 3PAR Management Console User Guide. To access these documents, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 53
HP 3PAR Management Console User's Guide. To access this document, go to the HP 3PAR StoreServ Storage site and click the Support link for your product: http://www.hp.com/go/3par Setting Up Alert Emails To configure your HP 3PAR the HP 3PAR Service Processor Onsite Customer Care (SPOCC) Online Help. - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 54
about: Accessing related HP 3PAR documentation Troubleshooting SmartStart Definitions for HP 3PAR terms See: "Additional Resources" (page 55) Troubleshooting SmartStart The HP 3PAR StoreServ Storage Systems Guided Troubleshooting site: http://www.hp.com/support/hpgt/3par "Glossary" (page 62 - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 55
guide, go to the HP 3PAR StoreServ Storage site, and then click the Support link for your product: http://www.hp.com/go/3par • Go to the HP 3PAR StoreServ Storage Systems Guided Troubleshooting site: http://www.hp.com/support/hpgt/3par To troubleshoot setting up the Service Processor or the HP 3PAR - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 56
"Troubleshooting System Setup" (page 20) 56 Additional Resources - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 57
of support you are requesting: HP 3PAR storage system HP 3PAR StoreServ 7200, 7400, and 7450 Storage systems HP 3PAR StoreServ 10000 Storage systems HP 3PAR T-Class storage systems HP 3PAR F-Class storage systems Support request StoreServ 7000 Storage 3PAR or 3PAR Storage HP 3PAR documentation - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 58
detailed alert information HP 3PAR F-Class, T-Class, and StoreServ 10000 Storage Troubleshooting Guide Installing, configuring, and maintaining the HP 3PAR Policy HP 3PAR Policy Server Installation and Setup Guide Server HP 3PAR Policy Server Administration Guide 58 Support and Other Resources - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 59
3PAR StoreServ 7000 Storage Service Guide HP 3PAR StoreServ 7450 Storage Service Guide Troubleshooting 7200, 7400, and 7450 storage systems HP 3PAR StoreServ 7000 Storage Troubleshooting Guide HP 3PAR StoreServ 7450 Storage Troubleshooting Guide Maintaining the Service Processor HP 3PAR Service - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 60
followed as directed in order to achieve a functional and supported implementation based on testing at HP. HP 3PAR branding information • The server previously referred to as the "InServ" is now referred to as the "HP 3PAR StoreServ Storage system." • The operating system previously referred to as - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 61
18 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback ([email protected]). Include the document title and part number, version number, or the URL when - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 62
VLUNs that are not active will not communicate with the HP 3PAR StoreServ Storage system. User-defined threshold that can be set number). An iSCSI PCI host bus adapter (HBA) located in a controller node. An iSCSI adapter connects a controller node on an iSCSI port to a host. The name of an iSCSI - HP 3PAR StoreServ 7400 2-node | HP 3PAR StoreServ 7000 SmartStart 1.2 User&# - Page 63
(CPG) and is therefore capable of growing on demand. For standard base volumes, the data that is written to the user space. A types of VLUN templates are host-sees, port-presents, and matched-set. Virtual Service Processor. World-Wide Name. A unique 64-bit value used to identify Fibre Channel
HP 3PAR StoreServ 7000 Storage SmartStart
1.2 Software User's Guide
Abstract
This document provides the information needed to use HP 3PAR SmartStart to install and configure HP 3PAR StoreServ 7000
Storage systems.
HP Part Number: QL226-96854
Published: June 2013