HP 4100n HP LaserJet 4100 Series - User Guide - Page 104

Clearing jams from the input tray areas Tray 1 1 Slowly pull the paper out of the printer. If part of the paper has already been pulled into the printer, follow the steps under "Clearing jams from the top cover and toner cartridge areas" on page 98. Trays 2, 3, and 4 For all other trays, follow the steps below 2 (see "Clearing jams from the optional envelope feeder" on page 100 for clearing envelope feeder jams). 1 Slide the tray out of the printer, and remove any damaged paper from the tray. 2 If the edge of the paper is visible in the feed area, slowly pull the paper 3 down and out of the printer. (Do not pull the paper straight out or it will tear.) If the paper is not visible, look in the top cover area (see "Clearing jams from the top cover and toner cartridge areas" on page 98). Note Do not force the paper if it will not move easily. If the paper is stuck in a tray, try removing it through the tray above (if applicable) or through the top cover area. 3 Make sure the paper is flat in the tray at all four corners and below the front and back tabs. Continued on the next page. 102 Chapter 4 - Problem solving EN