HP 4100n HP LaserJet 4100 Series - User Guide - Page 137
Curl or wave, Wrinkles or creases, Vertical white lines
View all HP 4100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Curl or wave 1 Turn over the stack of paper in the tray. Also, try rotating the paper 180°. 2 Make sure that paper type and quality meet HP specifications (see "Paper specifications" on page 188). 3 Make sure that the environmental specifications for the printer are being met (see "Printer specifications" on page 200). 4 Try printing to a different output bin. 5 If media is lightweight and smooth, try using a low fuser mode to reduce the heat in the fusing process. At the printer control panel, use CONFIGURE FUSER MODE MENU on the Paper Handling Menu to do this (see "Paper Handling Menu" on page 210). Wrinkles or creases 1 Print a few more pages to see if the problem corrects itself. 2 Make sure that the environmental specifications for the printer are being met (see "General specifications" on page 202). 3 Turn over the stack of paper in the tray. Also, try rotating the paper 180°. 4 Make sure that paper is loaded correctly, all adjustments have been made, and the paper is under the corner tabs (see "Loading tray 1" on page 46 and "Loading trays 2, 3, and 4" on page 47). 5 Make sure that paper type and quality meet HP specifications (see "Paper specifications" on page 188). 6 If envelopes are creasing, try storing envelopes so that they lie flat. Vertical white lines 1 Print a few more pages to see if the problem corrects itself. 2 Make sure that paper type and quality meet HP specifications (see "Paper specifications" on page 188). 3 Replace the toner cartridge. EN Correcting output quality problems 135