HP 4100n HP LaserJet 4100 Series - User Guide - Page 223
Print Ps Errors, Ram Disk=auto, Ram Disk Size, Quick Copy, Jobs=32, Held Job, Timeout=off, Hours,
View all HP 4100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Configuration Menu (continued) Item Values PRINT PS ERRORS= OFF OFF ON RAM DISK=AUTO OFF ON AUTO QUICK COPY JOBS=32 HELD JOB TIMEOUT=OFF PERSONALITY= AUTO 1 to 50 OFF 1 HOUR 4 HOURS 1 DAY 1 WEEK AUTO PCL PS Explanation Select ON to print the PS error page when PS errors occur. Determine how the RAM disk is configured. This item appears only if there is no optional hard disk accessory installed and the printer has at least 16 MB of memory. OFF: The RAM disk is disabled. ON: The RAM disk is enabled. Configure the amount of memory to be used through the following item: RAM DISK SIZE. Note If the setting is changed from OFF to ON or from OFF to AUTO, the printer will automatically reinitialize when it becomes idle. Specifies the number of quick copy jobs that can be stored on the printer's hard disk accessory. Sets the amount of time that held jobs are kept before being automatically deleted from the queue. Select the default printer language (personality). Possible values are determined by which valid languages are installed in the printer. Normally you should not change the printer language (the default is AUTO). If you change it to a specific printer language, the printer will not automatically switch from one language to another unless specific software commands are sent to the printer. EN Configuration Menu 221