HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 107
Internet, Options, Mgmt. Protocols
UPC - 808736313971
View all HP 4200n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
1. Run a supported Web browser. 2. Enter the IP address of the print server as the URL. Figure 4.3 Entering the IP Address 3. If prompted with security alerts, click Yes to proceed. For full-featured wired print servers, the embedded Web server uses standard HTTP for initial access. However, they may be configured to appear as a secure site using an installed X.509-compliant certificate for identification. When properly configured, encrypted browser communications through HTTPS (secure HTTP) may be used for secure access. For full-featured wireless print servers, the embedded Web server will appear as a secure site for initial access. By default, encrypted browser communications through HTTPS is initially required. A factory-installed, self-signed certificate (X.509 compliant) is used for device identification. Although not recommended, you can use your Internet Options menu to configure your browser to ignore security warnings if the print server is configured to operate through HTTPS. See Mgmt. Protocols. Value-based, non-upgradeable HP Jetdirect print servers (for example HP Jetdirect 175x and 200m) do not support a secure embedded Web server. 4. An embedded Web server page will be displayed, either the Home page of the HP Jetdirect print server or a device page served by a Web server on the device. ENWW Using the Embedded Web Server 107