HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 125

AppleTalk The AppleTalk tab allows you to configure selected AppleTalk settings on the HP Jetdirect print server. See Table 4.6 for a description of items on this page. Note The AppleTalk parameters displayed include the AppleTalk printer types that are advertised on the network. The HP Jetdirect print server supports AppleTalk Phase 2 only. Table 4.6 Item AppleTalk Settings Description AppleTalk Enable Enable (check) or disable (clear) the AppleTalk protocol on the checkbox print server. If AppleTalk is enabled, AppleTalk parameters stored on the print server are displayed. Device (AppleTalk) Name Specify the name of the printer on the AppleTalk network. If you enter a name that is already assigned on your network, the AppleTalk name specified on the Jetdirect configuration page will be followed by a number to indicate that it is a duplicate. Print Type Identify the type of printer being advertised on the network. Up to two types can be displayed (for example, HP LaserJet and LaserWriter). Zone Select an available AppleTalk network zone for the printer. By default, the zone currently selected will be displayed. Click the Refresh selected zone Info button to refresh the list of available zones. DLC/LLC Using the checkbox provided, you can enable (check) or disable (clear) the DLC/LLC (Data Link Control/Logical Link Control) protocols on the HP Jetdirect print server. If the checkbox is clear, DLC/LLC protocols are disabled. ENWW Using the Embedded Web Server 125