HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 127

Table 4.7 SNMP Settings (2 of 2) Item Disable SNMPv1/v2 Enable SNMPv3 Description This option disables the SNMP v1/v2c agents on the print server, which is recommended for secure environments. If SNMP v1/v2c is disabled, some port monitors or discovery utilities may not operate properly. (Full-featured HP Jetdirect print servers only) This option enables (check) or disables (clear) the SNMP v3 agent on the print server. When enabled, an SNMP v3 account must be created on the print server, and the account information must be implemented on the SNMP v3 management application. You may create an account by providing the following information: User Name: the SNMP v3 account user name. Authentication Key: a 16-byte hexadecimal value for authenticating the SNMP packet contents using the MD5 algorithm. Privacy Key: a 16-byte hexadecimal value for encrypting the data portion of the SNMP packet using the DES algorithm. Context Name: the view context in which this user can access SNMP objects. It is always "Jetdirect". Other Settings This item provides access to a variety of management and printing configuration options. The following tabs are provided: G Misc. Settings: for enabling miscellaneous advanced protocols and functions G Firmware Upgrade: (for print servers that support firmware upgrades) to update your HP Jetdirect print server with new features and enhancements G LPD Queues: for setting up print queues used in printing under LPD (line printer daemon) printing services G USB Settings: (external print servers only) to configure Universal Serial Bus connection parameters G Support Info: to set up the Support link located under Other Links in the left margin G Refresh Rate: to set the time interval (in seconds) for embedded Web diagnostic page updates ENWW Using the Embedded Web Server 127