HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 133

Note If you are upgrading from a version prior to X.24.00 series, you must perform the upgrade again if supported non-English languages are desired. LPD Queues The LPD Queues page allows you to specify LPD (line printer daemon) print queues on the Jetdirect print server. For more information on LPD printing and print queues, see Chapter 5, "Configuring for LPD Printing". LPD printing must be enabled on the print server before you can set LPD queues. If LPD is disabled, go to the Misc. Settings tab to enable it. If LPD printing is enabled, ten different named print queues are available. Four of these queues are configured automatically and their parameters cannot be changed. The remaining six queues can be defined by the user. The six user-defined queues can be set up with character strings -such as job control commands -- that are automatically added before or after the print job. You can define up to eight named strings, and you can set up each queue so that any of these named strings precedes the print data ("prepend string name") or follows the print data ("append string name"). LPD Queue Parameters for setting up LPD queues are described below. See Table 4.9. ENWW Using the Embedded Web Server 133