HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 141

Table 4.11 Wizard Security Levels (1 of 2) Security Level Basic Security Enhanced Security (Recommended) Description This option requires that you configure an administrator password for configuration management. The administrator password is shared with other management tools, such as Telnet and SNMP applications. However, some management tools, such as Telnet, use plain-text communications and are not secure. The Administrator Account page is used to enter the administrator password. The Administrator Password will also be used as the SNMP v1/v2 Set Community Name for SNMP management applications. The Configuration Review page displays all the current settings that may affect security. Click Finish to set your basic security selections. This option adds to Basic Security by automatically disabling management protocols that are do not use secure, encrypted communications (such as Telnet and FTP firmware updates, RCFG, SNMP v1/v2c). To change individual protocol settings, see Mgmt. Protocols. The Administrator Account page is used to enter the administrator password. SNMP Configuration pages are used to configure specific SNMP settings: G Enable SNMPv3: (Full-featured print servers only) Enable SNMP v3 and create an SNMP v3 account. Creating an SNMP v3 account is not recommended if you manage devices using HP Web Jetadmin. See SNMP. G Enable SNMPv1/v2 read-only access: Enable this option to allow support of current tools that rely on SNMP v1/v2 for device discovery and status. The Configuration Review page displays all the current settings that may affect security. Click Finish to set your basic security selections. ENWW Using the Embedded Web Server 141