HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 142

Table 4.11 Wizard Security Levels (2 of 2) Security Level Custom Security Description This option proceeds through all available security settings supported by your print server. For more information on specific parameters and selections, see the tabs on the Mgmt. Protocols and Authorization menu pages under SECURITY. The Administrator Account page is used to enter the administrator password. The Web Mgmt. page (for full-featured print servers only) is used for HTTPS (secure HTTP) configuration, including certificates and encryption levels. The Management Tools page allows configuration of management protocols that are not secure (such as RCFG, Telnet and FTP firmware updates). SNMP Configuration pages are used to configure specific SNMP settings: G Enable SNMPv1/v2: Enable this option to allow management software that use SNMP v1/v2. If selected the SNMPv1/v2 Configuration page is displayed to configure SNMP community names. G Enable SNMPv3: (Full-featured print servers only) Enable this option to create an SNMP v3 account. Creating an SNMP v3 account is not recommended if you manage devices using HP Web Jetadmin. See SNMP. The Authorization page is used to set up an Access Control List, if desired to control host access to the device. The Print Protocols and Services page is used to enable or disable network printing, print services, and device discovery protocols that may affect security. The Configuration Review page displays all the current settings that may affect security. Click Finish to set your basic security selections. ENWW Using the Embedded Web Server 142