HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 222

Table 9.6 TCP/IP Configuration Information (3 of 4) Message TFTP SERVER: CONFIG FILE: DOMAIN NAME: DNS SERVER: WINS SERVER: SYSLOG SERVER: IDLE TIMEOUT: SLP: Description The IP address of the system where the TFTP configuration file is located. During initialization, the temporary address 0.0.0.0 is displayed. NOT SPECIFIED: Indicates that a TFTP server has not been not been set. The name of the HP Jetdirect configuration file. The file pathname may be truncated to fit on two lines. NOT SPECIFIED: Indicates that a file was not specified in the BOOTP reply from the host. The Domain Name System (DNS) name of the domain in which the HP Jetdirect print server resides (for example, support.company.com). It is not the fully qualified DNS name (for example, printer1.support.company.com) because the host printer name is not included. NOT SPECIFIED: Indicates that a domain name has not been configured on the print server. The IP address of the Domain Name System (DNS) server. NOT SPECIFIED: Indicates that a DNS server's IP address has not been configured on the print server. The IP address of the Windows Internet Name Service (WINS) server. NOT SPECIFIED: Indicates that a WINS server's IP address has not been configured on the print server. The IP address of the syslog server configured on the print server. NOT SPECIFIED: Indicates that a syslog server has not been configured. The timeout value expressed in seconds after which the print server closes an idle TCP print data connection. Acceptable values are integers between 0 and 3600. A value of zero turns off the timeout mechanism. The default value is 270 seconds. Specifies whether the HP Jetdirect print server sends Service Location Protocol (SLP) packets used by system applications for automated installation. ENABLED: The print server sends SLP packets. DISABLED: The print server does not send SLP packets. ENWW HP Jetdirect Configuration Page 222