HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 268

Using Your Web Browser (Windows and Mac OS). To use your Web browser to configure the Jetdirect wireless print server with a wireless connection to your network, your system must be set up for operation on a TCP/IP network. Web browser wireless connection instructions are provided for the following systems: Microsoft Windows, and Apple Macintosh (see page 270). G Microsoft Windows. To use your Web browser on a Windows system, follow these steps: 1. Verify that your computer's wireless network settings match the factory-default settings on the HP Jetdirect print server. 2. Open a DOS Command Prompt window. 3. At the command prompt, enter ipconfig. The ipconfig command will display the computer's IP address. Record this address. 4. Use a "route add" command to establish an IP path (or route) from your wireless computer to the print server. (This means that there must be a match between the network identification of your system to that of the HP Jetdirect print server. If the print server is configured with its default IP address, for example 169.254/16 or 192.0.0.192, a route may not exist.) Note A typical route add command is entered as follows: route add where is the IP address on the HP Jetdirect print server, and is the IP address set on the computer's network card. Example: route add 192.0.0.192 192.170.1.2 ENWW HP Jetdirect 802.11b Wireless Print Servers 268