HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 284

Table C.2 HP Jetdirect Graphical Control Panel Menu (2 of 7) Menu Item Options AUTHENTICATION CONFIGURE EAP Description of settings Choose one of the following authentication methods for your network: OPEN SYSTEM: Network authentication is not required or used. SHARED KEY: Requires a WEP encryption key on each device on your wireless network. Use the CONFIGURE KEYS menu to configure WEP encryption keys. EAP/802.1x: Requires configuration of Extensible Authentication Protocols in combination with an authentication server used on your network. Use the CONFIGURE EAP menu to configure EAP protocols. EAP/802.1x configuration options may require a password, which may be set using the Security menu. EAP/PSK: Requires configuration of a Pre-Shared Key when Extensible Authentication Protocols are used without an authentication server on the network. Use the CONFIGURE PSK menu to generate a Pre-Shared Key. This menu is available if EAP Authentication has been selected. The following authentication protocols can be enabled: I LEAP I PEAP I EAP-MD5 I EAP-TLS I EAP-TTLS You may enable multiple protocols simultaneously if required by your network. However, each protocol enabled may require additional configuration. For each authentication protocol, the following options are available: OFF (default): Disabled ON: Enabled For PEAP, EAP-TLS, EAP-TTLS, "CERT. REQUIRED" may appear, indicating that digital certificate information must be preinstalled on the print server. ENWW The HP Jetdirect Control Panel Menu 284