HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 286

Table C.2 HP Jetdirect Graphical Control Panel Menu (4 of 7) Menu Item Options ENCRYPTION CONFIGURE KEYS RESET 802.11b Description of settings This menu is displayed if you selected Open System, Shared Key, or EAP-MD5 authentication. Choose your static WEP key encryption level: 128-BIT WEP: Selects 104/128-bit WEP. 64-BIT WEP: Selects 40/64-bit WEP. NONE: (default) indicates that encryption is not configured. WEP encryption keys are configured using the CONFIGURE KEYS menu. This menu appears only if 128-bit WEP or 64-bit WEP are selected. Use this menu to assign the transmit key position and WEP key values. Four key positions (key 1, 2, 3, or 4) are available, but the selected key must contain a valid WEP key value. If a valid WEP key is not assigned, the first key found with a valid key will be assigned. TRANSMIT KEY: Select the active transmit key position (key 1, 2, 3, 4). ENTRY METHOD: Select the format for entering WEP key values. I HEX: Enter values using hexadecimal numbers (0 - 9, a - f, or A - F). I ALPHANUMERIC: Enter values using the allowed alphanumeric ASCII characters (0 - 9, a - z, A - Z). KEY 1 through KEY 4: Enter a valid WEP key value for each key position. I For hexadecimal entries, you must enter 10 digits (for 40/64-bit encryption) or 26 digits (for 104/128-bit encryption). Hex digits are not case-sensitive. I For alphanumeric entries, enter 5 characters (for 40/64-bit encryption) or 13 characters (for 104/128-bit encryption). Alphanumeric entries are case-sensitive. YES: Choose to reset the 802.11b wireless parameters on the print server to factory-default values. Parameter values for other network protocols are not reset. To view reset values, you must exit and re-enter the control panel menu. NO (default): 802.11b wireless parameters are not reset. ENWW The HP Jetdirect Control Panel Menu 286