HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 49

Table 3.1 Item Tags Supported in a BOOTP/DHCP Boot file (3 of 4) RFC 2132 Option Description tv 59 DHCP T2 timeout, specifying the DHCP lease rebind time (seconds). T69 69 The IP address (in hexadecimal) of the preferred outgoing e-mail SMTP (Simple Mail Transport Protocol) server, for use with supported Scan devices. T144 -- An HP-proprietary tag that specifies the relative path name of the TFTP configuration file. Long path names may be truncated. The path name must be in double quotes (for example, "pathname"). For file format information, refer to "TFTP Configuration File Entries". Note: Standard BOOTP option 18 (extensions file path) also allows a standard tag (ef) to specify the relative path name of the TFTP configuration file. T145 -- Idle Timeout option. An HP-proprietary tag to set the idle timeout (seconds), which is the amount of time that a print data connection may remain idle before being closed. The range is 1 - 3600 seconds. T146 -- Buffer Packing option. An HP-proprietary tag to set buffer packing for TCP/IP packets. 0 (default): Normal data buffers are packed before sending to the printer. 1: Disable buffer packing. Data is sent to the printer when received. T147 -- Write Mode option. An HP-proprietary tag that controls the TCP PSH flag setting for device-to-client data transfers. 0 (default): disables this option, flag not set. 1: all-push option. The push bit is set in all data packets. 2: eoi-push option. The push bit is set only for data packets that have an End-of-Information flag set. T148 -- IP Gateway Disable option. An HP-proprietary tag to prevent configuration of a Gateway IP address. 0 (default): allows an IP address. 1: prevents a Gateway IP address to be configured. ENWW TCP/IP Configuration 49