HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 52
Table 3.2, List of Supported TFTP Parameters
UPC - 808736313971
View all HP 4200n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Table 3.2 lists the supported TFTP parameters (HP Jetdirect firmware version x.25.00 or later). Table 3.3 describes the TFTP parameters. Table 3.2 List of Supported TFTP Parameters (1 of 2) General G passwd: G ssl-state: G sys-location: G tftp-parameter-attribute: G sys-contact: TCP/IP Main G host-name: G pri-wins-svr: G domain-name: G sec-wins-svr: G dns-svr: G smtp-svr: TCP/IP Print Options G 9100-printing: G interlock: G ftp-printing: G buffer-packing: G ipp-printing: G write-mode: G lpd-printing: G mult-tcp-conn: G banner: TCP/IP Raw Print Ports G raw-port: TCP/IP Access Control G allow: netnum [mask] TCP/IP Other Settings G syslog-config: G ipv4-multicast: G syslog-svr: G idle-timeout: G syslog-max: G user-timeout: G syslog-priority: G ews-config: G syslog-facility: G tcp-mss: G slp-config: G tcp-msl: G ttl-slp: G telnet-config: G mdns-config: G default-ip: G mdns-service-name: G default-ip-dhcp: G mdns-pri-svc: G web-refresh: ENWW TCP/IP Configuration 52