HP 4200n HP Jetdirect Print Servers - Administrator Guide - Page 95

Table 3.4 Telnet Commands and Parameters (15 of 18) ipx-toner-low Enables or disables IPX toner-low notification through PJL. 0 disables, 1 (default) enables. source-route (Token Ring only) Configures the HP Jetdirect print server with the IPX/SPX source routing used on the network. auto (default): Source routing is automatically sensed from the network. off: Packets are transmitted without source routing. The print server will only respond to stations on the same ring. single r: All packets are sent with source routing. The Single Route method is used for broadcasts and when the route is unknown. all rt: All packets are sent with source routing. The All Routes method is used for broadcasts and when the route is unknown. AppleTalk Settings Command Description appletalk Enables or disables AppleTalk (EtherTalk) protocol operation on the print server. 0 disables, 1 (default) enables. For example, at-config 0 will disable AppleTalk operation name-override (External print servers only) Specifies the name of the AppleTalk network. Up to 32 characters may be used. Name (Read-only parameter) The name of the printer on the AppleTalk network. A number after the name indicates that there are multiple devices with this name, and this is the Nth instance of the name. Print Type (Read-only parameter) Specifies the AppleTalk network printer type reported by the Jetdirect print server. Up to three print types may be reported. Zone (Read-only parameter) The name of the AppleTalk network zone on which the printer is located. Phase (Read-only parameter) AppleTalk phase 2 (P2) is preconfigured on the HP Jetdirect print server. Status (Read-only parameter) Indicates the current AppleTalk configuration status. READY: Indicates the HP Jetdirect print server is awaiting data. DISABLED: Indicates that AppleTalk was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. ENWW TCP/IP Configuration 95