HP 4300n HP Jetdirect Print Servers - Administrator Guide
HP 4300n - LaserJet B/W Laser Printer Manual
 |
UPC - 808736314381
View all HP 4300n manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 4300n manual content summary:
- HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 1
hp jetdirect 175x 310x 380x en3700 200m 250m 280m 610n 615n 620n 680n administrator's guide - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 2
Administrator's Guide HP Jetdirect Print Servers Models: 175x 310x 380x en3700 200m 250m 280m 610n 615n 620n 680n - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 3
Hewlett-Packard Company All rights reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained in this document is subject to change without notice. The only warranties for HP products - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 4
Printer Wizard (Windows 21 HP Jetdirect Printer Installer for UNIX 22 HP Web Jetadmin 23 Internet Printer Connection Software 26 HP IP/IPX Printer Gateway for NDPS 29 HP WPS Assistant (Mac OS X 31 HP LaserJet Utilities for Mac OS 32 3. TCP/IP Configuration Introduction 38 Default IP Address - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 5
on Windows NT/2000 Systems 165 LPD on Windows XP Troubleshooting an LPD UNIX Configuration 205 9. HP Jetdirect Configuration Page Introduction 207 Configuration Page Format 208 Configuration Page Messages 210 Error Messages 232 A. TCP/IP Overview Introduction 243 IP Address 244 Configuring IP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 6
B. HP Jetdirect 802.11b Wireless Print Servers Introduction 252 Basic HP Jetdirect Wireless Concepts 253 Installation Overview 263 C. The HP Jetdirect Control Panel Menu Introduction 276 Classic Control Panel 277 Graphical Control Panel 283 D. OpenSSL Statements Index ENWW vi - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 7
to the network by adapting the printer's USB port to the network. Note Unless otherwise specified, the term print server in this manual refers to the HP Jetdirect print servers and not a separate computer running print server software. When connected through a wireless connection to your network - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 8
The features described in this guide support the following HP Jetdirect print servers with firmware versions specified: Table 1.1 Supported Products Model Product Printer Network Network Firmware Number Connect Connect Protocol Support Version 175x J6035C USB 1.1 10/100TX Limited* M.25.xx - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 9
* Product Support TCP/IP Microsoft Windows 98/Me/NT4.0/2000/XP (32- and 64-bit), Direct Mode Novell NetWare 5, 6 using NDPS UNIX and Linux, including: Hewlett-Packard HP-UX, Sun Microsystems Solaris (SPARCsystems only), IBM AIX**, HP MPE-iX**, RedHat Linux, SuSE Linux LPR/LPD (Line Printer Daemon - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 10
** For these network systems, contact your network system vendor for software, documentation, and support. *** Windows IP/IPX Direct Mode printing and LPD/Windows supported. NetWare is not supported. IPP is not supported. LPD/UNIX is not supported. ENWW Introducing the HP Jetdirect Print Server 10 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 11
If not supplied with this product, HP network setup and management software for supported systems may be obtained from HP support at: http://www.hp.com/support/net_printing For software to set up network printing on other systems, contact your system vendor. Security Protocols SNMP (IP and IPX) SNMP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 12
Print Servers) Server-Based Authentication HP Jetdirect 802.11b wireless print servers support popular authentication server-based methods (EAP using Message Digest Algorithm 5, RFC 1321). EAP-MD5 is a one-way authentication protocol that authenticates the client using a password protected by the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 13
(WPA) Note If not supported by your HP Jetdirect wireless print server, EAP/PSK authentication and Robust encryption will not be displayed as a selectable configuration option. When dynamic encryption is used, encryption keys are periodically changed automatically and provide enhanced security - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 14
.hp.com/support/net_printing is a great place to start for answers to questions about your HP Jetdirect print server - 24 hours a day, 7 days a week. Firmware Upgrades Hewlett-Packard offers downloadable firmware upgrades for HP Jetdirect print servers that contain upgradeable memory (HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 15
Firmware upgrades for supported HP Jetdirect print servers may be installed over a network using one of the following firmware installation tools: G HP Jetdirect Download Manager (Windows). HP Jetdirect Download Manager can be downloaded from HP online support at: http://www.hp.com/go/dlm_sw G HP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 16
most recent HP support telephone numbers and available services worldwide, visit: http://www.hp.com/support/support_assistance Note For toll-free support in the HP Jetdirect print server, use the following HP Web page: http://www.hp.com/go/jetdirect_register ENWW Introducing the HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 17
you to set IP address parameters G Installable version that runs from your hard disk is available HP Install Network Printer Wizard (Windows) Windows 98, Me, NT 4.0, 2000, XP* (Direct Mode IP and IPX), Server 2003 NetWare 4.x, 5.x, 6.0 (IPX/SPX only) *IPX/SPX not supported on Windows XP 64-bit - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 18
only) TCP/IP Fast and easy installation of HP Jetdirect-connected printers. G Supplied on the HP Jetdirect CD-ROM, and may be downloaded from HP's Website HP Web Jetadmin (See the HP Website for supported system updates.) Windows NT 4.0, 2000, XP Professional, Server 2003 HP-UX* Solaris - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 19
Software Solutions (3 of 3) Operating Environment Function Remarks HP IP/IPX Printer Gateway for NDPS NetWare 5.x, 6.0 (IPX only) Simplified installation, printing, and bidirectional management of HP Jetdirect-connected printers under Novell Distributed Print Services (NDPS). G Frees up user - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 20
IP address on the print server, as required (for example, to accommodate special DHCP requirements or Access List restrictions). Requirements G Wireless computer, typically a laptop PC G Microsoft Windows XP (32-bit only), Windows 2000, Windows NT 4.0, Windows 98, Windows Me ENWW HP Software - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 21
N TCP/IP or IPX/SPX network protocol G Novell NetWare 4.x, 5.x, 6.0 N Novell Client software for Microsoft Windows 98/NT 4.0/2000/XP N Queue Server Mode N IPX/SPX network protocol G The correct printer driver G Printer connection to the network through an HP Jetdirect print server ENWW HP Software - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 22
HP Jetdirect Printer Installer for UNIX The HP Jetdirect Printer Installer for UNIX contains support for HP-UX and Solaris systems. The software installs, configures and provides diagnostics capabilities for HP printers connected to TCP/IP networks using full-featured HP Jetdirect print servers. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 23
HP Jetdirect print servers and HP printers to provide enhanced management features. To use HP Web Jetadmin, see the online help and documentation supplied with the software. System Requirements HP Web Jetadmin software runs on Microsoft Windows NT 4.0, Windows 2000, Windows XP Professional, Windows - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 24
on the local system: 1. Download the installation files from HP online support at http://www.hp.com/go/webjetadmin. 2. Follow the instructions on the screen to install the HP Web Jetadmin software. Note Installation instructions are also contained in the HP Web Jetadmin install file. Verifying - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 25
example: http://systemname.domain:port/ Follow the instructions on the appropriate home page to configure or modify your printer. Note You can also substitute the systemname.domain with the TCP/IP address. Removing HP Web Jetadmin Software To remove HP Web Jetadmin software from your Web server - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 26
-Supplied Software HP Internet Printer Connection software allows you to set up Internet printing from Windows NT 4.0 and Windows 2000 clients. 1. To obtain the software: Download the HP Internet Printer Connection software from HP online support at: http://www.hp.com/support/net_printing ENWW HP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 27
instructions provided with the software. Contact your network administrator to get the IP address or URL of the printer to complete the setup. HP Software System Requirements G Computer running Microsoft Windows NT 4.0 (Intel-based) or Windows 2000 G IPP-enabled HP Jetdirect print server (firmware - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 28
not required.) An IPP connection to HP Jetdirect external print server with IP address 192.160.45.39 and the printer on port 2 Then click Next. 5. You will be prompted for a printer driver (the HP Jetdirect print server does not contain printer drivers, so your system cannot automatically obtain - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 29
of printers using IP/IPX G Tight integration with Novell's NDS and NWAdmin G Status updates from printers G Simplified Automatic Driver Download G Reduced SAP Traffic G Reduced number of required NetWare User Licenses G Native TCP/IP printing with NetWare 5.x, 6.0 ENWW HP Software Solutions - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 30
to obtain the related documentation: I Visit http://www.hp.com/go/hpgate_sw I Select and follow the instructions for downloading drivers and software. System requirements and Novell Client support are included in the documentation supplied with the software. ENWW HP Software Solutions Summary 30 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 31
network. To use this utility, the HP Jetdirect wireless print server must be in a open the HP WPS Assistant folder. 5. Run the HP WPS Assistant utility, then follow the instructions on the HP LaserJet Utility for Mac OS) to configure and manage your printer for printing. ENWW HP Software Solutions Summary - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 32
your HP printer. Installing the Printer Software If the HP LaserJet Utility was included on your printer's CD-ROM, see your printer documentation for installation instructions, then skip to the next section to configure the printer. If you are installing the HP LaserJet Utility from the HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 33
the Printer The HP LaserJet Utility allows printer settings such as printer name and preferred zone to be configured from your Mac OS system. Hewlett-Packard recommends that only network administrators use the printer configuration capabilities of this utility. If this printer is to be serviced by - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 34
factory supplies a default name for your printer. Hewlett-Packard highly recommends that you rename your printer to avoid having multiple printers with similar names on your network. CAUTION After you have renamed the printer and have set up print queues to that printer, use caution when changing - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 35
, which is set by the router, this utility lets you select the zone on which your printer appears. The zones on which your printer can reside are limited by your network configuration. The HP LaserJet Utility only enables you to select a zone that is already configured for your network. Zones are - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 36
printer is located. 5. Select the printer name you want to use from the list of printer names in the upper-right area of the Chooser. If the printer Printer Description file (PPD) for the printer job to the printer, status messages printer is printing your job. 8. Exit the Chooser. To display your user - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 37
Select Print Window from the File menu, or if no window is open, select Print Desktop. The Print dialog box appears. 2. Click Print. If the printer prints the job, you have connected your printer to your network correctly. If your printer does not print, see Chapter 8. ENWW HP Software Solutions - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 38
server may also be configured manually. Manual-based tools include Telnet, a Web browser, the printer control panel, arp and ping commands (when the default IP address is 192.0.0.192), or SNMP-based management software. TCP/IP configuration values assigned manually will be retained when powered - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 39
shipped from the factory or after a cold-reset), the HP Jetdirect print server has no IP address. A default IP address may or may not be assigned depending on the network environment. Default IP Address Will Not Be Assigned A default IP address will not be assigned if a server-based method (such - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 40
to use when the print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration (for example, when manually configured to use BOOTP or DHCP). The Default IP parameter can be changed through a supported configuration tool, such as Telnet, a Web browser, and SNMP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 41
through supported configuration tools such as Telnet, a Web browser, and SNMP management applications. HP Jetdirect Wireless Print Server. When initially powered on, a factory-default wireless print server that has no connection to a network will likely self-assign a link-local IP address. If - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 42
software on supported systems. For more information see Chapter 2, "HP Software Solutions Summary". To configure a wireless print server with a valid IP address before a wireless connection is established, use the HP Jetdirect Wireless Setup Wizard (Windows) or the embedded Web server. Printer - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 43
, see Chapter 4. G Printer Control Panel. (Internal Jetdirect print servers only) You can manually enter the configuration data using the printer control panel keys. The control panel method allows you to configure only a limited subset of configuration parameters (IP address, subnet mask, default - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 44
DHCP services (see Using DHCP). However, Windows NT/2000 systems may require third-party software for TFTP support. For setup of NetWare BOOTP servers, refer to your NetWare documentation. Note If the Jetdirect print server and BOOTP/DHCP server are located on different subnets, IP configuration - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 45
same when powered off/on. In DHCP, IP configuration parameters are leased and may change over time. When in its factory-default state and powered on, the HP Jetdirect print server will attempt to automatically configure itself using several dynamic methods, one of which is BOOTP. BOOTP/TFTP on UNIX - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 46
If the HP Jetdirect print server finds such a file, it will use TFTP to download the file and HP recommends that the BOOTP server be located on the same subnet as the printers it serves. BOOTP broadcast packets may not be forwarded by routers unless the routers are properly configured. ENWW TCP/IP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 47
HP Jetdirect print server (firmware version x.24.00 or later) are listed in Table 3.1. Table 3.1 Item Tags Supported in a BOOTP/DHCP Boot file (1 of 4) RFC 2132 Option Description nodename -- The name of the peripheral. This name identifies an entry point to a list of parameters for a specific - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 48
Domain Name (such as printer1.support.hp.com). ef 18 Extensions file tag that specifies the relative path name of the TFTP configuration file. Note: This tag is similar to the vendor-specific tag T144, described below. na 44 Tag for IP addresses of the NetBIOS-over-TCP/IP Name Server (NBNS - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 49
2132 Option Description tv 59 DHCP T2 timeout, specifying the DHCP lease rebind time (seconds). T69 69 The IP address (in hexadecimal) of the preferred outgoing e-mail SMTP (Simple Mail Transport Protocol) server, for use with supported Scan devices. T144 -- An HP-proprietary tag that - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 50
or 3. : Option value 0 (default) disables interlock, 1 enables. Example: 2 1 specifies , T150 -- TFTP server's IP address option. An HP-proprietary tag to specify the TFTP server's IP address where the TFTP configuration file is located. T151 -- Network - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 51
Example of an HP Jetdirect TFTP Configuration File # # Allow only Subnet 192.168.10 access to peripheral. # Up to 10 'allow' entries can be written through TFTP. # Up to 10 'allow' entries can be written through Telnet # or embedded Web server. # 'allow' may include single IP addresses. # allow: 192 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 52
lists the supported TFTP parameters (HP Jetdirect firmware version x.25.00 or later). Table 3.3 describes the TFTP parameters. Table 3.2 List of Supported TFTP Parameters (1 of 2) General G passwd: G ssl-state: G sys-location: G tftp-parameter-attribute: G sys-contact: TCP/IP Main G host - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 53
: G name-override: DLC/LLC G dlc/llc: Other Settings G link-type: G MFP-config: G webscan-config: G usb-mode: G scan-idle-timeout: G status-page-lang: G scan-email-config: Support G support-name: G support-url: G support-number: G tech-support-url: ENWW TCP/IP Configuration 53 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 54
overwrite manually configured parameters. TCP/IP Main host-name: Specifies the node name that will appear on the Jetdirect configuration page. Default is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware address. domain-name: The domain name for the device (for example, support.hp - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 55
-svr: The IP address of the secondary Windows Internet Name Service (WINS) server. smtp-svr: The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for use with supported Scan devices. TCP/IP Print Options 9100-printing: Enables or disables printing to TCP port 9100 on - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 56
host access list stored on the HP Jetdirect print server. Each entry specifies a host or network of hosts that are allowed to connect to the printer. The format is "allow: netnum [mask]" where netnum is a network number or host IP address, and mask is an address mask of bits applied to the network - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 57
as the IP address) changes from session to session. Apple Rendezvous will display this service. The default service name is the printer model and the LAN Hardware (MAC) address. mdns-pri-svc: Specifies the mDNS highest priority service to use for printing.To set this parameter, choose one of the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 58
data connection is allowed to remain open. Since the card supports only a single TCP connection, the idle timeout balances the opportunity of a host to recover or complete a print job against the ability of other hosts to access the printer. The acceptable values range from 0 to 3600 (1 hour). If - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 59
firmware upgrades through current HP downloading utilities will be disabled. get-cmnty-name: Specifies a password that determines which SNMP GetRequests the HP Jetdirect print server will respond to. This is optional. If a user name check failed. The default is "on." ENWW TCP/IP Configuration 59 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 60
of 10) trap-dest: Enters a host's IP address into the HP Jetdirect print server's SNMP trap destination list. The command format is: trap-dest: ip-address [community name] [port number] The default community name is "public"; the default SNMP port number is "162". The port number cannot be specified - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 61
(default) enables. ipx-toner-low: Enables or disables IPX toner-low notification. 0 disables Mbps) and communication mode (Full- or Half-Duplex). Selections are AUTO, 100FULL, 100HALF, 10FULL, 10HALF feature on the print server when connected to a supported device. 0 disables, 1 (default) enables. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 62
with your multifunction or all-in-one peripheral. 0 (default): disables client software support (allows printing only). 1: enables client software support (allows printing and scanning). usb-mode: Specifies the communication mode over the USB port on the HP Jetdirect print server. G Auto (default - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 63
support-number: Typically used to specify a phone number or extension to call for support of this device. support-url: A Web URL for product information on this device over the Internet or an intranet. tech-support-url: A Web URL for technical support over the Internet or an intranet. ENWW TCP/IP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 64
DHCP server on your network, the HP Jetdirect print server automatically obtains its IP address from that server and registers its name with any RFC 1001 and 1002-compliant dynamic name services as long as a WINS (Windows Internet Naming Service) server IP address has been specified. A TFTP (Trivial - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 65
information or for additional support, see the information supplied with your DHCP server software. Note To avoid problems resulting from IP addresses that change, HP recommends that all printers be assigned IP addresses with infinite leases or reserved IP addresses. ENWW TCP/IP Configuration 65 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 66
within a scope. 7. In the Lease Duration section, select Unlimited, then select OK. HP recommends that all printers be assigned infinite leases to avoid problems resulting from IP addresses that change. Be aware, however, that selecting an unlimited lease duration for the scope causes all clients - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 67
, perform the following steps in the Add Reserved Clients window to set up a reservation for that printer: a. Type the selected IP address. b. Obtain the MAC address or hardware address from the configuration page, and type this address in the Unique Identifier box. c. Type the client name (any - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 68
, select OK. This returns you to the DHCP Options window. If the address you have just added appears in the list of IP addresses (near the bottom of the window) return to step 10d. Otherwise, repeat step 10c. d. In the DHCP Options window, select WINS/NBT Node Type (046) from the Unused Options - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 69
c. Enter the appropriate information in each field, including the reserved IP address for your printer. (Note: the MAC address for your HP Jetdirect-connected printer is available on the HP Jetdirect configuration page.) d. Under "Supported types", select DHCP only, then click Add. (Note: Selecting - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 70
network clients, including the HP Jetdirect print server. To set up DHCP services on a NetWare server, refer to Novell documentation and support. To Discontinue DHCP Configuration CAUTION Changes to an IP address on your HP Jetdirect print server may require updates to printer or system printing - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 71
information from a DHCP server. This means that when you choose DHCP and complete your configuration session (using Telnet, for example), the TCP/IP protocol for the print server is re-initialized and all current configuration information is deleted. The print server then attempts to acquire new - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 72
a RARP request from the HP Jetdirect print server and to supply the IP address to the print server. 1. Turn the printer off. 2. Log onto your for instructions on starting the RARP daemon. 6. Edit the /etc/hosts file to add your designated IP address and node name for the HP Jetdirect print server - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 73
the HP Jetdirect print server. For example: 00:01:E6:a8:b0:00 laserjet1 Note If your system uses Network Information Service (NIS), you need to incorporate changes to the NIS host and ethers databases. 8. Turn the printer on. 9. To verify that the card is configured with the correct IP address - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 74
print server. Using the arp and ping commands with HP Jetdirect print servers requires the following: G Windows NT/2000/XP or UNIX system configured for TCP/IP operation G HP Jetdirect firmware version x.20.00 or later G A legacy default IP address 192.0.0.192 has been set on the print server - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 75
LAN hardware address may require a specific format. For example: G For Windows NT 4.0, 2000, XP arp -s 192.168.45.39 00-01-E6-a2-31-98 ping 192.168.45.39 G For UNIX arp -s 192.168.45.39 00:01:E6:a2:31:98 ping 192.168.45.39 Note Once the IP address has been - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 76
, embedded Web server, or HP Web Jetadmin software). Creating a Telnet Connection To use Telnet commands with the HP Jetdirect print server, a route must be available from your workstation to the print server. If the print server and your computer must have a similar IP address, that is, the network - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 77
prompt, enter the following command: route add where is the IP address configured on the HP Jetdirect print server, and is the IP address of the workstation's network card that is attached to the same physical LAN - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 78
A Typical Telnet Session Initiating a typical Telnet session is illustrated below. ENWW TCP/IP Configuration 78 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 79
page. See Chapter 9. 2. A connection to the HP Jetdirect print server will be displayed. If the server responds with "connected to IP address", press Enter twice to make sure that the Telnet connection is initialized. 3. If prompted for a user name and password, enter the correct values. By default - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 80
by a carriage return. See Table 3.4 for configuration parameters (firmware version x.25.00 or later). 2. Repeat the previous step to or quit (depending on your system). When prompted whether to save settings that you have changed, enter Y (default) for Yes, or N for No. If you enter save instead - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 81
. Note If a parameter is supplied dynamically (for example, from a BOOTP or DHCP server), its value cannot be changed using Telnet without first setting Manual configuration. To set Manual configuration, see the ip-config command. Whenever you are manually changing an IP address, you should also - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 82
communications: 1 (default): Forced redirection to the HTTPS port. Only HTTPS (secure HTTP) communications can be used. without using an Access Point. desired-ssid Specify the desired Service Set Identifier (SSID), or Network Name, for the print are not case-sensitive. ENWW TCP/IP Configuration 82 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 83
for network access. The use of the Shared_Key option is not valid with the wpa-auth-type command settings (802.1x or PSK). ENWW TCP/IP Configuration 83 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 84
of supported authentication user name and password be configured on the device. Use the svr-auth-user and svr-auth-pass commands to specify a user user name -user command to specify a user user user and svr-auth-pass commands to specify a user a user name user and svr-auth-pass commands to specify a user - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 85
the Shared Key authentication option in the auth-type command. Use this command to specify a supported EAP authentication type: 802.1x: Select this option on an EAP network that uses an of the authentication server and also must be supported by the Access Point. ENWW TCP/IP Configuration 85 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 86
be User Specified. bootp: The print server will send BOOTP requests on the network for dynamic IP configuration. dhcp: The print server will send DHCP requests on the network for dynamic IP configuration. ip IP address for the print server, in dotted notation. For example: ip-config manual ip - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 87
address, you should manually change the print server's IP address. This will release the DHCP-assigned address back to the DHCP IP address pool. Config Server (Read-only parameter) The IP address of the server (such as a BOOTP or DHCP server) that last configured the IP address on the HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 88
printer is allowed to close a Port 9100 print connection. To accommodate multiport print servers, a Port Number and Option value are specified. Port that have an End-of-Information flag set. TCP/IP LPD Queues Command Description addq Adds a user-defined queue. The queue name (up to 32 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 89
printer. The format is "allow netnum [mask]" where netnum is a network number or host IP address, and mask is an address mask of bits applied to the network number and host address port 514) syslog-svr The syslog server's IP address in dotted notation. It specifies the server that the HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 90
SLP is used by selected HP software applications (through UDP port 427) to automate device discovery. mdns-config Enables or disables Multicast Domain Name System (mDNS) services. 0 disables, 1 (default) enables. mDNS is typically used on small networks for IP address and name resolution (through - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 91
user-specified LPD queues 5 through 10. The default selection will depend on the printer, typically port 9100 printing or LPD binps. ttl-slp Specifies the IP multicast "Time To Live" (TTL) setting for Service before any changes can be made. cold-reset Sets TCP/IP factory default settings - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 92
assigned. 0: Disables DHCP requests. 1 (default): Enables DHCP requests. TCP/IP Diagnostics Command Description Last Config IP (Read-only parameter) The IP address of the system from which the HP Jetdirect print server's IP address was configured. TCP Conns Refused (Read-only parameter) The - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 93
HP Web Jetadmin. In addition, firmware upgrades through current HP downloading utilities will be disabled. get-cmnty-name Specifies a password that determines which SNMP GetRequests the HP Jetdirect print server will respond to. This is optional. If a user ) is on. ENWW TCP/IP Configuration 93 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 94
IP address into the HP Jetdirect print server's SNMP trap destination list. The command format is: trap-dest: ip-address [community name] [port number] The default community name is 'public'; the default SNMP port number is '162'. The port user-assigned HP Jetdirect print server waits between Service - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 95
name of the printer on the AppleTalk network HP Jetdirect print server is awaiting data. DISABLED: Indicates that AppleTalk was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. ENWW TCP/IP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 96
MFP config) Enable or disable print server support of the client software provided with your multifunction or all-in-one peripheral. 0 (default): disables client software support (allows printing only). 1: enables client software support (allows printing and scanning). ENWW TCP/IP Configuration 96 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 97
HP Jetdirect print server and the device. G Full Speed: 12 Mbits/sec as specified in the USB v2.0 specifications, compatible with USB v1.1 specifications. G Hi-Speed: 480 Mbits/sec for USB v2.0 devices only. G Disconnected: The USB port is not connected. status-page-lang Specifies the printer - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 98
over the Internet or an intranet. tech-support-url A Web URL address for technical support over the Internet or an intranet. Menu . Note Changes are not saved on the Jetdirect print server until you exit a menu and, when prompted, choose to save your changes. ENWW TCP/IP Configuration 98 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 99
TCP/IP - Raw Print Ports 4. TCP/IP - Access Control 5. TCP/IP - Other Settings 6. TCP/IP - Diagnostics 0. Return to Main Menu Enter Selection => 1 For parameters listed in TCP/IP Main Settings, select 1. TCP/IP - Main Settings Host Name : printer1 IP Config Method : USER SPECIFIED IP Address - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 100
/SPX or AppleTalk are not affected. To reset all parameters to factory default values, refer to Chapter 8. Using the Embedded Web Server You can set IP parameters on HP Jetdirect print servers that support the embedded Web server. For more information, refer to Chapter 4. ENWW TCP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 101
the control panel for your printer, refer to your printer documentation. When accessing the HP Jetdirect menu from the printer's control panel, you can set the following TCP/IP network configuration parameters: G IP host name G DHCP lease behavior (release or renew) G IP address of the print server - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 102
. You may change the IP address of the print server to one that can be used on the new network, or erase the current IP address and configure another address after you are installed on the new network. See Chapter 8, "Troubleshooting the HP Jetdirect Print Server," for instructions to reset the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 103
Web server provides access to configuration and management pages for the HP Jetdirect print server and the attached network device (such as a printer or multifunction, all-in-one device). Tabs across the upper portion of your browser window provide access to device and networking pages. The tabs and - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 104
HP Jetdirect Home Tab Figure 4.1 Typical HP Jetdirect Home Tab Networking Tab Menu items in left margin Figure 4.2 HP Jetdirect Networking Tab For network parameter descriptions, see "Networking Tab". ENWW Using the Embedded Web Server 104 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 105
can be used with Web browsers that support HTML 4.01 and cascading style sheets. Hewlett-Packard tests a number of current and older HP Jetdirect embedded Web server. Using HP Web Jetadmin 7.0, you can enable the SNMP v3 agent and seamlessly create an SNMP v3 account on the print server. A link to HP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 106
selected printers with internal print servers), Telnet, the "arp" and "ping" commands, HP Web Jetadmin or other management software. For more information on TCP/IP configuration options, see Chapter 3. When powered on, an HP Jetdirect print server that is unable to retrieve a valid IP address from - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 107
1. Run a supported Web browser. 2. Enter the IP address of the print server as the URL. Figure 4.3 Entering the IP Address 3. If prompted Mgmt. Protocols. Value-based, non-upgradeable HP Jetdirect print servers (for example HP Jetdirect 175x and 200m) do not support a secure embedded Web server. 4. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 108
IP address. CAUTION Changes to the IP address on the HP Jetdirect print server may result in printing failures for clients that have been configured to print to this printer using the previous IP address configuration parameters not supported by value-based print servers, such as HP 175x and 200m, - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 109
the attached device cannot be accessed or does not exist. The HP Jetdirect home page displays a generic printer graphic to represent the attached device. The HP Jetdirect print server's product model, firmware version, and network addresses are displayed along with any device information that can be - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 110
HP Jetdirect print server. The Internet Protocol address configured on the HP Jetdirect print server. For general information on IP addresses, see Appendix A. The LAN hardware (or MAC, Media Access Control) address of the HP Jetdirect print server. This unique address is assigned by Hewlett-Packard - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 111
Networking Tab The Networking tab provides access to HP Jetdirect network configuration parameters and status. The menu collected by HP will be used to improve product features and services. Personal data is not collected in accordance with HP privacy policies. See Hewlett-Packard Online Privacy - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 112
change your wireless network configuration parameters for your IEEE 802.11b wireless ethernet connection. In addition, you may also configure basic TCP/IP settings at the same time. The configuration parameters are summarized in Table 4.3. For more information on setting up your HP Jetdirect guide - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 113
other. Access Points are not used. Other terms used for Ad Hoc mode include Independent Basic Service Set (IBSS), and "computer-to-computer" mode. The factory-default mode configured on the HP Jetdirect print server is Ad Hoc. To initially communicate with the print server, your wireless computer - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 114
Each device on the network must use the same key. The HP Jetdirect print server supports IEEE 802.11 Wired Equivalent Privacy (WEP) keys for encrypted an authentication server, such as a RADIUS (Remote Authentication Dial In User Service, RFC 2138) server, for wireless network access. If EAP/802.1x - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 115
) the EAP protocols supported by the print server TLS requires an EAP User Name, Jetdirect Certificate, and CA specific configuration is not required, a unique combination of User Name, Password and digital certificates for EAP authentication may be specified. User Name Specify an EAP/802.1x user - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 116
Low, Medium, or High encryption strength. For each encryption strength, ciphers are specified to identify the weakest cipher allowed. Early browsers may only support 40-bit (Low) encryption levels. Jetdirect Certificate (EAP-TLS only) An X.509-compliant digital certificate that validates the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 117
on this page, assuming valid configuration entries have been made. Note: This parameter does not apply to security or wireless configuration wizards. Changes to wireless parameters through a wizard will always cause the print server to reauthenticate. If disabled (default), the print server will not - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 118
as the active key. The different key positions will have different encryption and decryption results. The HP Jetdirect wireless print server supports WEP keys for 40/64-bit and 104/128-bit encryption. To enter one or more WEP keys: Input keys in: Select whether you'll use alphanumeric characters or - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 119
encryption, you may select one of the following options: G Basic Encryption: Dynamic WEP encryption is supported. G Robust Encryption: Dynamic following basic TCP/IP settings at the same time that you configure your wireless connection settings: G IP Configuration Method G IP address G Subnet Mask - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 120
with a letter and can end in a letter or number, up to 32 ASCII characters. IP Address Use this field to manually assign the Internet Protocol address on the HP Jetdirect print server. The IP address is a four byte (32-bit) address in the form "n.n.n.n", where 'n' is a number from 0 to 255. An - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 121
services for network computers and devices. Secondary WINS Specifies the IP Address to be used for WINS if the primary WINS Server Server is unavailable. Syslog Server Specifies the IP address of a host computer that is configured to receive syslog messages from the HP Jetdirect specific and - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 122
of an LPD banner page for print jobs. For HP Jetdirect external print servers that provide multiple ports, you can configure each port. For internal print servers, only a single port is available (Port 1). Default IP Specifies the IP address to use when the print server is unable to obtain - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 123
Mode parameters in a Novell Directory Services (NDS) environment. G You cannot create the NDS print server, printer, and queue objects using the that the HP Jetdirect print server waits to send Service Advertising Protocol (SAP) messages, which are broadcast to advertise its service capabilities - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 124
default name is NPIxxxxxx, where xxxxxx are the last six digits of the HP Jetdirect print server's LAN hardware (MAC) address. NDS Tree Name Specify the name of the NDS tree for this device. The NDS (Novell Directory Services) tree name refers to the name of the organizational tree used by your - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 125
displayed include the AppleTalk printer types that are advertised on the network. The HP Jetdirect print server supports AppleTalk Phase 2 only can be displayed (for example, HP LaserJet and LaserWriter). Zone Select an available AppleTalk network zone for the printer. By default, the zone - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 126
change the SNMP (Simple Network Management Protocol) parameters provided. See Table 4.7. CAUTION If you use HP Web Jetadmin to manage your devices, you should use HP HP Jetdirect print server. An SNMP Get Community Name is a password to retrieve (or "read") SNMP information on the HP Jetdirect port - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 127
Upgrade: (for print servers that support firmware upgrades) to update your HP Jetdirect print server with new features and enhancements G LPD Queues: for setting up print queues used in printing under LPD (line printer daemon) printing services G USB Settings: (external print servers only) to - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 128
disable access to HP Jetdirect configuration parameters using Telnet. For more information, see Chapter 3. mDNS Enable or disable Multicast Domain Name System (mDNS) services. mDNS is typically used on small networks for IP address and name resolution (through UDP port 5353) where a conventional - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 129
(full- or half-duplex) for HP Jetdirect 10/100TX print servers. The available settings are listed below. CAUTION: If you change the link setting, network Server Specify the IP address of the preferred outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for use with supported Scan devices. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 130
source of selected messages during troubleshooting). By default, the HP Jetdirect print server uses LPR as the source facility code, but local user values of local0 through local7 can be used to isolate individual or groups of print servers. On fatal error (Supported external print servers only - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 131
and is used to resolve a particular device or service if socket information (such as the IP address) changes from session to session. Apple Rendezvous will display this service. The default service name is the printer model and the LAN Hardware (MAC) address. mDNS Domain Name (Read-only parameter - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 132
Settings (5 of 5) Description mDNS Highest Priority Service Specifies the mDNS highest priority service to use for printing.To set this parameter, choose one of the following printing options: 9100 Printing: Raw IP printing through HP-proprietary port 9100. IPP Printing: Internet Printing Protocol - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 133
if supported non-English languages are desired. LPD Queues The LPD Queues page allows you to specify LPD (line printer daemon) print queues on the Jetdirect print and their parameters cannot be changed. The remaining six queues can be defined by the user. The six user-defined queues can be set - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 134
ASCII characters. You can define up to six user-defined queues. Prepend String Name Enter the name of one or more strings to be added before (or prepended string names with different values. Append String Name Enter the name of one or more strings to be added after (or appended to) the print - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 135
instruction for the queue. Choose from these four queue types: G RAW -- No processing. The line printer daemon treats the data in a raw queue as a print job that has already been formatted in PCL, PostScript, or HP-GL/2, and sends it to the printer without modification. (Note that any user window) - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 136
top of the browser window), the line printer daemon sends the value of that string to the printer before or after the exceed this are discarded. To set up a user-defined print queue, you first define the strings the printer is "abcxyz". Instructions for setting up an LPD printer are - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 137
Example. If you had an LPD printer and wanted to reset it at the start of each print job, you could set up a user-defined print queue named "clear_printer" that issues a PCL reset command (Escape-E) at the beginning of each job. You could set this up as follows: First, - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 138
G Hi-Speed: 480 Mbits/sec for USB v2.0 devices only. G Disconnected: The USB port is not connected. Select the highest level of USB communication capabilities when the print server tries to establish a communication level with the printer. If you change the current setting, unplug and then reconnect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 139
features and services. By default, this feature is disabled. To enable this feature, check the checkbox and click Apply. To disable this feature, clear the checkbox and click Apply. Select Language This link appears if the HP Jetdirect Web pages support multiple languages. Supported languages may - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 140
The Wizard page allows you to run the HP Jetdirect Security Configuration Wizard. This wizard will guide you through the print server's security configuration needed defaults. The default settings displayed depend on the features supported by the print server. Only the security settings listed - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 141
and FTP firmware updates, RCFG, SNMP v1/v2c). To change individual protocol using HP Web Jetadmin. See SNMP. G Enable SNMPv1/v2 read-only access: Enable this option to allow support of current tools that rely on SNMP v1/v2 for device discovery and status. The Configuration Review page - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 142
of management protocols that are not secure (such as RCFG, Telnet and FTP firmware updates). SNMP Configuration pages are used to configure specific SNMP settings: G Enable SNMPv1/v2: Enable this option to allow management software that use SNMP v1/v2. If selected the SNMPv1/v2 Configuration page is - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 143
server, Telnet, and HP Web Jetadmin. In addition, for selected EIO printers, the password is shared with the printer (see Printer Password Synchronization below). If a password is set and you attempt to access Jetdirect print server settings, you will be prompted for a user name and this password - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 144
your settings. G Manually set the same administrator password using both the printer Security page and the networking Admin. Account page. Certificates (Full-featured HP Jetdirect print servers only) This tab provides access to installation, configuration and management services for X.509 digital - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 145
, or click Configure to update or install a new one. See Configuring Certificates. A CA certificate is not saved when the print server is reset to factory-default values. The maximum certificate size that can be installed on the HP Jetdirect print server is 3072 bytes. Configuring Certificates When - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 146
message. This message can be bypassed if the user adds it to their browser's certificate store or Using this option, you are prompted for specific device and organizational information in the following option is displayed only if there is a Jetdirect certificate request (to a trusted third party) - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 147
installed on the print server for use on other print servers. Using this option, you are prompted by the following screen: Export the Jetdirect certificate and private key. Delete CA Certificate. (Wireless print servers only) This option is used to remove the CA certificate installed on the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 148
a certificate from a Certificate Authority. Common Name. (Required) For HP Jetdirect print servers, specify the fully qualified domain name or a valid IP address for the device. Examples: G Domain Name: myprinter.mydepartment.mycompany.com G IP address: 192.168.2.116 The Common Name will be used to - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 149
). Access Control Use this tab to display the Access Control List (ACL) on the HP Jetdirect print server. An access control list (or host access list) specifies individual host systems, or no hosts are listed), any supported system can access the print server. ENWW Using the Embedded Web Server 149 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 150
feature. You may lose your ability to communicate with the HP Jetdirect print server if your system is not properly specified in network number 192. Allow all hosts on network 192, subnet 1. Allow the host with IP address 192.168.1.2. The mask 255.255.255.255 is assumed and is not required. To add - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 151
ports 80, 280, or 631 continue for Internet Printing Protocol (IPP) use, other non-secure communications (HTTP) are redirected to HTTPS. Redirection of your browser to use HTTPS may be transparent depending on your browser's capabilities. HP support the use of HTTPS communications, a Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 152
servers do not support an SNMP v3 agent. For a description of SNMP selections, see Table 4.7. SNMP v3. The HP Jetdirect print server includes an The SNMP v3 agent employs a User-based Security Model for SNMP v3 (RFC 2574), which features user-authentication and data privacy through encryption. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 153
these protocols, see Chapter 1. Because it uses TCP/IP, the embedded Web server does not allow disabling TCP/IP. Enable Print Services Enable or disable various print services supported by the print server: port 9100, LPD (Line Printer Daemon), IPP (Internet Printing Protocol), FTP (File Transfer - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 154
supported by the print server: SLP (Service Location Protocol). If enabled (checked), the HP Jetdirect services are provided. mDNS is typically used on small networks for IP address and name resolution (through UDP port 5353 IPX/SPX. Disabling Telnet, FTP firmware upgrades, and RCFG is recommended. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 155
through an "Integration URL". You can then use HP Web Jetadmin to provide enhanced management capabilities for this and other HP Jetdirect-connected devices on your network. HP Home HP Home provides a link to Hewlett-Packard's home page on the HP Web site (Internet access is required). This link - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 156
Help The Help page in the Networking tab provides a quick summary of the HP Jetdirect embedded Web server features. In the Help page, a link to the latest information on the embedded Web server is provided (Internet access is required). ENWW Using the Embedded Web Server 156 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 157
for LPD Printing Introduction The HP Jetdirect print server contains an LPD (Line Printer Daemon) Server module to support LPD printing. This chapter describes how to configure the HP Jetdirect print server for use with various systems that support LPD printing. These instructions include: G LPD on - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 158
associated with line-printer spooling services that may be installed on various TCP/IP systems. Some of the widely used systems in which the HP Jetdirect print server functionality supports LPD include: G Berkeley-based (BSD) UNIX systems G HP-UX G Solaris G IBM AIX G Linux G Windows NT/2000 G Mac - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 159
on the HP Jetdirect printer configuration page. If you have not printed a configuration page from your printer, see the hardware installation guide for your print server or your printer documentation for instructions. You must also have the following: G An operating system that supports LPD printing - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 160
-defined queue names, the line printer daemon adds user-defined strings before or after the print data (user-defined print queues can be set up through Telnet, Chapter 3, or the embedded Web server, Chapter 4). If the queue name is not one of the above, the HP Jetdirect print server assumes it to be - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 161
) :lf=/usr/spool/lpd/error_log_filename:\ :sd=/usr/spool/lpd/printer_name: where printer_name identifies the printer to the user, node_name identifies the printer on the network, and remote_printer_name_argument is the print queue designation. For more information on printcap, see the printcap - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 162
support automatic switching between PostScript, PCL, and HP-GL/2 languages, use the printer's control panel (if the printer has one) to select the printer language or rely on the application to select the printer language via commands embedded in the print data. Make sure your users know the printer - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 163
utility to configure remote print queues for printing "text" (ASCII) files or "raw" (PCL, PostScript, or other printer language) files. Before you execute the SAM program, select an IP address for the HP Jetdirect print server and set up an entry for it in the /etc/hosts file on your system running - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 164
: lpq -Pprinter_name where printer_name is the designated printer. Examples (for BSD-based systems): lpq -Ptext1 lpq -Praw1 For HP-UX systems, substitute lpstat for lpq -P to get print status. This completes the process for configuring the HP Jetdirect print server to use LPD. ENWW Configuring for - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 165
NT/2000 networks to use the HP Jetdirect LPD (Line Printer Daemon) services. The process consists of two parts: G Installing TCP/IP software (if not already installed). G Configuring a network LPD printer. Installing TCP/IP Software (Windows NT) This procedure lets you check whether you have - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 166
whether you should enable automatic TCP/IP configuration or whether you should type a static IP address, default gateway address, and subnet mask in the appropriate spaces. 4. Click OK to exit. 5. If prompted, exit Windows and restart your computer for the changes to take effect. ENWW Configuring - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 167
port, and select LPR Port. Click Next. 6. In the Add LPR compatible printer window: a. Enter the DNS name or IP address of the HP Jetdirect print server. b. For the name of the printer or print queue on the HP Jetdirect print server, enter (in lowercase) raw, text, auto, binps, or the name of a user - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 168
data. For a three-port HP Jetdirect external print server, attach a port number to the queue name (for example, raw1, raw2, or raw3). 7. Select the Manufacturer and Printer model. (If necessary, click Have Disk and follow the instructions to install the printer driver.) Click Next. 8. Choose - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 169
, and click Printers. The Printers window opens. 2. Double-click Add Printer. 3. Select My Computer, then click Next. 4. Click Add Port. 5. Select LPR Port, and click New Port. 6. In the Name or address of server providing lpd box, type the IP address or DNS name of the HP Jetdirect print server - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 170
server using the Windows Add Printer utility in the Printers folder. LPD on Windows XP Systems This section describes how to configure Windows XP networks to use the HP Jetdirect LPD (Line Printer Daemon) services. The process consists of two parts: G Adding Windows Optional Networking Components - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 171
. Click Next. 4. Select Create a new port, and select LPR Port from the pull-down menu. Click Next. 5. In the Add LPR Compatible Printer window, do the following: a. Type the Domain Name System (DNS) name or Internet protocol (IP) address of the HP Jetdirect print server. b. Type (in lowercase) the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 172
icon, and select Properties. 3. Select the Ports tab and Add Port. 4. Select LPR Port from the Printer Ports dialog box, and select New Port. 5. In the field labeled Name or address of server providing lpd, enter the DNS name or IP address of the HP Jetdirect print server. 6. In the dialog box - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 173
Mac OS 8.0. Assigning an IP Address Before you can set up a printer for LPR printing, assign an IP address to the printer or print server. Use the HP LaserJet Utility to configure the printer IP address as follows: 1. Double-click HP LaserJet Utility in the HP LaserJet folder. 2. Click the Settings - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 174
. 10. Enter a name and location for the desktop printer icon and click OK. The default name is the printer's IP address, and the default location is on the desktop. 11. Exit the program. For the latest information on using the HP Jetdirect LPD services from Mac OS systems, search for "LPR printing - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 175
printing described here requires the following: G HP Jetdirect print servers with firmware version x.24.01 or later. G TCP/IP client systems with FTP that complies with RFC 959. Note For the most recent list of tested systems, visit HP online support at www.hp.com/support/net_printing. ENWW 175 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 176
driver for the selected printer, then transfer the print file to the printer through an FTP session. For formatted print files, use binary (image) idle timeout can be set through various TCP/IP configuration tools, such as BOOTP/TFTP, Telnet, printer's control panel (see Chapter 3), the embedded - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 177
HP Jetdirect print server supports up to four control connections (or FTP sessions) simultaneously. If the number of allowed connections is exceeded, a message indicating that service is not available will be displayed. FTP control connections use TCP port system (for example, Windows NT may default - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 178
addition, the available HP Jetdirect ports for printing will be displayed. HP Jetdirect internal print server cards provide a single port (Port 1). HP Jetdirect external print servers with multiple ports will display all available ports, with Port1 the default port. To change ports, use the FTP cd - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 179
/ quit bye dir ls pwd put bin Description specifies a user. Any user will be accepted and can print to the selected port. selects a port number for printing. For HP Jetdirect single-port print servers, only port1 is available. For multiport print servers, specify port1 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 180
Configures an FTP ASCII file transfer. HP Jetdirect print servers support only non-print format control for character transfers (standard values for spacing and margins are used). Press the Ctrl and C keyboard keys simultaneously to abort the FTP service command and any transfer of data. The - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 181
.168.45.39. 220 JD FTP Server Ready User : susan_g 001 Username Ok, send identity as password Password: 230- Hewlett-Packard FTP Print Server Version 2.0 Directory: Description: PORT1 Print to port 1 HP color LaserJet 4500 To print a file, use the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 182
and other data stored on HP Jetdirect print servers. The features may differ depending on the version of firmware resident on the print server. on HP Jetdirect print servers, the prevention of unauthorized access cannot be guaranteed. For advanced security needs, contact HP Consulting services. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 183
and HP Web Jetadmin. IP Administrator Password G Used by Telnet, HP Web Jetadmin, and the embedded Web server to control access to HP Jetdirect Configured on the HP Jetdirect print server using TFTP (Chapter 3), Telnet (Chapter 3), embedded Web server (Chapter 4) services, or HP Web Jetadmin. Up - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 184
G Configured on the HP Jetdirect print server using TFTP (Chapter 3), Telnet (Chapter 3), embedded Web server (Chapter 4), or management software. Telnet Control G authentication and wireless encryption methods are supported. For example, support for 802.1x Extensible Authentication Protocol - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 185
or embedded Web server. For instructions, refer to the HP Web Jetadmin online help. G HP Web Jetadmin provides access control through User Profiles. User Profiles allow password protection for individual profiles and controlled access to HP Jetdirect and printer features. For more information, refer - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 186
Low Best suited for trusted environments. Any system can access the HP Jetdirect configuration parameters through the Embedded Web Server, Telnet, or SNMP management software. Passwords are not required. G Administrator password set G User-specified SNMP v1/v2 Set Community Name set G The Access - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 187
access enabled using certificates issued by trusted sources G Wireless Jetdirect print servers configured for 802.1x EAP authentication that use (for example, configurations from a BootP/TFTP or DHCP/TFTP server) may change the print server's settings when it is power-cycled. Be sure to confirm - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 188
associated with the HP Jetdirect print server. A flowchart guides you to the correct procedures for troubleshooting the following: G Printer problems G HP Jetdirect hardware installation and connection problems G Network-related problems To troubleshoot your HP Jetdirect print server, you may - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 189
when a cold-reset is performed on the printer. For selected HP LaserJet printers, a cold-reset is performed by power cycling the printer while pressing the Go button. For other printers, refer to your printer manuals. Or, visit http://www.hp.com/go/support and search for document file bpj02300.html - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 190
on. G HP Jetdirect External Print Servers Reset the HP Jetdirect external print server by holding down the Test button on the print server while connecting the power cord. After a cold reset, your network systems may lose their connection to the printer. ENWW Troubleshooting the HP Jetdirect Print - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 191
General Troubleshooting Troubleshooting Chart - Assessing the Problem Figure 8.1 Assessing the Problem ENWW Troubleshooting the HP Jetdirect Print Server 191 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 192
on the printer control panel display? I See Procedure 3 in this section for a list of network-related error messages and corrective actions. I See your printer documentation for a complete list of control panel messages and corrective actions. ENWW Troubleshooting the HP Jetdirect Print Server - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 193
the configuration page? The steps required to print a configuration page vary between different printers. See your printer manual or the hardware installation guide for your HP Jetdirect print server for specific instructions on how to print a configuration page. 2. Is there a print job in process - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 194
and YYYY is an error code) I Refer to your printer manuals to interpret the error message. I If you upgraded the Jetdirect firmware recently, power the print server off/on. For internal Jetdirect cards, turn the printer off and back on again. I Reinstall the HP Jetdirect print server to ensure - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 195
printer after the communications problem is solved to put the printer back online. Turning the Auto Continue feature on forces the printer to reconnect without user printer documentation for a complete list of control panel messages and corrective actions. ENWW Troubleshooting the HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 196
-specific. Check the workstation network drivers, printer drivers, and redirection (capture in Novell NetWare). 6. If other users are able to print, are they using the same network operating system? Check your system for proper network operating system setup. ENWW Troubleshooting the HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 197
troubleshooting section in the online help for the HP LaserJet Utility. I Verify the printer has the PostScript option installed. 11. If you are on a TCP/IP network, can you use Telnet to print directly to the printer? Use the following Telnet command: telnet where - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 198
). I See the troubleshooting section in the online help included with the HP Web Jetadmin software. 13. If you are using Microsoft Windows NT 4.0 (DLC/LLC), does the printer appear in the Add a Hewlett-Packard Network Peripheral Port dialog box? I Verify network and HP Jetdirect settings on the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 199
SSID of "hpsetup". G Multiple print servers are not being configured at the same time. If there are multiple print servers, turn all off except the one you want to configure. ENWW Troubleshooting the HP Jetdirect Print Server 199 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 200
I Encryption level, encryption key entries, or the specified transmit key I IP address I BSSID (Basic Service Set Identifier), which distinguishes one wireless LAN from another even though they have the same SSID. G Verify that the printer is within range of the network. See "Improving Reception and - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 201
(Windows) is used to configure the HP Jetdirect wireless print server with wireless network connection settings to access your network. If you are unable to use this wizard, refer to other options described in the HP Jetdirect Administrator's Guide for this print server model, supplied on the HP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 202
performance of all wireless devices. G Add an external antenna to the HP Jetdirect wireless print server (if it supports one). In most office environments, elevating the print server's external antenna will improve its range and performance. ENWW Troubleshooting the HP Jetdirect Print Server 202 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 203
Firmware Download Failure HP Jetdirect wireless print servers support network installation, or download, of firmware upgrades to provide new or enhanced features. As with other HP Jetdirect print servers, firmware upgrades may be downloaded using tools such as HP Download Manager (Windows), HP Web - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 204
use one of the following methods: I Use a "route add" command from your system prompt, or I Reconfigure the computer's IP address to match the default IP network of the Jetdirect print server (for example, use 192.0.0.193). 5. Run the HP download utility and complete the firmware download. 6. After - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 205
troubleshoot printing problems you may have with the HP Jetdirect print server. 1. Print a Jetdirect configuration page. 2. Verify that the IP configuration values are correct. If they are not, reconfigure the HP Jetdirect print server. 3. Log onto the host system and type: ping where - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 206
.) Use the HP-UX command lpstat -Pqname to find out if the queue has been disabled after the printer has powered up again or the connection is reestablished. The disabled queue can be restarted using the following command: HP-UX: enable qname ENWW Troubleshooting the HP Jetdirect Print Server 206 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 207
an important tool for managing or troubleshooting HP Jetdirect print servers. This page provides identification information (such as the HP Jetdirect model, firmware version, and LAN hardware address), as well as status and configuration parameters of supported network protocols. Network statistics - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 208
Configuration Page Format A typical Jetdirect configuration page is illustrated in Figure 9.1. The configuration page information provided will vary depending on the print server. Figure 9.1 Typical Jetdirect Configuration Page ENWW HP Jetdirect Configuration Page 208 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 209
, see Table 9.1. (For error messages, see Table 9.12.) USB Printer Information (HP Jetdirect external print servers only) Provides current status of the USB connection to the printer. See Table 9.2. (For error messages, see Table 9.12.) 802.11b Wireless (HP Jetdirect wireless print servers only - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 210
or device. This address is assigned by the manufacturer. FIRMWARE VERSION: The firmware revision number of the HP Jetdirect print server currently installed in the printer. The format is X.NN.NN, where X is a letter that depends on the HP Jetdirect print server model. PORT SELECT: (Ethernet only - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 211
of frames (packets) received by the HP Jetdirect print server without error. This includes broadcast, multicast packets, and packets specifically addressed to the print server. This number does not include packets specifically addressed to other nodes. ENWW HP Jetdirect Configuration Page 211 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 212
the USB connection between the print server and the device. Full Speed: 12 Mbits/sec as specified in the USB v2.0 specifications, compatible with USB v1.1 specifications. Hi-Speed: 480 Mbits/sec for USB v2.0 devices only. Disconnected: The USB port is not connected. ENWW HP Jetdirect Configuration - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 213
with the specified SSID, or has created a workgroup to which no one has joined. Error: A wireless connection error has occurred that prevents association or authentication with an Access Point (Infrastructure will continue to scan for the specified SSID. ENWW HP Jetdirect Configuration Page 213 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 214
in Ad Hoc mode. Basic Service Set Identifier (BSSID) is a 6-byte number that distinguishes one wireless LAN (WLAN) from another, even if they have the same Network Name (SSID). Infrastructure Mode: The MAC address or name of the Access Point to which the Jetdirect wireless print server is connected - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 215
was automatically sensed from the network, this channel may differ from the user-configured channel (which is only used for broadcasts if the specified network/ Protocol (EAP) uses network authentication servers for client access. HP Jetdirect EAP support includes LEAP, PEAP, EAP-MD5, EAP-TLS, and - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 216
an IP Administrator password has been configured on the print server. This password is shared by Telnet, the embedded Web server, and HP Web Jetadmin a browser and the HP Jetdirect embedded Web server. Optional (HTTPS/HTTP): Allows unencrypted communications using standard HTTP ports, as well as - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 217
are supported, and SNMP v.3 is disabled, or not supported. user-specified SNMP set community has been set. Access List: Identifies whether a host access control list is configured on the HP Jetdirect print server. A host access control list specifies the IP address of individual systems, or IP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 218
Total number of frames (packets) received by the HP Jetdirect print server without error. This includes broadcast, multicast packets, and packets specifically addressed to the print server. This number does not include packets specifically addressed to other nodes. UNICAST PACKETS RECEIVED: Number - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 219
with the frame copy error indicated in the Frame Status (FS) field. The number of Token Ring frames received with frame length errors. The number of Token Ring frames lost. Total number of times a violation of the token-passing protocol has been detected. ENWW HP Jetdirect Configuration Page 219 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 220
For error messages, see Table 9.12. Table 9.6 TCP/IP Configuration Information (1 of 4) Message STATUS: HOST NAME: IP ADDRESS: SUBNET MASK: Description Current TCP status. READY: Indicates the HP Jetdirect print server is awaiting data over TCP/IP. DISABLED: Indicates that TCP/IP was manually - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 221
Protocol. USER SPECIFIED: Manual configuration through Telnet, the printer's control panel, HP Web Jetadmin, embedded Web server, or other method. DEFAULT IP: The default IP address was assigned. This address may not be a valid address for your network. AUTO IP: A link-local IP address (169 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 222
Jetdirect print server resides (for example, support.company.com). It is not the fully qualified DNS name (for example, printer1.support.company.com) because the host printer name is not included. NOT SPECIFIED: Indicates that a domain name has not been configured on the print server. The IP address - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 223
Table 9.6 TCP/IP Configuration Information (4 of 4) Message Description WEB JETADMIN URL: If the HP Jetdirect print server is found on the network by HP Web Jetadmin, the URL of the host system used for HP Web Jetadmin services is displayed. The URL is limited to two lines and may be truncated. - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 224
. READY: Indicates the HP Jetdirect print server is awaiting data over IPX/SPX. DISABLED: Indicates that IPX/SPX was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 225
that the HP Jetdirect print server is still trying to determine which network number to use. The second column (Frame Type) identifies the frame type used with the associated network number: EN_8023, EN_8022, EN_II, EN_SNAP, TR_8022, TR_SNAP. Unless a specific frame type has been manually configured - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 226
status. READY: Indicates the HP Jetdirect print server is awaiting data. DISABLED: Indicates that IPX/SPX was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message is - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 227
print jobs in a print queue. The default is 2 seconds. SAP INTERVAL: Specifies the time interval (seconds) that the HP Jetdirect print server waits between Service Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. SERVER x: Identifies a NetWare file server to which - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 228
status. READY: Indicates the HP Jetdirect print server is awaiting data. DISABLED: Indicates that AppleTalk was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message is - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 229
status. READY: Indicates the HP Jetdirect print server is awaiting data. DISABLED: Indicates that DLC/LLC was manually disabled. INITIALIZING: Indicates that the print server is registering the node address or name. An additional status message may also be displayed. An error code and message is - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 230
error codes may be detected: Function Failure: The HP Jetdirect print server is unable to transmit to itself while wrapped through its lobe at the Token Ring wiring concentrator. This message may also indicate that data frames were received before physical insertion. Signal Loss: Indicates one - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 231
print server is transmitting beacon frames to the ring. Hard Error: The HP Jetdirect print server is transmitting or receiving beacon frames to or from the ring. Signal Loss: Indicates one of the following: G The HP Jetdirect print server has detected a loss of signal on the ring. Check the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 232
printer off, then on again. If the error persists, replace the HP Jetdirect print server. 07 AUTHENTICATION FAILED (802.11b Wireless) The Jetdirect print LAN ERROR INFINITE DEFERRAL There is a network congestion problem. Note: If the print server is not connected to the network, this error cannot - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 233
. If the connections are intact, run the power-on self-test: turn the printer off, then on again. If the error persists, replace the HP Jetdirect print server. For replacement instructions, see the hardware installation guide for your print server. 09 SCANNING FOR SSID (802.11b Wireless) The print - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 234
the power-on self-test: turn the printer off, then on again. If the error persists, there is a problem with the HP Jetdirect print server. 10 LAN ERROR-AUTO (Token Ring) The HP Jetdirect print server detected an REMOVAL internal hardware error following the Token Ring beacon auto-removal process - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 235
to the specified NetWare node name. Use printer installation software, a NetWare utility (such as PCONSOLE), or other tool to create the print server object. When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page if - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 236
when the HP Jetdirect print server attempted to reserve the printer number. This indicates a possible network problem, or a problem with the This may indicate a network problem. When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 237
not given its permission to do so. This indicates a possible print server problem, possibly a software problem. 28 OUT OF BUFFERS The HP Jetdirect print server was unable to allocate a buffer from its internal memory. This indicates all buffers are busy due possibly to heavy broadcast traffic or - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 238
at this time or a communications problem may exist. 30 NDS PRINT SERVER NAME ERROR The HP Jetdirect print server object cannot be located in the specified NDS context. 31 NDS PS PRINTER Cannot locate a list of printers objects that should be LIST ERROR assigned to the print server object - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 239
and not a printer or other object. 3F UNABLE TO GET NDS SRVR ADDR The NDS server address cannot be located or accessed. 40 ARP DUPLICATE IP ADDRESS The ARP layer has detected another node on the network using the same IP address as the HP Jetdirect print server. Extended error information below - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 240
of 11) Error Code and Message Description 46 INVALID SERVER ADDRESS The TFTP server IP address specified for the HP Jetdirect print server (through BOOTP) is an invalid IP address for specifying a single node. Check your Bootptab file for proper entries. 47 INVALID TRAP DEST ADDRESS One of the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 241
does not support AppleTalk or AppleTalk extensions. 59 INCOMPLETE F/W - Firmware download message. Currently downloading MUST DOWNLOAD firmware to the HP Jetdirect print server, or the download did not complete properly. 5A TURN PRINTER OFF / ON Firmware download message. Download of firmware is - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 242
down because of a configuration change or reset request. This message automatically clears after a few seconds, unless the printer is offline, is in an error state, or is servicing another I/O port or another network protocol. The print server detected a DHCP lease error due to one of the following - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 243
is sent independently of one another. Each packet is encoded with IP information, such as the IP address of the sender and receiver. IP packets can be IP communications to be efficient. Each node or device that will communicate directly onto the network requires an IP address, including HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 244
(workstation or node) on an IP network requires a unique IP address for each network interface. This address is a software address that is used to identify both the network and specific hosts located on that network. Each IP address can be divided into two separate parts: the network portion and the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 245
portion of an IP address, see "IP Address Structure and Class" and "Subnets" later in this appendix. IP Address: (Host Portion) Host addresses numerically identify specific network interfaces on an IP network. Usually a host has only one network interface; thus, only one IP address. Because no two - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 246
For efficiency in routing, networks were broken down into three classes, so routing can begin simply by identifying the leading byte of information in the IP address. The three IP addresses that InterNIC assigns are class A, B, and C. The network class determines what each of the four - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 247
parameters (such as IP address, subnet mask, default gateway) can be configured on the HP Jetdirect print server in a variety of ways. These values can be configured manually (for example, through Telnet, the embedded Web server, the arp and ping commands, and HP management software), or they can - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 248
Subnets When an IP network address for a particular network class is assigned to an organization, no provision is made for more than one network being present at that location. Local network administrators use subnets to partition a network into several different subnetworks. Splitting a network - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 249
User Datagram Protocol (UDP) port 514 for incoming messages. The messages are processed depending on their priority and on how syslogd is set up to operate. You can configure the HP Jetdirect print server with the syslog server's IP address. When a syslog server is configured, both the HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 250
the applicable sections in this guide. Selected syslog parameters on the HP Jetdirect print server are listed in Table A.4. Table A.4 HP Jetdirect Syslog Parameters Item Syslog Server IP address Syslog Maximum Messages Syslog Priority Syslog Facility Description IP address of a syslog server for - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 251
Oct 22 15:08:58 jd04 printer: error cleared Oct 24 17:52:27 jd37 printer: powered up Oct 24 18:28:13 jd37 printer: printer is disconnected Oct 24 18:37:46 jd07 printer: error cleared Oct 24 18:38:42 jd37 printer: powered up Oct 25 07:50:16 jd04 printer: toner/ink low ENWW TCP/IP Overview 251 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 252
802.11b Wireless Print Servers Introduction HP Jetdirect wireless print servers are printer accessories that support the IEEE 802.11b standard for a performance depends on a variety of factors, including the number of users, the quality and physical placement of the wireless hardware, and the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 253
HP Jetdirect wireless print servers on an IEEE 802.11b wireless LAN, this section provides an overview of some basic concepts that you may find helpful. For more information, refer to the documentation provided with your computer's wireless network interface card to as a Basic Service Set (BSS). It - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 254
may also provide Access Point services. For example, a Residential users that have only occasional network communication needs. In addition, the distance between a wireless device and the Access Point will affect performance; longer distances degrade data transmission rates. ENWW HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 255
Mode is referred to as an Independent Basic Service Set (IBSS). You may also hear the term printer. Note that HP Jetdirect Peer-to-Peer printing can be used on either Infrastructure or Ad Hoc (Peer-to-Peer) mode wireless topologies. Although network performance depends on the types of users - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 256
allowed. Because of frequent changes to existing standards, you one required. The channels available on your HP Jetdirect wireless print server depend on your print server model. For supported channels, see the documentation included with your HP Jetdirect wireless print server. ENWW HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 257
it is usually easily identified. However, as a network administration or management feature, it does provide basic network access control. HP Jetdirect print servers support a broadcast SSID, sometimes called a zero-length or "blank" SSID. If a blank SSID is configured in Infrastructure mode, the - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 258
security requirements. Consequently, the authentication method is closely associated with encryption options also used on the network. The authentication methods supported by the HP Jetdirect wireless print servers include: Open System, Shared Key, EAP/802.1x, and EAP/PSK. Open System. Open System - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 259
networks that use authentication servers, such as a RADIUS (Remote Authentication Dial In User Service, RFC 2138) server, for client authentication on a network. HP Jetdirect 802.11b wireless print servers support popular authentication methods based on EAP, including: G LEAP (Lightweight Extensible - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 260
may be "self-signed", which is similar to validating your own identity. To support EAP/PSK and selected EAP/802.1x authentication methods, an HP Jetdirect print server may need to contain one or both of the following certificates: G CA Certificate. A certificate from a trusted Certificate Authority - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 261
print server can store up to four static WEP keys, although only one is active at a time. These WEP keys will remain the same (hence, static) until the network administrator changes them. HP Jetdirect wireless print servers support 40/64-bit and 104/128-bit encryption. When configuring a static 64 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 262
/802.1x authentication methods PEAP, EAP-TLS, EAP-TTLS. Robust Encryption provides for dynamic WPA and WEP encryption protocols. If WPA dynamic encryption is not supported by your HP Jetdirect wireless print server, EAP/PSK authentication and Robust Encryption selections will not be available. ENWW - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 263
the message "I/O Card Ready". In addition, the status of each protocol will be displayed. I For internal print servers, a Jetdirect configuration page typically prints along with your Printer's configuration page. Refer to your printer's documentation for control panel or other instructions to print - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 264
your computer manually. Before You Begin... Before you begin to configure a wireless connection, you should do the following: G Verify that the HP Jetdirect wireless print server hardware has been installed and is operating properly. G Verify that the printer and HP Jetdirect print server - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 265
your computer. After you have changed the specified wireless settings on your computer, the print server will automatically adapt its channel to the one used by your computer. 3. Proceed to To Configure the Jetdirect Print Server for Your Network. ENWW HP Jetdirect 802.11b Wireless Print Servers - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 266
Setup Wizard is distributed on the HP Jetdirect CD-ROM, which is included with standalone HP Jetdirect wireless print servers, and may be downloaded from HP online support at: http://www.hp.com/support/net_printing 1. Run the wizard and follow the instructions on the screen. After your wireless - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 267
your settings. If necessary, click TCP/IP Settings to set your IP address. Some networks may require presetting TCP/IP parameters for network access (for example, to accommodate special DHCP requirements or Access List restrictions). 4. When your HP Jetdirect print server has been configured with - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 268
add command is entered as follows: route add where is the IP address on the HP Jetdirect print server, and is the IP address set on the computer's network card. Example: route add 192.0.0.192 192.170.1.2 ENWW - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 269
to use one. 6. In the Jetdirect embedded Web IP settings: I IP Configuration Method I IP address I Subnet Mask I Default Gateway If you change the IP address and click Apply, you may lose communications with the print server. To reconnect, use the new IP address. 9. When your HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 270
browser's use of proxies, if required. To install the printer on your wireless computer, see Install the Printer on Your Network Systems. G Apple Macintosh You can use /IP networking settings (such as an IP address). For information on TCP/IP networking, see Appendix A. 1. Inspect your HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 271
, you will need to restore your TCP/IP configuration after you have set up the HP Jetdirect print server. 3. If necessary, change the computer's IP address so that it is on the same IP subnet as the HP Jetdirect print server. For example, if the default IP address of the print server is 192.0.0.192 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 272
configuration. G Either clear the checkboxes for configuration ports of other networks, or drag-and-drop AirPort to the top of the list. G Click Apply Now. d. Click the TCP/IP tab. Select to configure TCP/IP Manually. Enter an IP address that matches the IP subnet of the print server. For example - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 273
help for instructions. 5. In the Jetdirect embedded Web IP settings: I IP Configuration Method I IP address I Subnet Mask I Default Gateway If you change the IP address and click Apply, you may lose communications with the print server. To reconnect, use the new IP address. 8. When your HP Jetdirect - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 274
parameters will provide an indication that the printer is communicating on the network. G Send a "ping" command to the HP Jetdirect print server's IP (Internet Protocol) address. The IP address will be listed on the Jetdirect configuration page. If the default IP address 192.0.0.192 is set, it may - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 275
for Microsoft Windows systems, and the HP LaserJet Utility for Apple Macintosh systems. These utilities are included on the HP Jetdirect CD-ROM and incorporated into printing system utilities supplied with many HP printers. For additional HP software utilities, see Chapter 2. ENWW HP Jetdirect 802 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 276
printer manuals for more information. The HP Jetdirect internal print servers support the following printer control panels: G Classic Control Panel display with menu and parameter selection buttons G Graphical Control Panel display with navigation and numeric keypads (available on newer HP LaserJet - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 277
you want to access the Jetdirect menu. NO (default): Bypass the HP Jetdirect menu. YES: Access the HP Jetdirect menu. You must change this to YES* each time MODE: Choose one of the following wireless topologies: I AD HOC (default) I INFRA. (Infrastructure Mode) ENWW The HP Jetdirect Control Panel - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 278
Table C.1 HP Jetdirect Classic Control Panel Menu (2 of 6) Menu Item Description SSID: Choose one of the following selections: I select Open System I SHARED to select Shared Key I EAP to select among supported IEEE 802.1x Extensible Authentication Protocol (EAP) options that use an authentication - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 279
either Basic encryption or Robust encryption depending on your network. Dynamic encryption protocols are under the control of the authentication server and also must be supported by the Access Point. ENWW The HP Jetdirect Control Panel Menu 279 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 280
Table C.1 HP Jetdirect Classic Control Panel Menu (4 of 6) Menu Item TCP/IP= IPX/SPX= DLC/LLC= ATALK= you selected 128- or 64-bit encryption and is used to specify the active transmit key. Choose one of the transmit encryption key positions (key 1, 2, 3, or 4). The selected transmit key must have - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 281
(default is 270 seconds, 0 disables the timeout) G (620n Only) CFG DNS=YES* will allow you to specify the IP address of a DNS server, one byte at a time. Print a Jetdirect configuration page to verify your settings. However, note that the print server may overwrite selected parameters with values - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 282
to manually configure the HP Jetdirect print server One of the following link configurations can be set: AUTO (default): The print server will automatically configure itself to match the network's link speed and communication mode. If it fails, 100TX Half will be set. 10T HALF: 10Mbps, half-duplex - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 283
lines at a time. In addition, scrolling may be supported to allow display of additional lines. MENUS + XXXXXXXXXX + XXXXXXXXXXXX + XXXXXXXX ? On graphical control panels, a numeric keypad and navigation buttons are used to access HP Jetdirect menu items. For a description of menu items and options - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 284
Table C.2 HP Jetdirect Graphical Control Panel Menu (2 of 7) Menu Item Options AUTHENTICATION CONFIGURE EAP Description of settings Choose one of the following authentication methods for your network: OPEN SYSTEM: Network authentication is not required or used. SHARED KEY: Requires a WEP - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 285
HP Jetdirect Graphical Control Panel Menu (3 of 7) Menu Item Options SECURITY CONFIGURE PSK Description of settings This menu is displayed only if EAP Authentication has been selected. Set the following parameters: USER NAME: Enter a User server and also must be supported by the Access Point. PASS - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 286
Table C.2 HP Jetdirect Graphical Control Panel Menu (4 of 7) Menu Item Options ENCRYPTION CONFIGURE KEYS RESET 802.11b Description of settings This exit and re-enter the control panel menu. NO (default): 802.11b wireless parameters are not reset. ENWW The HP Jetdirect Control Panel Menu 286 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 287
IP address are released. This menu appears if CONFIG METHOD was set to DHCP and a DHCP lease for the print server exists. G NO (default): The print server does not request to renew the DHCP lease. G YES: The print server requests to renew the current DHCP lease. ENWW The HP Jetdirect Control - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 288
HP Jetdirect Graphical Control Panel Menu (6 of 7) Menu Item IPX/SPX Options Description of settings MANUAL SETTINGS (Available only if CONFIG METHOD is set to MANUAL) Configure parameters directly from the printer control panel: G IP ADDRESS n.n.n.n: The unique IP address of the printer one - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 289
the network's link speed and communication mode. If it fails, 100TX HALF is set. 10T HALF: 10Mbps, half-duplex operation. 10T FULL: 10 Mbps, full-duplex operation. 100TX HALF: 100 Mbps, half-duplex operation 100TX FULL: 100 Mbps, full-duplex operation ENWW The HP Jetdirect Control Panel Menu 289 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 290
features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 291
as the author of the parts of the library used. This Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([email protected])" THIS SOFTWARE GOODS OR SERVICES; LOSS OF - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 292
, Default IP address embedded Web server 120 AUTONEGOTIATION 211 AUTO-REMOVAL ERROR 231 B BAD BOOTP REPLY 240 BAD BOOTP TAG SIZE 241 BAD PACKETS RCVD 218 banner page embedded Web server 122 Telnet configuration 88 TFTP configuration 55 Basic Encryption dynamic encryption 85, 119 Basic Service Set - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 293
240 UNKNOWN KEYWORD 240 channel wireless communications 83, 113, 255, 256 Chooser, Apple 35, 197 clients, supported HP IP/IPX Printer Gateway 30 Internet Printer Connection 26 software solutions 17 cold-reset 189 Communication Mode classic control panel 277 embedded Web server 113 graphical control - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 294
54 DUP NODE ADDRESS 230 dynamic encryption supported ciphers 152 ERR NEGOTIATING BUFFER SIZE 236 error messages 232 802.11b wireless 213 HP Jetdirect configuration page 207 printer IP from Telnet 100 wireless parameters 112, 280, 286 FAIL RESERVING PRINTER NUM 236 FIRMWARE REVISION 210 firmware - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 295
TO SERVER 242 installing AppleTalk software 32 HP Web JetAdmin software 24 wireless print servers 263 Internet Printer Connection software introduction 26 supported proxies 27 system requirements 27 Internet Printing Protocol, See IPP INVALID GATEWAY ADDRESS 239 IP ADDRESS 239 PASSWORD 242 SERVER - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 296
94 TFTP configuration 60 J Jetdirect certificate 144, 260 embedded Web server 116 L LAN ERROR AUTO REMOVAL 234 BABBLE 233 address (LAA) 96, 110, 129, 210 LPD (Line Printer Daemon), See LPD printing LPD printing Mac OS 173 setup overview 159 TFTP configuration 55 UNIX 161 troubleshooting 205 Windows - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 297
DLC/LLC 229, 230 Errors 232 General 210 HP Jetdirect configuration page 207 IPX/SPX 224 TCP/IP 220 Model number configuration page 210 product list 8 Multicast Domain Name System (mDNS) embedded Web server 128, 154 Telnet 90 TFTP 57 N NDPS, See HP IP/IPX printer gateway for NDPS NDS AUTHENTICATION - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 298
Information Service) 45 PASSWORD ERROR 235 password, administrator printer synchronization supported 8 PRINT SERVER NOT DEFINED 235 printcap file 161 printer control panel 101, 276 printer gateway, See HP IP/IPX printer gateway for NDPS PRINTER NUMBER IN USE 235 PRINTER NUMBER NOT DEFINED 235 printer - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 299
embedded Web server 126 security features 185 Telnet configuration 94 TFTP configuration 59, 60 SNMP v3 185 embedded Web server 127 software installation AppleTalk (Mac OS) 32 HP Web JetAdmin 24 speed, USB 97, 138 SSID (Service Set Identifier) 114, 257 See also, Network Name control panel 278, 283 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 300
802.11b wireless 213 AppleTalk 228 General 210 IPX/SPX 224 TCP/IP 220 subnet mask 220 bootptab file parameter 48 overview 248 printer control panel 101 TFTP host access list 56 Windows configuration 68 subnets 248 supported network protocols 9 syslog parameters 250 embedded Web server 121 Telnet - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 301
wireless print servers 252 configuration page messages 213 default IP configuration 41 embedded Web server 112 installation overview 263 Telnet 82 troubleshooting 199 X XMIT COLLISIONS 218 XMIT LATE COLLISIONS 218 Z zone, AppleTalk embedded Web server 125 HP LaserJet Utility 35 Telnet 95 ENWW 301 - HP 4300n | HP Jetdirect Print Servers - Administrator Guide - Page 302
© 2004 Hewlett-Packard Development Company, L.P. English
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
 |
 |
hp
jetdirect
administrator's
guide
610n
615n
620n
680n
175x
310x
380x
en3700
200m
250m
280m