HP 438031-B21 HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b
HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Manual
UPC - 882780885165
View all HP 438031-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 438031-B21 manual content summary:
- HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 1
HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide Part number: 445880-001 First edition: April 2007 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 3
Contents Contents Getting started Introduction ...8 Additional references ...8 Features...8 Requirements...8 Switch setup ...9 Configuring IP interfaces ...9 Enabling or disabling BBI access...9 Web browser setup...9 Starting the BBI ...10 Browser-based interface basics Introduction ...13 Toolbar - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 4
Contents RMON History Group Information...47 RMON Alarm Group Information ...48 RMON Event Group Information ...50 IP Interfaces Dashboard ...51 Route Table Information ...52 ARP Cache Information...54 Network Filters Dashboard...56 Route Map Dashboard ...57 Route Map Dashboard ...58 Default - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 5
Contents Network Time Protocol Statistics...93 Switch Ports Statistics Summary...94 Port Statistics ...95 Bridging ("dot1") Statistics ...96 Interface ("if") Statistics - Input...96 Interface ("if") Statistics - Output ...97 Ethernet ("dot3") Statistics ...98 GEA IP Statistics...99 Switch Ports 802. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 6
Contents Switch Image and Configuration Management buttons 155 Management Network Definition Configuration 156 Switch Ports Configuration ...157 Switch Port Configuration...158 Switch Port ACL Configuration ...161 Port-Based Port Mirroring Configuration 162 Monitoring Port Configuration...163 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 7
Contents IGMP Filtering Port Configuration ...209 IGMP Filtering - Port Configuration 209 IGMP Static Multicast Router Configuration 210 Static Multicast Router Configuration for Port 211 OSPF General Configuration ...212 OSPF MD5 Key Configuration ...213 OSPF Areas Configuration ...213 OSPF Area - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 8
bladesystem/documentation. • HP 1:10Gb Ethernet BL-c Switch User Guide • HP 1:10Gb Ethernet BL-c Switch Application Guide • HP 1:10Gb Ethernet BL-c Switch Command Reference • HP 1:10Gb Ethernet BL-c Switch ISCLI Reference • HP 1:10Gb Ethernet BL-c Switch Quick Setup Instructions Features The network - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 9
an IP interface for management access, see the "Using the command line interface" section in the "Accessing the switch" chapter of the HP 1:10Gb Ethernet BL-c Switch Application Guide. Enabling or disabling BBI access By default, BBI access is enabled. If you need to disable or re-enable access, use - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 10
Getting started Starting the BBI When the switch and browser setup is complete, follow these steps to launch the BBI: 1. Start your Web browser. 2. Enter the switch IP interface address in the Web browser Uniform Resource Locator (URL) field. For example, if the switch IP interface has a network IP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 11
Getting started 3. Log in to the switch. If your switch and browser are properly configured, you will be asked to enter a password. Enter the account name and password for the switch. For more password information, see the HP 1:10Gb Ethernet BL-c Switch Command Reference Guide. 11 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 12
Getting started 4. Allow the BBI Dashboard page to load. When the proper account name and password combination is entered, the BBI Dashboard page is displayed in the browser viewing area. NOTE: There may be a slight delay while the Dashboard page is initializing. You should not stop the browser - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 13
Browser-based interface basics Browser-based interface basics Introduction Once you are properly logged in, the switch BBI displays in the Web browser-viewing window. There are three main regions on the screen. • The Toolbar is used for selecting the context for your actions in the other windows. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 14
Browser-based interface basics Context buttons The toolbar is used for setting the context for your actions in the application. There are three context buttons: Table 1 Context buttons Button Configure Statistics Dashboard Description When selected, you can access and alter the switch - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 15
Browser-based interface basics Navigation window The navigation window is used for selecting a particular switch feature to act upon. Status, statistics, or configuration forms for the selected item will display in the forms window, depending on the context chosen on the toolbar. The navigation - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 16
. The following provides a basic outline for viewing the dashboard forms. You should first be familiar with configuration as covered in the HP 1:10Gb Ethernet BL-c Switch Command Reference. Steps for displaying dashboards Follow these basic steps for viewing switch dashboard forms. 1. Select the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 17
Dashboard 2. Select a feature icon in the navigation window. For example, select Spanning Tree Groups: 17 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 18
3. View information shown in the forms window. Dashboard NOTE: Items that load other forms when selected are underlined. 4. Select an underlined item to view details or perform actions. 18 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 19
Dashboard In this example, click a Spanning Tree Group number to view detailed information about the group (shown in form below). 19 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 20
Dashboard Switch Dashboard To display the following form, select System > General. This is the default form for the switch. The following table describes the Switch Dashboard controls: Table 3 Switch Dashboard controls Control Switch Name Switch Location Switch Type Rack ID Rack Name Description - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 21
Dashboard Table 3 Switch Dashboard controls Control Enclosure Enclosure Name Bay Number Switch Up Time Last Boot Time Time and date Daylight Savings Location MAC Address IP Address Hardware Revision Switch Serial No Hardware Part No HW Spare Part No Software Rev Banner Description Displays the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 22
ID User Name COS Password Status Login Description Displays the numeric identifier for the user Displays the name of the user. Displays the Class of Service level for the user. Indicates whether a valid password is defined for the user. Displays whether the user is enabled or disabled. Displays the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 23
RADIUS Dashboard To display the following form, select System > Radius. Dashboard The following table describes the switch RADIUS Dashboard controls: Table 5 RADIUS Dashboard controls Control Primary Radius IP Address Secondary Radius IP Address Current RADIUS server Radius port Radius timeout - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 24
Dashboard Table 5 RADIUS Dashboard controls Control Description Secondary Radius Server Secret Displays the secondary shared secret between the switch and the RADIUS server(s). TACACS+ Dashboard To display the following form, select System > Tacacs+. 24 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 25
switch and the TACACS+ server(s). Displays the secondary shared secret between the switch and the TACACS+ server(s). Displays the TACACS+ server privilege levels. Displays the HP 1:10GbE switch privilege-level mapping. 25 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 26
describes the Network Time Protocol Dashboard controls: Table 7 NTP Dashboard controls Control NTP Server IP Address Resync Interval (1-44640) NTP Service Status Description Displays the IP address of the active NTP server. Displays the configured interval used to resynchronize the switch clock - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 27
Dashboard Switch Image and Configuration Management Dashboard To display the following form, select System > Config/Image Control. The following table describes the Switch Image and Configuration Dashboard controls: Table 8 Switch Image and Configuration Dashboard controls Control Active Image - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 28
Dashboard Management Network Definition Dashboard To display the following form, select System > Mgmt. The following table describes the Management Network Definition Dashboard controls: Table 9 Management Network Definition Dashboard controls Control Entry Management Network Management Network - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 29
SFP Information To display the following form, select System > SFP. Dashboard The following table describes the status of each Small Form Pluggable (SFP or XFP) module on each fiber external port. Table 10 SFP Information Control Port Device TX-Enable RX-Signal TX-Fault Description Displays the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 30
Dashboard Switch Ports Dashboard To display the following form, select Switch Ports (click the underlined text, not the folder). The following table describes the Switch Ports Dashboard controls: Table 11 Switch Ports Dashboard controls Control Status Switch Port Info Operational Status Speed/ - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 31
Dashboard Table 11 Switch Ports Dashboard controls Control Link State Changes/Total Errors Description Displays the total number of link state changes for this port and the total number of errors logged by this port. For more information, select a port number to display detailed statistics for - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 32
Switch Ports 802.1x Dashboard To display the following form, select Layer 2 > 802.1x > Switch Ports. Dashboard The following table describes the Switch Ports 802.1x Dashboard fields: Table 13 Switch Ports 802.1x Dashboard Field Port Auth Mode Auth Status Ctrl Dir Description Displays each port's - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 33
Dashboard Table 13 Switch Ports 802.1x Dashboard Field Authenticator PAE State Backend Auth State Description Displays the Authenticator Port Access Entity State. The PAE state can be one of the following: • initialize • disconnected • connecting • authenticating • authenticated • aborting • held - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 34
Dashboard The following table describes the Port 802.1x Dashboard controls: Table 14 Port 802.1x Dashboard controls Control Authentication Mode Authentication Status Controlled Direction Authenticator PAE State Backend Authentication State Reset Reauthenticate Description Displays the Access - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 35
was learned. The FDB also shows which other ports have seen frames destined for a particular MAC address. NOTE: The master forwarding database supports up to 8K MAC address entries on the MP per switch. The following table describes the Forwarding Database Information controls: Table 15 Forwarding - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 36
Dashboard Table 15 Forwarding Database Information controls Control Trunk State Learned Port Permanent Description Displays the trunk number of the FDB entry, if applicable. Displays the port state of the FDB entry. Displays the port number of the port that received the FDB entry. Displays - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 37
Dashboard The following table describes the VLANs Dashboard controls: Table 16 VLANs Dashboard controls Control Search Range Search Options VLAN ID VLAN Name VLAN Ports State Description To search for a VLAN, enter a range of VLAN numbers in the From and To fields. To focus the search for a VLAN, - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 38
Dashboard Switch Spanning Tree Groups Information To display the following form, select Layer 2 > Spanning Tree Groups (click the underlined text, not the folder). 38 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 39
Dashboard The following table describes the Switch Spanning Tree Groups Information controls: Table 17 Switch Spanning Tree Groups Information controls Control Search Range Search Options Spanning Tree Group State Bridge Priority Bridge Hello Time Bridge Max Age Bridge Forward Delay Bridge Aging - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 40
Dashboard Switch Spanning Tree Group Information To display the following form, go to the Switch Spanning Tree Groups Information form. Select a Spanning Tree Group number. The following table describes the Switch Spanning Tree Group Information controls: Table 18 Switch Spanning Tree Group - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 41
Dashboard Table 18 Switch Spanning Tree Group Information controls Control Path Cost Root Port Max Age Hello Time Forward Delay Hold Time Topology Change Counts Aging Time Bridge Priority Bridge Hello Time Bridge Max Age Bridge Forward Delay Bridge Aging Time Description Displays the cumulative - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 42
Dashboard Table 19 Switch Spanning Tree Port Information controls Control Port Priority Port Cost Designated Bridge Designated Port Description Helps determine which bridge port becomes the designated port. In a network topology that has multiple bridge ports connected to a single segment, the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 43
Dashboard The following table describes the Switch Trunk Groups Dashboard controls: Table 20 Switch Trunk Groups Dashboard controls Control Status Trunk Group Switch Port STG Description For each port in the Trunk Group, shows whether the port is down (red), up and forwarding (green) or in - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 44
LACP Dashboard To display the following form, select Layer 2 > LACP. Dashboard The following table describes the Switch LACP Dashboard controls: Table 22 LACP Dashboard controls Control Switch Port LACP Mode LACP Adminkey LACP Operkey LACP Selected Port Priority Attached Aggr Trunk Description - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 45
Dashboard LACP Port Dashboard To display the following form, go to the Switch LACP Dashboard. Select a port number. This form summarizes LACP port information. 45 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 46
Uplink Fast General Information To display the following form, select Layer 2 > Uplink Fast. Dashboard The following table describes the Uplink Fast Information controls: Table 23 Uplink Fast General Information controls Control STP Uplink Fast Mode STP Uplink Fast Rate Description Displays the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 47
Dashboard RMON History Group Information To display the following form, select RMON > History (click the underlined text, not the folder). This form displays information for all configured RMON History Groups. The following table describes the RMON History Group Dashboard controls: Table 24 RMON - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 48
Dashboard Table 24 RMON History Group Dashboard controls Control Owner Description Displays a text string that identifies the person or entity that created this History Group. RMON Alarm Group Information To display the following form, select RMON > Alarm (click the underlined text, not the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 49
Dashboard The following table describes the RMON Alarm Group Dashboard controls: Table 25 RMON Alarm Group Dashboard controls Control Description Search Range To search for a RMON Alarm Group, enter a range of numbers in the From and To fields. Search Options To focus the search for a RMON - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 50
Dashboard RMON Event Group Information To display the following form, select RMON > Event (click the underlined text, not the folder). This form displays information for all configured RMON Event Groups. The following table describes the RMON Event Group Dashboard controls: Table 26 RMON Event - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 51
Dashboard IP Interfaces Dashboard To display the following form, select Layer 3 > IP Interfaces (click the underlined text, not the folder). The following table describes the IP Interfaces Dashboard controls: Table 27 IP Interfaces Dashboard controls Control Search Range Search Options Status IP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 52
Dashboard Table 27 IP Interfaces Dashboard controls Control VLAN ID Description Displays the VLAN number for this interface. Each interface can belong to one VLAN, although any VLAN can have multiple IP interfaces in it. Route Table Information To display the following form, select Layer 3 > - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 53
Dashboard The following table describes the Route Table Information controls: Table 28 Route Table Information controls Control Search Operation Entry # Destination Mask Gateway Type Tag Metric IF Description To focus the search for an IP static route, enter search parameters: • Route Type • - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 54
Dashboard The following table describes the Route Table Tag parameter. Table 30 IP Routing Tag information Field fixed static addr rip ospf broadcast multicast martian Description The address belongs to a host or subnet attached to the switch. The address is a static route which has been - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 55
Dashboard The ARP information includes IP address and MAC address of each entry, address status flags, VLAN, and port for the address, and port referencing information. The following table describes the ARP Cache Information controls: Table 31 ARP Cache Information controls Control Show Entries of - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 56
Dashboard Network Filters Dashboard To display the following form, select Layer 3 > Network Filters (click the underlined text, not the folder). The following table describes the Network Filters Dashboard controls: Table 33 Network Filters Dashboard controls Control Description Entry Displays - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 57
Dashboard Route Map Dashboard To display the following form, select Layer 3 > Route Maps (click the underlined text, not the folder). The following table describes the Route Map Dashboard controls: Table 34 Route Map Dashboard controls Control Route Map ID Precedence Type Metric Enabled? - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 58
Dashboard Route Map Dashboard To display the following form, select Layer 3 > Route Maps (click the underlined text, not the folder). The following table describes the Route Map Dashboard controls: Table 35 Route Map Dashboard controls Control Description Route Map Identifier Numeric identifier - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 59
Dashboard Table 35 Route Map Dashboard controls Control Description Network Filter Action Action associated with the network filter for the access list: permit or deny Enable/Disable Access List Status of the access list: enabled or disabled. Default Gateways Dashboard To display the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 60
Table 36 Default Gateways Dashboard controls Control Description Default Gateway ID Displays the numeric identifier of the Default Gateway. IP Address Displays the IP Address of the Default Gateway. Dashboard IGMP Snooping Dashboard To display the following form, select Layer 3 > IGMP > IGMP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 61
Dashboard IGMP Multicast Groups The following table describes the IGMP Multicast Groups information. Table 37 IGMP Multicast Groups information Field Group VLAN Version Ports Expires Fwd Description Displays the IP address of the IGMP Multicast Group. Displays the VLAN number of the IGMP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 62
Dashboard IGMP Filters Dashboard To display the following form, select Layer 3 > IGMP > IGMP Filters (click the underlined text, not the folder). The following table describes the IGMP Filter information. Table 39 IGMP Filters information Field Filter ID Enabled? Action Range Description Displays - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 63
Dashboard IGMP Static Multicast Router Configuration To display the following form, select Layer 3 > IGMP > IGMP Static Mrouter (click the underlined text, not the folder). The following table describes the IGMP Static multicast router (Mrouter) information. Table 40 IGMP Static Multicast Router - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 64
OSPF General Dashboard To display the following form, select Layer 3 > OSPF > General. Dashboard This form summarizes general OSPF information. 64 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 65
Dashboard OSPF Areas Dashboard To display the following form, select Layer 3 > OSPF > OSPF Areas (click the underlined text, not the folder). Select an area number to view statistics for the OSPF area. OSPF Summary Ranges Dashboard To display the following form, select Layer 3 > OSPF > Summary - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 66
Table 41 OSPF Summary Ranges Dashboard controls Control Summary Address List Description Displays the summary address list for the range. Dashboard OSPF IP Interfaces Dashboard To display the following form, select Layer 3 > OSPF > OSPF Interfaces (click the underlined text, not the folder). - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 67
Dashboard OSPF Virtual Links Dashboard To display the following form, select Layer 3 > OSPF > Virtual Links (click the underlined text, not the folder). The following table describes the OSPF Virtual Links Dashboard controls: Table 43 OSPF Virtual Links Dashboard controls Control Virtual Link - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 68
Dashboard OSPF Routes To display the following form, select Layer 3 > OSPF > Routes (click the underlined text, not the folder). This form summarizes OSPF route information. RIP General Information To display the following form, select Layer 3 > RIP > General. The following table describes the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 69
Dashboard RIP Interfaces Dashboard To display the following form, select Layer 3 > RIP > RIP Interfaces (click the underlined text, not the folder). The following table describes the RIP Interfaces Dashboard controls: Table 45 RIP Interfaces Dashboard controls Control Search Range Search Options - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 70
into backup mode. This is generally used for passing master control back to a preferred switch once the preferred switch has been returned to service after a failure. When this command is executed, the current master gives up control and initiates a new election by temporarily advertising its own - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 71
Dashboard Virtual Routers Dashboard To display the following form, select Layer 3 > VRRP > Virtual Routers (click the underlined text, not the folder). The following table describes the Virtual Routers Dashboard controls: Table 47 Virtual Routers Dashboard controls Control Search Operation Status - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 72
into backup mode. This is generally used for passing master control back to a preferred switch once the preferred switch has been returned to service after a failure. When this command is executed, the current master gives up control and initiates a new election by temporarily advertising its own - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 73
Bootstrap Protocol Relay Dashboard To display the following form, select Layer 3 > Bootstrap Protocol Relay. Dashboard This form summarizes BOOTP information. IP Routing Dashboard To display the following form, select Layer 3 > General. This form summarizes IP Routing information. 73 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 74
To display the following form, select QoS > 802.1p > Priority - CoS. Dashboard This form shows the mapping between 802.1p Priority and Class of Service queue assignment. 802.1p CoS Weight Dashboard To display the following form, select QoS > 802.1p > CoS - Weight. This form shows the scheduling - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 75
Table Dashboard To display the following form, select QoS > 802.1p > Ports Priority Table. This form shows the 802.1p priority value, Class of Service queue assignment, and scheduling weight for each switch port. 802.1p Number of CoS Dashboard To display the following form, select QoS > 802.1p - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 76
Dashboard ACL Dashboard To display the following form, select Access Control > Access Control Lists (click the underlined text, not the folder). This form summarizes information for configured Access Control Lists (ACLs). 76 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 77
Dashboard Access Control List Dashboard To display the following form, go to the Access Control Lists form. Select an ACL number. This form shows the configured parameters for the ACL. ACL Groups Dashboard Table To display the following form, select Access Control > Access Control List Groups (click - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 78
Dashboard Access Control List Group Dashboard To display the following form, go to the Access Control List Groups form. Select an ACL Group number. This form shows the ACLs that reside within the selected ACL Group. Uplink Failure Detection Dashboard To display the following form, select Uplink - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 79
Dashboard Table 49 Uplink Failure Detection Dashboard controls Control LtD status LtM Ports LtD Ports Description Displays the current status of the Link to Disable (LtD). Displays the link status and Spanning Tree information for each port in the LtM. Displays the link status for each port in - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 80
statistics forms. The following provides a basic outline for viewing statistics. You should first be familiar with configuration as covered in the HP 1:10Gb Ethernet BL-c Switch Command Reference. Steps for displaying statistics Follow these basic steps for viewing switch statistics. 1. Select the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 81
3. View the statistics in the forms window. For example: Viewing statistics NOTE: Items that load other forms when selected are underlined. 4. Select an underlined item to view details on a per port basis. For example: NOTE: This page is refreshed every 5 seconds. 81 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 82
Management Processor Statistics To display the following form, select System > General. Viewing statistics This form displays a summary of management processor (MP) statistics. MP statistics are described in the following table: Table 50 Management Processor Statistics Statistic IF Stats IP Stats - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 83
Viewing statistics TCP/IP Statistics (IF and IP Statistics) To display the following form, go to the Management Processor Statistics form. Select one of the following: IF Stats, IP Stats, ICMP Stats, or TCP Stats. The following table describes the interface statistics: Table 51 IF statistics - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 84
protocol. For character-oriented or fixed-length interfaces which support protocol multiplexing the number of transmission units received via error. ipInDiscards The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 85
Viewing statistics Table 52 IP Statistics Statistic ipOutDiscards ipInHdrErrors ipInAddrErrors Description The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (for example, for lack of buffer space). - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 86
-specific errors (bad ICMP checksums, bad length, and so forth). The number of ICMP messages which this entity (the switch) did not send due to problems discovered within ICMP such as a lack of buffer. This value should not include errors discovered outside the ICMP layer such as the inability of IP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 87
value used for retransmitting unacknowledged octets. tcpMaxConn The limit on the total number of TCP connections the entity (the switch) can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. tcpRtoMin The minimum value permitted - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 88
Table 54 TCP Statistics Statistic Remote Port Source Address Local Port State Description TCP port used by the remote device. IP address of TCP source connections. Available TCP ports used for connecting to the switch. State of each TCP connection. Viewing statistics UDP/SNMP Statistics To - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 89
snmpOutGetRequests snmpInNoSuchNames snmpOutNoSuchNames snmpInGetNexts snmpOutGetNexts snmpInBadValues Description The total number of Messages delivered to the SNMP entity from the transport service. The total number of SNMP Messages that were passed from the SNMP protocol entity to the transport - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 90
Viewing statistics Table 56 SNMP Statistics Statistic snmpOutBadValues snmpInSetRequests snmpOutSetRequests snmpInReadOnlys snmpOutReadOnlys snmpInGetResponses snmpOutGetResponses snmpInGenErrs snmpOutGenErrs snmpInTraps snmpOutTraps snmpInBadVersions snmpInTotalReqVars snmpInBadCtyNames - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 91
Viewing statistics Table 56 SNMP Statistics Statistic snmpInASNParseErrs snmpInBadTypes Description The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding SNMP Messages received. NOTE: OSI's method of specifying abstract objects is called ASN.1 (Abstract - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 92
Viewing statistics FDB Statistics To display the following form, go to the Management Processor Statistics form. Select FDB Stats. Forwarding Database (FDB) statistics are described in the following table: Table 58 Forwarding Database Statistics Statistic current hiwat Description Current number - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 93
Network Time Protocol Statistics To display the following form, select System > NTP. Viewing statistics Network Time Protocol (NTP) statistics for the primary and secondary NTP servers are described in the following table: Table 59 NTP Statistics Statistic Request Sent Responses Received Updates - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 94
Viewing statistics Switch Ports Statistics Summary To display the following form, select Switch Ports (click the underlined text, not the folder). This form displays traffic statistics on a port-by-port basis. For more information, select a port number to display detailed statistics for that port. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 95
Viewing statistics Port Statistics To display the following form, go to the Switch Ports Statistics Summary form. Select a Switch Port number. 95 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 96
unpleasant performance effects on the sub network). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent. PortForward Transitions The number of times this port has transitioned from the Learning state to the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 97
Viewing statistics Table 62 Interface Statistics for a Port - Input Statistic HC BcastPkts HC MCastPkts Discards Errors Description The number of packets, delivered by this sub layer to a higher sub layer, which were addressed to a broadcast address at this sub layer. The total number of packets - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 98
Sequence (FCS) check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the Logical Link Control (LLC) (or other MAC user). Received frames for which multiple error conditions obtained are, according to the conventions - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 99
object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which (the switch). The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 100
Switch Ports 802.1x Statistics To display the following form, select Layer 2 > 802.1x > Switch Ports. Viewing statistics The following table describes 802.1x port statistics: Table 66 Switch Port 802.1x Statistics Statistic Port Last EAPOL Frame Source Frame Version Description Displays port - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 101
Viewing statistics Port 802.1x Statistics To display the following form, go to the Switch Ports 802.1x Statistics form. Select a port number. 101 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 102
Viewing statistics The following table describes 802.1x port statistics: Table 67 Switch Port 802.1x Statistics Statistic Description Authenticator Diagnostics authEntersConnecting Total number of times that the state machine transitions to the CONNECTING state from any other state. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 103
Viewing statistics Table 67 Switch Port 802.1x Statistics Statistic Description backendOtherRequestsToSupplicant Total number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure, or Success message) to the Supplicant. Indicates that the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 104
LACP Statistics To display the following form, select Layer 2 > LACP. Viewing statistics Enter a port number to show LACP Statistics for the port. The following table describes LACP statistics: Table 69 LACP Statistics Statistic Port Show Valid LACPDUs received Valid Marker PDUs received Valid - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 105
statistics NOTE: Currently, LACP implementation does not support the Churn machine, an option used to detect their IP options, and so forth. The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 106
Viewing statistics Table 70 IP Statistics Statistic ipOutRequests ipDefaultTTL Description The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 107
result of fragmentation at this entity (the switch). The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack of routes ever recorded in the route table. The maximum number of supported routes. 107 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 108
the ARP table. The highest number of ARP entries ever recorded in the ARP table. The maximum number of ARP entries that are supported. IP Routing Management Statistics (part 2) To display the following form, select Layer 3 > Network Routes (click the underlined text, not the folder). The following - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 109
to send. Note that this counter includes all those counted by icmpOutErrors. The number of ICMP messages that this switch did not send due to problems discovered within ICMP such as a lack of buffer. This value should not include errors discovered outside the ICMP layer such as the inability of IP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 110
type has the semantics of the UBOUND quantity described in RFC 793. tcpMaxConn The limit on the total number of TCP connections the switch can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. tcpActiveOpens The number of times TCP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 111
Viewing statistics The following table describes the User Datagram Protocol (UDP) statistics: Table 77 UDP statistics Statistics udpInDatagrams udpOutDatagrams udpInErrors udpNoPorts Description The total number of UDP datagrams delivered to the switch. The total number of UDP datagrams sent from - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 112
Viewing statistics IGMP VLAN Snooping Statistics Summary To display the following form, select Layer 3 > IGMP > IGMP Snooping (click the underlined text, not the folder). The following table describes IGMP VLAN Snooping statistics: Table 79 IGMP VLAN Snooping Statistics Summary Statistic Clear - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 113
Viewing statistics VLAN - IGMP Snooping Statistics To display the following form, go to the IGMP VLAN Snooping Statistics Summary form. Select a VLAN number. The following table describes IGMP VLAN Snooping statistics for the selected VLAN: Table 80 VLAN - Snooping Statistics Statistic Clear IGMP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 114
Viewing statistics Table 80 VLAN - Snooping Statistics Statistic Description rxIgmpV3CurrentState Records Total number of Current State records received rxIgmpV3SourceListChange Total number of Source List Change records received Records rxIgmpV3FilterChange Records Total number of Filter - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 115
OSPF General Statistics To display the following form, select Layer 3 > OSPF > General. Viewing statistics 115 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 116
Viewing statistics The following table describes OSPF General statistics: Table 81 OSPF General Statistics Statistic Description OSPF Rx/Tx Statistics Rx Statistics pkts The sum total of all OSPF packets received on all OSPF areas and interfaces. hello The sum total of all Hello packets - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 117
Viewing statistics Table 81 OSPF General Statistics Statistic exchange done bad requests bad sequence loading done n1way rst_ad down OSPF Interface Change Statistics hello down loop unloop wait timer backup nbr change Description The sum total number of neighbors in this state (that is, in an - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 118
Viewing statistics OSPF Areas Statistics To display the following form, select Layer 3 > OSPF > OSPF Areas (click the underlined text, not the folder). Select an area number to view detailed statistics. 118 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 119
Viewing statistics OSPF Area Statistics To display the following form, go to the OSPF Areas Statistics form. Select an area number. 119 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 120
Viewing statistics The following table describes OSPF Area statistics: Table 82 OSPF Area Statistics Statistic Description OSPF Rx/Tx Statistics Rx Statistics pkts The sum total of all OSPF packets received on all OSPF areas and interfaces. hello The sum total of all Hello packets received - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 121
Viewing statistics Table 82 OSPF Area Statistics Statistic exchange done bad requests bad sequence loading done n1way rst_ad down OSPF Interface Change Statistics hello down loop unloop wait timer backup nbr change Description The sum total number of neighbors in this state (that is, in an - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 122
Viewing statistics OSPF IP Interfaces Statistics To display the following form, select Layer 3 > OSPF > OSPF Interfaces (click the underlined text, not the folder). The following table describes the OSPF IP Interfaces Statistics controls: Table 83 OSPF IP Interface statistics Control Search - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 123
Viewing statistics OSPF IP Interface Statistics To display the following form, go to the OSPF IP Interfaces Statistics form. Select an interface ID number. 123 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 124
Viewing statistics The following table describes OSPF interface statistics: Table 84 OSPF Interface Statistics Statistic Description OSPF Rx/Tx Statistics Rx Statistics Pkts The sum total of all OSPF packets received on all OSPF areas and interfaces. hello The sum total of all Hello packets - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 125
Viewing statistics Table 84 OSPF Interface Statistics Statistic exchange done bad requests bad sequence loading done n1way rst_ad down OSPF Interface Change Statistics hello down loop unloop wait timer backup nbr change Description The sum total number of neighbors in this state (that is, in an - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 126
RIP Statistics To display the following form, select Layer 3 > RIP > General. Viewing statistics This form provides basic Routing Information Protocol (RIP) statistics. Virtual Router Redundancy Protocol Statistics To display the following form, select Layer 3 > VRRP > General. 126 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 127
Viewing statistics The following table describes VRRP statistics: Table 85 Virtual Router Redundancy Protocol Statistics Statistic InAdvertisements BadAdvertisements OutAdvertisements BadVersion BadVrid BadAddress BadData BadPassword BadInterval Description The total number of VRRP advertisements - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 128
Viewing statistics IP Routing Management Statistics (part one) To display the following form, select Layer 3 > Network Routes. 128 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 129
result of fragmentation at this entity (the switch). The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack of routes ever recorded in the route table. The maximum number of supported routes. 129 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 130
the ARP table. The highest number of ARP entries ever recorded in the ARP table. The maximum number of ARP entries that are supported. IP Routing Management Statistics (part 2) To display the following form, select Layer 3 > Network Routes (click the underlined text, not the folder). The following - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 131
to send. Note that this counter includes all those counted by icmpOutErrors. The number of ICMP messages that this switch did not send due to problems discovered within ICMP such as a lack of buffer. This value should not include errors discovered outside the ICMP layer such as the inability of IP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 132
type has the semantics of the UBOUND quantity described in RFC 793. tcpMaxConn The limit on the total number of TCP connections the switch can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. tcpActiveOpens The number of times TCP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 133
Viewing statistics The following table describes the User Datagram Protocol (UDP) statistics: Table 93 UDP statistics Statistics udpInDatagrams udpOutDatagrams udpInErrors udpNoPorts Description The total number of UDP datagrams delivered to the switch. The total number of UDP datagrams sent from - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 134
Viewing statistics ACL Statistics To display the following form, go to the ACL Statistics Table, and select an ACL number. This form summarizes the number of matches (hits) for the ACL. Uplink Failure Detection Statistics To display the following form, select Uplink Failure Detection (click the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 135
Viewing statistics The following table describes commands for Uplink Failure Detection (UFD) statistics: Table 94 Uplink Failure Detection Statistics Control Clear UFD Statistics Number of times LtM link failure Number of times LtM link in Blocking State Number of times LtD got auto disabled - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 136
the BBI configuration forms. The following provides a basic outline for switch configuration. You should first be familiar with configuration as covered in the HP 1:10Gb Ethernet BL-c Switch Command Reference. IMPORTANT: You must be logged in using the administrator account in order to change switch - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 137
Configuring the switch 3. View or make changes to the settings shown in the forms window. For example: NOTE: Some fields are highlighted on the forms in green type - they must be configured for proper switch operations. Underlined items load other forms when selected. 4. Submit the form contents - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 138
Configuring the switch Applied changes take effect on the switch immediately, but are lost the next time the switch is rebooted, unless the Save command is selected. When you click Save, you have two save options: Save and Save n. With Save, your new configuration changes are placed in the active - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 139
Configuring the switch Switch Management Processor Configuration Basic system configuration To display the following form, select System > General. 139 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 140
Configuring the switch The following table describes the Switch Management Processor Configuration (basic) controls: Table 95 Switch Management Processor Configuration (Basic) controls Control Switch IP Address Switch IP Subnet Mask Enable/Disable BOOTP for IP Management Enable/Disable DHCP for - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 141
Configuring the switch Table 95 Switch Management Processor Configuration (Basic) controls Control Timezone Location Daylight Savings Time Description Configures the time zone where the switch resides. You are prompted to select your location (continent, country, region) by the timezone wizard. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 142
Configuring the switch The following table describes the Switch Management Processor Configuration (SNMP) controls: Table 96 Switch Management Processor Configuration (SNMP) controls Control Description SNMP System Name Configures the name for the system. The name can have a maximum of 32 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 143
User Configuration Table To display the following form, select System > User Table. Configuring the switch This form summarizes the users configured on the switch. Click Add User to define a new user. Click Change User/Oper/Admin password to configure new passwords for the switch. To remove an end - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 144
user password (0-128 chars) Re-type user password (0-128 chars) User Status Description Sets a numeric identifier for the user. Sets the Class-of-Service to define the user's authority level. Defines the user name of maximum eight characters. Sets the user password of up to 128 characters maximum - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 145
Switch RADIUS Configuration To display the following form, select System > Radius. Configuring the switch The following table describes Switch Radius Configuration controls: Table 99 Switch RADIUS Configuration controls Control Description Primary Radius IP Address Configures the primary - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 146
Configuring the switch Table 99 Switch RADIUS Configuration controls Control Radius Secret Secondary Radius Server Secret Description Defines the shared secret (up to 32 characters) between the switch and the RADIUS server(s). Defines the secondary shared secret (up to 32 characters) between the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 147
password to an authentication server to determine whether access can be allowed to a given system. TACACS+ and Remote Authentication Dial-In User Service (RADIUS) protocols are more secure than the TACACS encryption protocol. TACACS+ is described in RFC 1492. TACACS+ protocol is more reliable than - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 148
. • It supports full-packet encryption, as opposed to password-only in authentication requests. • It supports decoupled authentication, server. Tacacs+ User Mappings Configuration Maps a TACACS+ privilege level to a HP 1:10GbE switch user level, as follows: Remote Privilege-Enter a TACACS+ - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 149
controls: Table 101 NTP Configuration controls Control NTP Server IP Address Secondary NTP Server IP Address Resync Interval (1-44640) Enable/Disable NTP Service Description Configures the IP address of the primary NTP server to which you want to synchronize the switch clock. Configures the IP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 150
Configuring the switch Syslog and Trap Feature Configuration To display the following form, select System > Syslog/Trap Features. The following table describes Syslog and Trap Feature Configuration controls: Table 102 Syslog and Trap Feature Configuration controls Control Enable/Disable Syslog and - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 151
Configuring the switch Table 102 Syslog and Trap Feature Configuration controls Control Enable/Disable Syslog and Trap of VLAN Enable/Disable Syslog and Trap of WEB Enable/Disable Syslog and Trap of IP Enable/Disable Syslog and Trap of VRRP Enable/Disable Syslog and Trap of SSH Enable/Disable - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 152
Configuring the switch Switch Image and Configuration Management To display the following form, select System > Config/Image Control. 152 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 153
Configuring the switch The switch software image is the executable code running on the switch. A version of the image ships with the switch, and comes pre-installed on the device. As new versions of the image are released, you can upgrade the software running on your switch. Upgrading the software - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 154
you want to download. Selects the file name and location of the Configuration Block file to be downloaded. Selects the filename for the TS (tech support) dump that you want to upload to the TFTP server. Selects the filename for the core (PANIC) dump that you want to upload to the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 155
switch's active configuration to the script configuration file specified in Configuration Filename. The file is placed on the TFTP server. Uploads the TS (tech support) dump file to the TFTP server specified in TSTP TS Dump Filename. Uploads the core (PANIC) dump file to the TFTP server specified in - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 156
Configuring the switch Management Network Definition Configuration To display the following form, select System > Mgmt. The following table describes the Management Network Definition Configuration controls: Table 105 Management Network Definition Configuration controls Control Index Management - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 157
Configuring the switch Switch Ports Configuration To display the following form, select System > Switch Ports (click the underlined text, not the folder). This form summarizes the configuration of each port. Select a switch port number to go to its configuration form. 157 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 158
Configuring the switch Switch Port Configuration To display the following form, go to the Switch Ports Configuration form. Select a Switch Port number. This form allows you to configure settings for individual switch ports. The following table describes the Switch Port Configuration controls: Table - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 159
Configuring the switch Table 106 Switch Port Configuration controls Control PVID Tagging Port STP Default Port VLAN ID (1-4095) Flow Control Autonegotiation Speed Duplex mode Enable/Disable sending Link UP/Down Trap Port Name Multicast Threshold Multicast Threshold Rate (0-262143) Description - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 160
Configuring the switch Table 106 Switch Port Configuration controls Control Broadcast Threshold Broadcast Threshold Rate (0-262143) Destination Look Up Fail Threshold Destination Lookup Fail Threshold Rate (0-262143) 802.1p Port Priority (0-7) Description Enables or disables broadcast threshold - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 161
Configuring the switch Switch Port ACL Configuration To display the following form, go to the Switch Ports Configuration form. Select a Switch Port number. This form allows you to configure Access Control List settings for individual switch ports. The following table describes the Switch Port ACL - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 162
folder). This form is used to configure, enable, and disable the Monitoring Port. When enabled, network packets being sent and/or received on a target port are duplicated and sent to a monitor port. By attaching a network analyzer to the monitor port, you can collect detailed information about your - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 163
Configuring the switch Monitoring Port Configuration To display the following form, go to the Port-Based Port Mirroring Configuration form. Select a Monitoring Port number. This form lists all mirrored ports for the selected port number. Click Add Mirrored Port to select a port to be monitored by - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 164
802.1x General Configuration To display the following form, select Layer 2 > 802.1x > General. Configuring the switch The following table describes the General 802.1x Configuration controls: Table 110 General 802.1x Configuration controls Control System Status Description Enables or disables 802 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 165
Configuring the switch 802.1x Port Configuration To display the following form, go to the Switch Ports 802.1x Configuration form. Select a port number. The following table describes the Port 802.1x Configuration controls: Table 111 Port 802.1x Configuration controls Control Description Auth Mode - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 166
Configuring the switch Table 111 Port 802.1x Configuration controls Control Server Timeout (0-65535 sec) ReAuth Status ReAuth Period (1-604800 sec) Overwrite Configuration with Description Sets the time, in seconds, the authenticator waits for a response from the Radius server before declaring an - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 167
Configuring the switch Static FDB Configuration (part one) To display the following form, select Layer 2 > FDB >Static FDB (click the underlined text, not the folder). This form summarizes the Static Forwarding Database entries. Select a static FDB ID number to display the Static FDB Configuration - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 168
Configuring the switch Table 113 Static FDB Configuration controls Control Vlan Port Description Configures the VLAN for the static FDB entry. Configures the port for the static FDB entry. VLANs Configuration To display the following form, select Layer 2 > Virtual LANs (click the underlined text - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 169
port membership of the VLAN. By default, the VLAN menu option is disabled except VLAN 1, which is enabled all the time. The HP 1:10GbE switch supports a maximum of 1,000 VLANs. VLAN 4095 is reserved for switch management. The following table describes the VLAN Configuration controls: Table 115 VLAN - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 170
Configuring the switch Table 115 VLAN Configuration controls Control Spanning Tree Group Ports Available Ports in Vlan Description Assigns a VLAN to a Spanning Tree Group. The range is 1-127. If MSTP is used, the range is 0-32 (0 = CIST). Lists the ports that can be added to the VLAN. Lists the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 171
Configuring the switch The HP 1:10GbE switch supports the IEEE 802.1d Spanning Tree Protocol (STP) and Per VLAN Spanning Tree (PVST+). You can configure up to 127 Spanning Tree Groups on the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 172
Configuring the switch Switch Spanning Tree Group Configuration To display the following form, go to the Switch Spanning Tree Groups Configuration form. Select a Spanning Tree Group number, or open the Spanning Tree Groups folder and click Add Spanning Tree Group. Spanning Tree bridge parameters - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 173
Configuring the switch Table 117 Switch Spanning Tree Group Configuration controls Control Description Bridge Priority (0-65535) Configures the bridge priority. The bridge priority parameter controls which bridge on the network is the STP root bridge. To make this switch the root bridge, - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 174
Configuring the switch Switch Spanning Tree Group Port Configuration To display the following form, go to the Switch Spanning Tree Group Configuration form. Select a Switch Port number. Spanning Tree port parameters are used to modify STP operation on an individual port basis. By default for STP/ - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 175
. Enables or disables STP on the port. MSTP/RSTP General Configuration To display the following form, select Layer 2 > MSTP/RSTP > General. The switch supports the IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP). MSTP allows you to map many - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 176
/RSTP (with mode set to either 'mstp' or 'rstp') is NOT interoperable with Cisco Rapid PVST+. The following configurations are supported: • HP PVST+ (default Spanning Tree setting) is interoperable with Cisco PVST+. • HP MSTP/RSTP (with mode set to 'mstp') is interoperable with Cisco MST/RSTP. 176 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 177
Configuring the switch Common Internal Spanning Tree Bridge Configuration To display the following form, select Layer 2 > MSTP/RSTP > CIST-Bridge. The CIST provides compatibility with different MSTP regions and with devices running different Spanning Tree instances. It is equivalent to Spanning - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 178
Configuring the switch Table 120 Common Internal Spanning Tree Bridge Configuration controls Control Forward Delay (4-30 secs) VLANs Available Cist VLANs Description Configures the CIST bridge forward delay parameter. The forward delay parameter specifies the amount of time that a bridge port has - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 179
Configuring the switch Common Internal Spanning Tree Port Configuration To display the following form, go to the Ports Common Internal Spanning Tree Configuration form. Select a CIST Port number. This form summarizes the port CIST parameters. Common Internal Spanning Tree port parameters are used - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 180
Configuring the switch Table 121 Common Internal Spanning Tree Port Configuration controls Control Hello Time (1-10 secs) Description Configures how often "keep alive" BPDU messages are transmitted. Trunk Groups Configuration To display the following form, select Layer 2 > Trunk Groups. This - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 181
Configuring the switch Switch Trunk Group Configuration To display the following form, go to the Trunk Groups Configuration form. Select a Trunk Group number. This form enables you to configure a selected switch trunk group. Trunk groups can provide super-bandwidth connections between switches or - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 182
Trunk Hash Configuration To display the following form, select Layer 2 > Trunk Hash. Configuring the switch The following table describes the Layer 2 Trunk Hash Configuration controls: Table 123 Layer 2 Trunk Hash Configuration controls Control Smac Dmac Sip Dip Description Enable or disable - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 183
the timeout period before invalidating LACP data from a remote partner. Choose short (3 seconds) or long (90 seconds). The default value is long. NOTE: HP recommends that you use a timeout value of long, to reduce LACPDU processing. If your switch's CPU utilization rate remains at 100% for periods - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 184
. Default is 128. Set the LACP mode for this port, as follows: • off: Turn LACP off for this port. You can use this port to manually configure a static trunk. The default value is off. • active: Turn LACP on and set this port to active. Active ports initiate LACPDUs. • passive: Turn LACP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 185
Uplink Fast General Configuration To display the following form, select Layer 2 > UpLink Fast. Configuring the switch The following table describes the Uplink Fast Configuration controls: Table 126 Uplink Fast Configuration controls Control Enabled? Update Rate (10-200) Description Enables or - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 186
Configuring the switch RMON History Configuration Table To display the following form, select RMON > History (click the underlined text, not the folder). The following table describes the RMON History Groups Configuration controls: Table 127 RMON History Configuration controls Control Search Range - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 187
Configuring the switch RMON History Configuration To display the following form, go to the RMON History Groups Configuration form. Select a History Group, or open the History folder and click Add History Group. The following table describes the History Group Configuration controls: Table 128 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 188
Configuring the switch RMON Alarm Configuration Table To display the following form, select RMON > Alarm (click the underlined text, not the folder). 188 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 189
Configuring the switch The following table describes the Alarm Groups Configuration controls: Table 129 RMON Alarm Configuration controls Control Description Search Range To search for a RMON Alarm, enter a range of numbers in the From and To fields. Search Options To focus the search for a - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 190
Configuring the switch The following table describes the Alarm Group Configuration controls: Table 130 Alarm Group Configuration controls Control Alarm Group ID MIB Object ID Rising Limit Falling Limit Rising Event Index Falling Event Index Alarm Type Sample Type Polling Interval Owner - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 191
Configuring the switch RMON Event Configuration Table To display the following form, select RMON > Event (click the underlined text, not the folder). The following table describes the Event Groups Configuration controls: Table 131 RMON Event Configuration controls Control Search Range Search - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 192
Configuring the switch RMON Event Configuration To display the following form, go to the RMON Event Groups Configuration form. Select an Event Group, or open the Event folder and click Add Event Group. The following table describes the Event Group Configuration controls: Table 132 Event Group - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 193
Configuring the switch IP Interfaces Configuration To display the following form, select Layer 3 > IP Interfaces (click the underlined text, not the folder). This form summarizes IP Interface parameters. The following table describes IP Interfaces Configuration controls: Table 133 IP Interfaces - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 194
Configuring the switch IP Interface Configuration To display the following form, go to the IP Interfaces Configuration form. Select an IP Interface number, or open the IP Interfaces folder and click Add IP Interface. The switch can be configured with up to 256 IP interfaces. Each IP interface - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 195
Configuring the switch IP Static Routes Configuration To display the following form, select Layer 3 > Network Routes (click the underlined text, not the folder). This form summarizes static route parameters. The following table describes IP Static Routes Configuration controls: Table 135 IP Static - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 196
Configuring the switch IP Static Route Configuration To display the following form, go to the IP Static Routes Configuration form. Select a static route ID number, or open the Network Routes folder and click Add Network Route. The following table describes the IP Static Route Configuration controls - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 197
Configuring the switch Static ARP Configuration To display the following form, select Layer 3 > ARP (click the underlined text, not the folder). This form summarizes the current static ARP entries. Select a static ARP ID number to display the IP Static ARP Configuration form. IP Static ARP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 198
Configuring the switch Table 137 IP Static ARP Configuration controls Control VLAN Port Description Configures the VLAN ID for the host. Configures the port to which the host connects. Network Filters Configuration To display the following form, select Layer 3 > Network Filters (click the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 199
Configuring the switch Network Filter Configuration To display the following form, go to the Network Filters Configuration form. Select a network filter ID number, or open the Network Filters folder and click Add Network Filter. The following table describes the Network Filter Configuration - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 200
Configuring the switch Route Maps Configuration To display the following form, select Layer 3 > Route Maps (click the underlined text, not the folder). The following table describes Route Maps Configuration controls: Table 140 Route Maps Configuration controls Control Search Operation Description - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 201
Configuring the switch Route Map Configuration To display the following form, go to the Route Maps Configuration form. Select a route map ID number, or open the Route Maps folder and click Add Route Map. The following table describes the Route Map Configuration controls: Table 141 Route Map - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 202
Configuring the switch Route Map Access List Configuration To display the following form, go to the Route Map Configuration form. Click Add Access List. The following table describes the Access List Configuration controls: Table 142 Access List Configuration controls Control Access List Identifier - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 203
Configuring the switch Default Gateways Configuration To display the following form, select IP Menu > Default Gateways (click the underlined text, not the folder). This form summarizes default gateway parameters. The following table describes the Default Gateways Configuration controls: Table 143 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 204
IP Address Enable/Disable Default Gateway Enable/Disable ARP only health checks Health Check Interval (0-60 sec) Retries before Out of Service (1-120) Description Selects a default Gateway to configure. Configures the IP address of the default IP gateway using dotted decimal notation. Enables - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 205
Configuring the switch IGMP Snooping Configuration To display the following form, select Layer 3 > IGMP > IGMP Snooping (click the underlined text, not the folder). Internet Group Management Protocol (IGMP) is used by IP Multicast routers to learn about the existence of host group members on their - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 206
Configuring the switch IGMP Snooping allows the switch to forward multicast traffic only to those ports that request it. IGMP Snooping prevents multicast traffic from being flooded to all ports. The switch learns which server hosts are interested in receiving multicast traffic, and forwards it only - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 207
Configuring the switch Table 145 IGMP Snooping Configuration controls Control Snooping VLANs with Fstleave Descriptions Enables or disables FastLeave processing. FastLeave allows the switch to immediately remove a port from the IGMP port list, if the host sends a Leave message, and the proper - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 208
Configuring the switch IGMP Filter Configuration To display the following form, go to the IGMP Filters Configuration form. Select a Filter ID, or open the IGMP Filters folder and click Add Filter. The following table describes the IGMP Filter Configuration controls: Table 146 IGMP Filter - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 209
Configuring the switch IGMP Filtering Port Configuration To display the following form, select Layer 3 > IGMP > Switch Ports. IGMP Filtering - Port Configuration To display the following form, go to the IGMP Filtering Port Configuration form. Select a Switch Port number. 209 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 210
Configuring the switch The following table describes IGMP Filtering - Port Configuration controls: Table 147 IGMP Filtering - Port Configuration controls Control Enable/Disable Filtering on Port IGMP Filters Available IGMP Filters Selected Description Enables or disables IGMP filtering on the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 211
Configuring the switch Static Multicast Router Configuration for Port To display the following form, go to the IGMP Static Multicast Router Configuration form. Select an Mrouter Port number, or open the IGMP Static Mrouter folder and click Add Mrouter. NOTE: When you configure a static multicast - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 212
Configuring the switch OSPF General Configuration To display the following form, select Layer 3 > OSPF Routing Protocol > General. The following table describes the OSPF General Configuration controls: Table 149 OSPF General Configuration controls Control Globally Enable OSPF? External LSDB Limit - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 213
Configuring the switch OSPF MD5 Key Configuration To display the following form, go to the OSPF General Configuration form. Click Add OSPF Mdkey. The following table describes the OSPF MD5 Key Configuration controls: Table 150 OSPF MD5 Key Configuration controls Control ID MD5 Key Descriptions - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 214
Configuring the switch OSPF Area Configuration To display the following form, go to the OSPF Areas Configuration form. Select an area number, or open the OSPF Areas folder and click Add OSPF Area. The following table describes the OSPF Area Configuration controls: Table 151 OSPF Area Configuration - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 215
Configuring the switch Table 151 OSPF Area Configuration controls Control Authentication Type? Descriptions Defines the authentication method, as follows: • None: No authentication required. • Password: Authenticates simple passwords so that only trusted routing devices can participate. • MD5: - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 216
Configuring the switch OSPF Summary Range Configuration To display the following form, go to the OSPF Summary Ranges Configuration form. Select a summary range number, or open the OSPF Summary Ranges folder and click Add Summary Range. The following table describes the OSPF Summary Range - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 217
Configuring the switch OSPF Interfaces Configuration To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Interfaces (click the underlined text, not the folder). This form provides a summary of the state of OSPF interfaces. The following table describes OSPF Interfaces - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 218
Configuring the switch OSPF Interface Configuration To display the following form, go to the OSPF Interfaces Configuration form. Select an interface number, or open the OSPF Interfaces folder and click Add OSPF Interface. The following table describes the OSPF Interface Configuration controls: - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 219
Configuring the switch Table 154 OSPF Interface Configuration controls Control Retransmit Interval (1-3600 sec) Authentication Key MD5 Key ID (1-255) Descriptions Displays the retransmit interval in seconds. Sets the authentication key to clear the password. Assigns an MD5 key to the interface. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 220
Configuring the switch OSPF Virtual Link Configuration To display the following form, go to the OSPF Virtual Links Configuration form. Select a virtual link number, or open the OSPF Virtual Links folder and click Add OSPF Virtual Link. The following table describes the OSPF Virtual Link - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 221
Configuring the switch OSPF Hosts Configuration To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Hosts (click the underlined text, not the folder). The following table describes OSPF Hosts Configuration controls: Table 156 OSPF Hosts Configuration controls Control - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 222
Configuring the switch OSPF Host Configuration To display the following form, go to the OSPF Hosts Configuration form. Select a host number, or open the OSPF Hosts folder and click Add OSPF Host. The following table describes the OSPF Host Configuration controls: Table 157 OSPF Host Configuration - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 223
Configuring the switch OSPF Route Redistribution Configuration To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Route Redistribution > Static Route Redistribution, Fixed Route Redistribution, or RIP Route Redistribution. The following table describes the OSPF Route - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 224
Configuring the switch RIP Interfaces Configuration To display the following form, select Layer 3 > Routing Information Protocol > Routing Information Protocol (click the underlined text, not the folder). RIP is used for configuring Routing Information Protocol parameters. This option is turned off - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 225
Configuring the switch RIP Interface Configuration To display the following form, go to the RIP Interfaces Configuration form. Select a RIP interface number, or open the RIP Interfaces folder and click Add RIP Interface. The following table describes the RIP Interface Configuration controls: Table - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 226
Configuring the switch Table 160 RIP Interface Configuration controls Control Poisoned Reverse? Triggered Updates? Multicast Updates? Split Horizon? RIP Metric (1-15) Authentication Type Authentication Key Descriptions When enabled, the switch uses split horizon with poisoned reverse. When - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 227
Configuring the switch The following table describes the RIP Route Redistribution Configuration controls: Table 161 RIP Route Redistribution Configuration controls Control Metric (1-15, 0 = none) Route Maps Available Out Route Map List Descriptions Exports the routes of this protocol in which the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 228
Configuring the switch Virtual Routers Configuration To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > Virtual Routers (click the underline text, not the folder). The following table describes Virtual Routers Configuration controls: Table 163 Virtual Routers - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 229
Configuring the switch Virtual Router Configuration To display the following form, go to the Virtual Routers Configuration form. Select a Virtual Router number or open the Virtual Routers folder and click Add Virtual Router. The following table describes the Virtual Router Configuration controls: - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 230
Configuring the switch Table 164 Virtual Router Configuration controls Control IP Interface (1-255) Enabled? Priority (1-254) Advertisement Interval (1-255) Owner Preemption? Track master virtual routers? Track other IP interfaces? Track VLAN switch ports? Descriptions Selects a switch IP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 231
Configuring the switch VRRP Interfaces Configuration To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > VRRP Interfaces (click the underline text, not the folder). The following table describes VRRP Interfaces Configuration controls: Table 165 VRRP Interfaces - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 232
Configuring the switch VRRP Interface Configuration To display the following form, go to the Virtual Routers Configuration form. Select a VRRP interface number or open the VRRP Interfaces folder and click Add Virtual router Interface. The following table describes the VRRP Interface Configuration - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 233
Configuring the switch VRRP General Configuration To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > General. The following table describes the VRRP General Configuration controls: Table 167 VRRP General Configuration controls Control Descriptions VRRP - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 234
Configuring the switch Table 167 VRRP General Configuration controls Control Descriptions Priority (1-254) Defines the election priority bias for this virtual router group. This can be any integer between 1 and 254. The default value is 100. During the master router election process, the - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 235
for defining the primary and secondary DNS servers on your local network, and for setting the default domain name served by the switch services. DNS parameters must be configured prior to using hostname parameters with the ping, traceroute, and tftp commands. The following table describes the Domain - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 236
Configuring the switch Bootstrap Protocol Relay Configuration To display the following form, select Layer 3 > Bootstrap Protocol Relay. The following table describes the Bootstrap Protocol Relay configuration controls: Table 169 Bootstrap Protocol Relay Configuration controls Control BOOTP Server - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 237
router ID. QoS Priority CoS Configuration To display the following form, select QoS > 802.1p > Priority - CoS. This form summarizes the QoS Priority - Class of Service parameters. Select a priority value to view the CoSQ For Priority form. 237 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 238
CoSQ For Priority Configuration controls Control CoSQ (0-1) Description Maps the 802.1p priority of to the Class of Service queue (CoSq) priority. Enter the Class of Service queue (0-1) that handles the matching traffic. QoS CoS Weight Configuration To display the following form, select QoS > 802 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 239
controls: Table 172 CoSQ Configuration controls Control CoSq Weight (0-15) Description Configures the scheduling weight of the selected Class of Service queue (CoSq). QoS Switch Ports Priority Configuration To display the following form, select QoS > 802.1p > Ports Priority Table. This - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 240
QoS switch port priority configuration controls: Table 174 QoS Switch Port Priority Configuration controls Control Number of CoS (2, 8) Description Sets the number of Class of Service queues for switch ports. The default value is 2. 240 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 241
Configuring the switch ACL Configuration To display the following form, select Access Control > Access Control Lists (click the underlined text, not the folder). This form allows you to search for Access Control Lists. The following table describes the ACL Configuration controls: 241 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 242
Configuring the switch Table 175 ACL Configuration controls Control Search Range Search Options Description To search for an ACL, enter a range of ACL ID numbers in the From and To fields. To focus the search for an ACL, enter optional search parameters: • Group ID • Switch Egress Port • Source - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 243
. Configures a filter action for packets that match the ACL definitions. You can choose to permit (pass) or deny (drop) packets, or set the Class of Service queue that handles the packets. Defines the Ethernet format for the ACL. 243 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 244
ID (1-4095) Defines a VLAN number and mask for this ACL. 802.1p Priority Defines the 802.1p priority for the ACL. Type of Service (0-255) Defines a Type of Service value for the ACL. For more information on ToS, see RFC 1340 and 1349. Protocol (0-255) Defines an IP protocol for the ACL - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 245
Configuring the switch Table 176 Access Control List Configuration controls Control Statistics Egress Port Description Enables or disables the statistics collection for the ACL. Selects an egress port to add to the ACL. The egress port ACL will not match a Layer 2 broadcast or multicast packet. - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 246
• User defined - Sets the 802.1p priority for In-Profile packets based on the configured value. • Use TOS precedence - Maps the TOS (Type of Service) priority to 802.1p priority for In-Profile packets. • Disabled - Disables 802.1p priority mapping for In-Profile packets. Set in profile user update - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 247
Configuring the switch ACL Groups Configuration To display the following form, select Access Control > Access Control Groups (click the underlined text, not the folder). The following table describes the ACL Groups Configuration controls: Table 179 ACL Groups Configuration controls Control Search - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 248
Configuring the switch Access Control Group Configuration To display the following form, go to the ACL Groups Configuration Table form, and select an ACL Group number. The following table describes the Access Control List Group configuration controls: Table 180 ACL Group Configuration controls - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 249
Configuration To display the following form, select Uplink Failure Detection (click the underlined text, not the folder). Uplink Failure Detection (UFD) supports network fault tolerance in network adapter teams. Use this menu to configure a Failure Detection Pair of one Links to Monitor (LtM) group - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 250
Configuring the switch Failure Detection Pair Configuration To display the following form, select Uplink Failure Detection (click the underlined text, not the folder). On the UFD Configuration form, select FDP. 250 - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 251
Configuring the switch The following table describes the Failure Detection Pair Configuration controls: Table 182 Failure Detection Pair Configuration controls Control Enable/Disable FDP LtM Ports Available LtM Ports Selected LtD Ports Available LtD Ports Selected LtM Trunks Available LtM Trunks - HP 438031-B21 | HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-b - Page 252
Configuring the switch Table 182 Failure Detection Pair Configuration controls Control LtD Admin Keys Selected Description Lists the ports whose LACP Admin keys are members of the LtD. Select a port in the LtD Admin Keys Available list and click Add to add the port's Admin key to the LtD. Select
HP 1:10Gb Ethernet BL-c Switch for c-Class
BladeSystem
Browser-based Interface Reference Guide
Part number: 445880-001
First edition: April 2007