HP 4510s Drives - Windows Vista

HP 4510s - ProBook - Celeron 1.8 GHz Manual

Get HP 4510s - ProBook - Celeron 1.8 GHz PDF manuals and user guides
UPC - 884962592144
View all HP 4510s manuals
Add to My Manuals
Save this manual to your list of manuals

HP 4510s manual content summary:

  • HP 4510s | Drives - Windows Vista - Page 1
    Drives User Guide
  • HP 4510s | Drives - Windows Vista - Page 2
    and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Third Edition: October 2009 First Edition: April 2009 Document Part Number: 516608-003 Product notice This user guide
  • HP 4510s | Drives - Windows Vista - Page 3
    ...14 4 Using HP 3D DriveGuard Identifying HP 3D DriveGuard status 16 Using HP 3D DriveGuard software ...17 5 Improving hard drive performance Using Disk Defragmenter ...18 Using Disk Cleanup ...18 6 Replacing the hard drive 7 Troubleshooting The optical disc tray does not open for removal of a CD
  • HP 4510s | Drives - Windows Vista - Page 4
    A disc does not play automatically ...38 The process of burning a disc does not begin, or it stops before completion 39 A device driver must be reinstalled ...40 Obtaining Microsoft device drivers 40 Obtaining HP device drivers 40 Using SoftPaq Download Manager 41 Index ...43 iv
  • HP 4510s | Drives - Windows Vista - Page 5
    be sure that the battery is sufficiently charged before writing to media. Avoid exposing a drive to temperature or humidity extremes. Avoid exposing a drive to liquids. Do not spray the drive with cleaning products. Remove media from a drive before removing the drive from the drive bay, or traveling
  • HP 4510s | Drives - Windows Vista - Page 6
    computer, including your optical drive. You may have one of the following types of drives: ● DVD-ROM Drive ● DVD+/-RW SuperMulti Double-Layer LightScribe Drive ● Blu-ray ROM DVD+/-RW SuperMulti Double-Layer LightScribe Drive NOTE: Some of the drives listed above may not be supported by your computer
  • HP 4510s | Drives - Windows Vista - Page 7
    DVD discs. If your optical drive is a Blu-ray Disc ROM drive, it can also read Blu-ray discs (BDs). NOTE: Some of the optical drives listed may not be supported by your computer. The listed drives are not necessarily all of the supported optical drives. Some optical drives can also write to optical
  • HP 4510s | Drives - Windows Vista - Page 8
    BDs) An optical drive supports optical discs (CDs, DVDs, and BDs). CDs, used to store digital data, are also used for commercial audio recordings and are convenient work files ● Making weekly backups of hard drive files ● Updating photos, video, audio, and data continuously DVD±R discs Use blank
  • HP 4510s | Drives - Windows Vista - Page 9
    Blu-ray Discs (BD) BD is a high-density optical disc format for the storage of digital information, including high-definition video. A single-layer Blu-ray Disc can store 25 GB, over 5 times the storage capacity of a single-layer DVD at 4.7 GB. A dual-layer Blu-ray Disc can store 50 GB, almost 6
  • HP 4510s | Drives - Windows Vista - Page 10
    CD, DVD, or BD 1. Turn on the computer. 2. Press the release button (1) on the drive bezel to release the disc tray. 3. Pull out the tray (2). 4. content. NOTE: For best results, be sure that your AC adapter is plugged into an external power source while playing a BD. 6 Chapter 2 Using an optical
  • HP 4510s | Drives - Windows Vista - Page 11
    available options for each media type listed. NOTE: Choose WinDVD to play DVDs. 4. Click Save. NOTE: For more information about AutoPlay, select Start > Help and Support. Configuring AutoPlay 7
  • HP 4510s | Drives - Windows Vista - Page 12
    select the fifth time becomes the permanent region setting on the DVD drive. The number of region changes remaining is displayed on the DVD Region tab. To Refer to Help and Support for more information. 3. Click the (+) sign next to DVD/CD-ROM drives. 4. Right-click the DVD drive for which you want
  • HP 4510s | Drives - Windows Vista - Page 13
    not copy directly from a source disc to a destination disc or from a network drive to a destination disc. Save the information to your hard drive, and then burn from your hard drive to the destination disc. Do not use the computer keyboard or move the computer while the computer is writing to a disc
  • HP 4510s | Drives - Windows Vista - Page 14
    . Creator Business reads the source disc and copies the data to a temporary folder on your hard drive. 5. When prompted, remove the source disc from the optical drive and insert a blank disc into the drive. After the information is copied, the disc you created is ejected automatically. 10 Chapter
  • HP 4510s | Drives - Windows Vista - Page 15
    or on computers with MP3 software installed. To burn a CD or DVD, follow these steps: 1. Download or copy the source files into a folder on your hard drive. 2. Insert a blank CD or DVD into the optical drive. 3. Select Start > All Programs, and then select the name of the software you want to use
  • HP 4510s | Drives - Windows Vista - Page 16
    , DVD, or BD 1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops. 2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the
  • HP 4510s | Drives - Windows Vista - Page 17
    be added by connecting the drive to a USB port on the computer or on an optional docking device (select models only). USB drives include the following types: ● 1.44-megabyte diskette drive ● Hard drive module (a hard drive with an adapter attached) ● DVD-ROM Drive ● DVD+/-RW SuperMulti Double-Layer
  • HP 4510s | Drives - Windows Vista - Page 18
    or to learn which computer port to use, refer to the manufacturer's instructions. To connect an external device to the computer: CAUTION: To reduce the risk of damage to the equipment when connecting a powered drive, be sure that the AC power cord is unplugged. 1. Connect the device to the computer
  • HP 4510s | Drives - Windows Vista - Page 19
    computer with the display closed while the computer is running on battery power. A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal operation. NOTE: Hard drives that are in an optional docking device or are connected to a USB port are not protected
  • HP 4510s | Drives - Windows Vista - Page 20
    is disabled, a red X is superimposed over the hard drive icon. ● If the drives are parked, a yellow moon is superimposed over the hard drive icon. NOTE: The icon in the Mobility Center may not show the most up-to-date status for the drive. For immediate updates after a change in status, you need to
  • HP 4510s | Drives - Windows Vista - Page 21
    . To open the software and change settings, follow these steps: 1. In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window. - or - Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard. 2. Click the appropriate button to change settings. 3. Click OK. Using
  • HP 4510s | Drives - Windows Vista - Page 22
    . Depending on the size of your hard drive and the number of fragmented files, Disk Defragmenter may take more than an hour to complete. You Support for more information. For additional information, access the Disk Defragmenter software Help. Using Disk Cleanup Disk Cleanup searches the hard drive
  • HP 4510s | Drives - Windows Vista - Page 23
    Replacing the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive the power button. Then shut down the computer through the operating system. To remove a hard drive: 1.
  • HP 4510s | Drives - Windows Vista - Page 24
    7. Remove the screws from the battery area. Your computer has 4, 5, or 7 screws that need to be removed. NOTE: Refer to the illustration that most closely matches your computer. 20 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 25
    8. Turn the computer display-side up, and then remove the 2 screw covers and screws from the back edge of the computer. 9. Open the computer as far as possible. limits will cause damage to the display. 10. Slide the switch cover straight back towards the display, and then remove the switch cover. 21
  • HP 4510s | Drives - Windows Vista - Page 26
    11. Remove the screws from the keyboard. Your computer has either 2 or 3 screws that need to be removed. NOTE: Refer to the illustration that most closely matches your computer. 22 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 27
    12. For 15- and 17-inch computers, slide the keyboard back toward the display (1), and then rotate it forward (2) to gain access to the keyboard cable connector. CAUTION: Do not rip the keyboard cable. For 14-inch computers, slide the keyboard back toward the display (1), and then rotate it to the
  • HP 4510s | Drives - Windows Vista - Page 28
    14. Remove the keyboard from the computer (3). For 15- and 17-inch computers. For 14-inch computers. 24 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 29
    15. Remove the screws from the top cover. Your computer has either 2 or 3 screws that need to be removed. NOTE: Refer to the illustration that most closely matches your computer. 25
  • HP 4510s | Drives - Windows Vista - Page 30
    the hard drive and WLAN compartment. 19. Remove the 2 hard drive screws (1) and loosen the captive screw (2) that secure the hard drive. 20. Use the Mylar tab (3) on the hard drive to slide the hard drive to the right to disconnect it from the system board. 26 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 31
    21. Lift the hard drive (4) out of the hard drive bay. To install a hard drive: 1. Insert the hard drive into the hard drive bay (1). 2. Use the Mylar tab (2) on the hard drive to slide the hard drive to the left to connect it to the system board. 3. Replace the 2 hard drive screws (3) and tighten
  • HP 4510s | Drives - Windows Vista - Page 32
    4. Place the top cover (1) on the computer, and then insert the TouchPad cable (2) into the ZIF connector (3) on the system board. 5. Slide the top cover into place. 28 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 33
    6. Replace the screws in the top cover. Your computer has either 2 or 3 screws that need to be installed. NOTE: Refer to the illustration that most closely matches your computer. 7. For 15- and 17-inch computers, place the keyboard upside down on the top cover of the computer (1). 29
  • HP 4510s | Drives - Windows Vista - Page 34
    connector (3) on the system board and secure the connector. 9. For 14-inch computers place the keyboard upside down on the right-side of the computer (1). 10. Insert the keyboard cable (2) into the ZIF connector (3) on the system board and secure the connector. 30 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 35
    11. Turn over the keyboard (1) into the keyboard tray, and then slide the keyboard (2) into place. NOTE: Refer to the illustration that most closely matches your computer. 31
  • HP 4510s | Drives - Windows Vista - Page 36
    12. Replace the screws on the keyboard. Your computer has either 2 or 3 screws that need to be replaced. NOTE: Refer to the illustration that most closely matches your computer. 13. Slide the switch cover into place. 14. Close the computer display. 32 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 37
    15. Replace the 2 screws and their covers on the back edge of the computer. 16. Replace the screws in the battery area. Your computer has 4, 5, or 7 screws that need to be replaced. NOTE: Refer to the illustration that most closely matches your computer. 33
  • HP 4510s | Drives - Windows Vista - Page 38
    17. Turn the computer upside down on a flat surface, and then replace the battery. 18. Reconnect external power and external devices. 19. Turn on the computer. 34 Chapter 6 Replacing the hard drive
  • HP 4510s | Drives - Windows Vista - Page 39
    7 Troubleshooting The following sections describe several common issues and resolutions. The optical disc tray does not open for removal of a CD, DVD, or BD 1. Insert the end of a paper clip (1) into the release access in the front bezel of the drive. 2. Press in gently on the paper clip until the
  • HP 4510s | Drives - Windows Vista - Page 40
    The computer does not detect the optical drive If the computer does not detect the optical drive, use Device Manager to troubleshoot the device and then update, uninstall, or disable the device driver: 1. Remove any discs from the optical drive. 2. Select Start > Control Panel > System and
  • HP 4510s | Drives - Windows Vista - Page 41
    the following ways: ◦ Playback may resume. - or - ◦ The playback window in the multimedia program may close. To return to playing the disc, click the Play button in your multimedia program to restart the disc. In rare cases, you may need to exit the program and then restart it. ● Increase system
  • HP 4510s | Drives - Windows Vista - Page 42
    all media and devices check box is selected. 3. Click Save. A CD, DVD, or BD should now start automatically when it is inserted into the optical drive. 38 Chapter 7 Troubleshooting
  • HP 4510s | Drives - Windows Vista - Page 43
    copying a disc, save the information on the source disc to your hard drive before trying to burn the contents to a new disc, and then burn from your hard drive. ● Reinstall the disc-burning device driver located in the DVD/CD-ROM drives category in Device Manager. The process of burning a disc does
  • HP 4510s | Drives - Windows Vista - Page 44
    and select a time for Microsoft Update to check for updates to the Windows operating system and other Microsoft products. 6. If prompted to do so, restart your computer. Obtaining HP device drivers Follow either of the following procedures to obtain HP device drivers. 40 Chapter 7 Troubleshooting
  • HP 4510s | Drives - Windows Vista - Page 45
    http://www.hp.com/support. 2. Select your country or region. 3. Click the option for software and driver downloads, and then type your computer model number in the product box. 4. Press enter, and then follow the on-screen instructions. Using SoftPaq Download Manager HP SoftPaq Download Manager (SDM
  • HP 4510s | Drives - Windows Vista - Page 46
    If you want to download only one or two SoftPaqs and have a high-speed Internet connection, click Download & Unpack. 6. Right-click Install SoftPaq in the SoftPaq Download Manager software to install the selected SoftPaqs on the computer. 42 Chapter 7 Troubleshooting
  • HP 4510s | Drives - Windows Vista - Page 47
    27 replacing 19 hard drive external 13 HP 3D DriveGuard 15 installing 27 replacing 19 HP 3D DriveGuard 15 K keyboard removing 23 S SoftPaqs, downloading 41 software Disk Cleanup 18 Disk Defragmenter 18 switch cover removing 21 T troubleshooting AutoPlay 38 burning discs 39 device drivers 40
  • HP 4510s | Drives - Windows Vista - Page 48
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Drives
User Guide