HP 5100 HP LaserJet 5100 Series - Printer Maintenance Kit - Page 14
Step 2 Replace the Tray 1 pickup roller, from the shaft.
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Step 2 Replace the Tray 1 pickup roller 1 Facing the front of the printer, lift the green center handle of the registration assembly. 2 Lift the locking tab (Figure 6, item 1) on the right side roller cam, and slide the cam to the right. 3 Slide the roller between the two cams, and then remove the roller from the shaft. Figure 6 Removing the Tray 1 pickup roller 4 Complete "Replace the Tray 1 separation pad" on page 13 before installing the new Tray 1 pickup roller. 12 Installing the printer maintenance kit ENWW
12
Installing the printer maintenance kit
ENWW
Step 2
Replace the Tray 1 pickup roller
1
Facing the front of the printer, lift the green center handle of the
registration assembly.
2
Lift the locking tab (Figure 6, item 1) on the right side roller cam,
and slide the cam to the right.
3
Slide the roller between the two cams, and then remove the roller
from the shaft.
Figure 6
Removing the Tray 1 pickup roller
4
Complete “Replace the Tray 1 separation pad” on page 13 before
installing the new Tray 1 pickup roller.