HP 5600 TFT5600 Rackmount Keyboard and Monitor (RKM) Installation Instructions

HP CONFIDENTIAL Writer: Amy L. Laffitte Codename:RUGER Part Number: 230201-022 Last Saved On: 9/3/02 3:33 PM

hp TFT5600

rackmount keyboard

and monitor

installation instructions

Read Instructions Completely

Before Beginning Installation Procedures

Hewlett-Packard Company shall not be liable for technical or editorial errors or

omissions contained herein. The information in this document is provided “as is”

without warranty of any kind and is subject to change without notice.

The warranties for HP products are set forth in the express limited warranty

statements accompanying such products. Nothing herein should be construed as

constituting an additional warranty.

Second Edition (September 2002)

Part Number 230201-022

230201- 022

About this Device

The TFT5600 Rackmount Keyboard and Monitor (RKM) is a

rack-mountable 1U integrated flat panel monitor, with a 15-inch

(38.1 cm) color active matrix Thin Film Transistor (TFT) Liquid

Crystal Display (LCD), and keyboard with hot keys and track ball.

NOTE:

1U= 1.75 inches or 44.45 cm

The TFT5600 RKM is mounted on rails with space to add the HP

1U switch box behind the unit. The TFT5600 RKM can be used

with all Compaq 9000 Series racks and HP 10000 Series racks.

Kit Contents

Below are the items and quantities required for assembly:

•

M-6 cage nuts (2)

•

M-6 screws (8)

•

6-32 screws (12)

•

Mounting rails with slide (2)

•

Cable management arm (1)

•

Brace (1)

•

TFT 5600 RKM (1)

•

Lock plate (2)

•

Rack template (1)

This kit may contain extra pieces of hardware for your

convenience.

Optional Equipment

•

Video Connector Adapter Option Kit (Part number

149361-B21)—The video connector adapter provides an

interface for video connectors that are missing pin 9.

Tools Required

•

Phillips screwdriver

•

T-15 Torx driver

Rack Considerations

Before beginning these procedures, make sure you understand and

follow these precautions:

WARNING:

To reduce the risk of personal injury or damage to

the equipment, be sure that:

•

The leveling jacks are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

The stabilizing feet are attached to the rack, if it is a

single-rack installation.

•

The racks are coupled in multiple-rack installations.

•

Only one component is extended at a time. A rack may

become unstable if more than one component is extended

for any reason.