HP 6005 Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 43
Removing and Replacing a Removable 3.5-inch SATA Hard Drive
View all HP 6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
12. Reconnect the power cord and any external devices, then turn on the computer. 13. Lock any security devices that were disengaged when the access panel was removed. Removing and Replacing a Removable 3.5-inch SATA Hard Drive Some models are equipped with a Removable SATA Hard Drive Enclosure in the 5.25-inch external drive bay. The hard drive is housed in a carrier that can be quickly and easily removed from the drive bay. To remove and replace a drive in the carrier: NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. 1. Unlock the hard drive carrier with the key provided and slide the carrier out of the enclosure. 2. Remove the screw from the rear of the carrier (1) and slide the top cover off the carrier (2). Figure 2-33 Removing the Carrier Cover ENWW Installing and Removing Drives 37