HP 6005 Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models
HP 6005 - Pro Microtower PC Manual
 |
View all HP 6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6005 manual content summary:
- HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 1
Computer Setup (F10) Utility Guide HP Compaq 6005 Pro Business PCs - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 2
Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services -Packard Company. Computer Setup (F10) Utility Guide HP Compaq 6005 Pro Business PCs First Edition ( - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 3
About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes. WARNING! Text set off in this manner indicates that failure to follow directions could - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 4
iv About This Book ENWW - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 5
Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ...1 Using Computer Setup (F10) Utilities 2 Computer Setup-File ...3 Computer Setup-Storage 4 Computer Setup-Security 7 Computer Setup-Power 10 Computer Setup-Advanced 11 Recovering the Configuration Settings 13 - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 6
vi ENWW - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 7
property identification number assigned by the company to this computer. ● Enable the power-on password prompt during system restarts (warm boots) as well as during power-on. ● Establish a setup password that controls access to Computer Setup (F10) Utility and the settings described in this section - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 8
, you must restart the computer and again press F10 when the monitor light turns green to access the utility. 3. Select your language from the list and press Enter. 4. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security, Power and Advanced. 5. Use the - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 9
Computer Setup-File NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2 Computer Setup- memory size/speed, number of channels (single or dual) (if applicable) ● Integrated MAC address for embedded, enabled NIC (if applicable) ● System BIOS - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 10
Computer Setup-Storage NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3 Computer Setup-Storage Option Description Device Configuration Lists all installed BIOS-controlled storage devices. When a device is selected, detailed information - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 11
if they are booted to after disabling RAID. For more information on RAID, go to http://www.hp.com/support. Select your country and language, select See support and troubleshooting information, enter the model number of the computer, and press Enter. In the Resources category, click Manuals (guides - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 12
Table 3 Computer Setup-Storage (continued) Option Description To boot one time from a device other than the default device specified in Boot Order, restart the computer and press F9 when the monitor light turns green. After POST is completed, a list of bootable devices is displayed. Use the arrow - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 13
set, it is required to change Computer Setup options, flash the ROM, and make changes to certain plug and play settings under Windows. Power-On Password See the Desktop Management Guide for more information. Allows you to set and enable power-on password. The power-on password prompt appears after - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 14
cold-boot sequence. NOTE: This selection will only appear when at least one drive that supports the DriveLock feature is attached to the system. You may need to power-cycle the system and re-enter F10 Setup in order to manage DriveLock passwords. See the Desktop Management Guide for more - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 15
requires turning the computer off and then back on. NOTE: To enable this option, a Setup password must be set. Master Boot Record Security Allows you to disable/enable Master Boot Record Security. ● Save Master Boot Record - This option will appear if Master Boot Record Security is enabled - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 16
Computer Setup-Power NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 5 Computer Setup-Power Option Description OS Power Management ● S5 Maximum Power Savings-Enable/Disable. Enabling this feature reduces the power of this system as much - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 17
Computer Setup-Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 6 Computer Setup-Advanced (for advanced users) Option Description Power-On Options Allows you to set: ● POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 18
time to select F10 to enter Computer (F10) Setup. ● Bypass F1 Prompt. This feature allows the system to boot without pressing F1 at the prompt when the configuration changes. Execute Memory Test Restarts the computer and executes the POST memory test. (some models) BIOS Power-On Allows you to set - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 19
giving more DCH space for additional PCI cards which may need option ROM space. The default will be to have the NIC option-ROM-enabled. ● SATA RAID Option ROM Download (enable/disable). The BIOS contains an embedded SATA RAID option ROM to for RAID support. This can be temporarily disabled to save - HP 6005 | Computer Setup (F10) Utility Guide - HP Compaq 6005 Pro Models - Page 20
media device or other storage media emulating a diskette with the saved configuration and perform the Restore from Removable Media command with the Computer Setup (F10) Utility. (See Restore from Removable Media on page 3 in the Computer Setup -File table.) 14 Computer Setup (F10) Utility ENWW
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Computer Setup (F10) Utility Guide
HP Compaq 6005 Pro Business PCs