HP 620 Compaq 320, 321, 420, 421, 620 and 621 Notebook PCs HP 420 and 620 Not - Page 64
Hard drive, Remove the two Phillips PM2.5×6.0 screws
UPC - 885631889732
View all HP 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Hard drive NOTE: The hard drive spare part kit includes a hard drive bracket. Description 500-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 320-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 250-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays 500-GB, 7200-rpm hard drive 320-GB, 7200-rpm hard drive 250-GB, 7200-rpm hard drive 250-GB, 5400-rpm hard drive 160-GB, 7200-rpm hard drive Spare part number 611029-001 611028-001 611027-001 608139-001 608138-001 608137-001 493994-001 455954-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 53). 5. Remove the service door (see Service door on page 53). Remove the hard drive from a 39.6-cm (15.6-in) computer: 1. Position the computer right-side up with the front toward you. 2. Remove the two Phillips PM2.5×6.0 screws (1) and loosen the Phillips PM2.5×11.0 captive screw (2) that secure the hard drive to the computer. 3. Grasp the mylar tab on the hard drive and slide the hard drive (3) to the right to disconnect it from the system board. 56 Chapter 4 Removal and replacement procedures