HP 620 Compaq 320, 321, 420, 421, 620 and 621 Notebook PCs HP 420 and 620 Not - Page 94
Remove the Torx M2.5×6.0 screw, and remove the cable
UPC - 885631889732
View all HP 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
3. Remove the Torx M2.5×6.0 screw (3) then, lift the USB connector assembly (4) from the base enclosure. Remove the USB connector assembly on 35.6-cm (14.0-in) and 33.8-cm (13.3-in) computers: 1. Position the computer right-side up with the right side toward you. 2. Release the ZIF connector (1) and remove the cable (2) from the system board. 3. Lift the USB connector assembly (3) that is held on the base enclosure with adhesive. Reverse this procedure to install the USB connector assembly. 86 Chapter 4 Removal and replacement procedures
3.
Remove the Torx M2.5×6.0 screw
(3)
then, lift the USB connector assembly
(4)
from the base
enclosure.
Remove the USB connector assembly on
35.6-cm
(14.0-in) and
33.8-cm
(13.3-in) computers:
1.
Position the computer right-side up with the right side toward you.
2.
Release the ZIF connector
(1)
and remove the cable
(2)
from the system board.
3.
Lift the USB connector assembly
(3)
that is held on the base enclosure with adhesive.
Reverse this procedure to install the USB connector assembly.
86
Chapter 4
Removal and replacement procedures