HP 620 Compaq 320, 321, 420, 421, 620 and 621 Notebook PCs HP 420 and 620 Not - Page 95
Speaker, Disconnect the speaker cable from the connector
UPC - 885631889732
View all HP 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Speaker The spare part number for the speaker used in all models is 605792-001. Before removing the speaker, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 53). 5. Remove the service door (see Service door on page 53). 6. Remove the palm rest (see Palm rest on page 68). 7. Remove the keyboard (see Keyboard on page 73). 8. Remove the top cover (see Top cover on page 77). Remove the speaker: 1. Disconnect the speaker cable from the connector (1) on the system board. 2. Release the cable from the cable retainers (2) then, push up on the speaker from the back (3) to remove it from the base enclosure. Reverse this procedure to install the speaker. Component replacement procedures 87