HP 6910p External Devices - Windows XP
HP 6910p - Compaq Business Notebook Manual
UPC - 883585172306
View all HP 6910p manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6910p manual content summary:
- HP 6910p | External Devices - Windows XP - Page 1
External Devices User Guide - HP 6910p | External Devices - Windows XP - Page 2
© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be - HP 6910p | External Devices - Windows XP - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - HP 6910p | External Devices - Windows XP - Page 4
iv Product notice ENWW - HP 6910p | External Devices - Windows XP - Page 5
Table of contents 1 Using a USB device Connecting a USB device ...2 Stopping and removing a USB device 2 Using USB legacy support ...3 2 Using a 1394 device Connecting a 1394 device ...6 Stopping and removing a 1394 device 6 3 Using the docking connector Index ...9 ENWW v - HP 6910p | External Devices - Windows XP - Page 6
vi ENWW - HP 6910p | External Devices - Windows XP - Page 7
drive, printer, scanner, or hub. Devices can be connected to the computer or an optional docking device. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions - HP 6910p | External Devices - Windows XP - Page 8
" message is displayed in the notification area, at the far right of the taskbar. Stopping and removing a USB device CAUTION: To prevent loss of information or an unresponsive system, stop the USB device before removing it. CAUTION: To prevent damage to a USB connector, do not pull on the cable to - HP 6910p | External Devices - Windows XP - Page 9
pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select System Configuration > Device configurations, and then press enter. 3. Use the arrow keys to enable or disable USB legacy support, and then press f10. 4. To - HP 6910p | External Devices - Windows XP - Page 10
4 Chapter 1 Using a USB device ENWW - HP 6910p | External Devices - Windows XP - Page 11
camcorders often require a 1394 connection. Some 1394 devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the user guide for the device. The 1394 port also supports IEEE 1394a devices. ENWW 5 - HP 6910p | External Devices - Windows XP - Page 12
to the 1394 port. You will hear a sound when the device has been detected. Stopping and removing a 1394 device CAUTION: To prevent loss of information or an unresponsive system, stop the 1394 device before removing it. CAUTION: To prevent damage to a 1394 connector, do not pull on the cable to - HP 6910p | External Devices - Windows XP - Page 13
3 Using the docking connector The docking connector connects the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. ENWW 7 - HP 6910p | External Devices - Windows XP - Page 14
8 Chapter 3 Using the docking connector ENWW - HP 6910p | External Devices - Windows XP - Page 15
cable, connecting 6 1394 devices connecting 6 description 5 stopping 6 1394 port 5 C cables 1394 6 USB 2 D docking connector 7 H hubs 1 P ports 1394 5 USB 1 U USB cable, connecting 2 USB devices connecting 2 description 1 removing 2 stopping 2 USB hubs 1 USB legacy support 3 USB ports, identifying - HP 6910p | External Devices - Windows XP - Page 16
10 Index ENWW - HP 6910p | External Devices - Windows XP - Page 17
- HP 6910p | External Devices - Windows XP - Page 18
External Devices
User Guide