HP 6910p Memory Modules - Windows Vista
HP 6910p - Compaq Business Notebook Manual
UPC - 883585172306
View all HP 6910p manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6910p manual content summary:
- HP 6910p | Memory Modules - Windows Vista - Page 1
Memory Modules User Guide - HP 6910p | Memory Modules - Windows Vista - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: June 2007 Document Part Number: 440146-001 - HP 6910p | Memory Modules - Windows Vista - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - HP 6910p | Memory Modules - Windows Vista - Page 4
iv Product notice ENWW - HP 6910p | Memory Modules - Windows Vista - Page 5
Table of contents Adding or replacing memory modules Adding or replacing a memory module to the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 5 Index ...9 ENWW v - HP 6910p | Memory Modules - Windows Vista - Page 6
vi ENWW - HP 6910p | Memory Modules - Windows Vista - Page 7
or replacing memory modules The memory module compartment is located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot - HP 6910p | Memory Modules - Windows Vista - Page 8
the power button. Then shut down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory - HP 6910p | Memory Modules - Windows Vista - Page 9
to both the left and right edges of the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close the cover (2). ENWW Adding or replacing a memory module to the expansion memory module slot 3 - HP 6910p | Memory Modules - Windows Vista - Page 10
13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 15. Reconnect external power and external devices. 16. Turn on the computer. 4 Adding or replacing memory modules ENWW - HP 6910p | Memory Modules - Windows Vista - Page 11
the power button. Then shut down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory - HP 6910p | Memory Modules - Windows Vista - Page 12
removal, place it in an electrostatic-safe container. 10. Insert a memory module: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the - HP 6910p | Memory Modules - Windows Vista - Page 13
13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 15. Reconnect external power and external devices. 16. Turn on the computer. ENWW Upgrading a memory module in the primary memory module slot 7 - HP 6910p | Memory Modules - Windows Vista - Page 14
8 Adding or replacing memory modules ENWW - HP 6910p | Memory Modules - Windows Vista - Page 15
Index M memory module adding 2 inserting 6 removing 2, 5 replacing 2, 5 upgrading primary 5 memory module compartment cover removing 2 replacing 3 ENWW Index 9 - HP 6910p | Memory Modules - Windows Vista - Page 16
10 Index ENWW - HP 6910p | Memory Modules - Windows Vista - Page 17
- HP 6910p | Memory Modules - Windows Vista - Page 18
Memory Modules
User Guide