HP 7550 HP Photosmart 7550 Series printer - (English) Setup Guide

HP 7550 - PhotoSmart Color Inkjet Printer Manual

HP 7550 manual content summary:

  • 1
  • 2

1
unpack your hp printer
2
plug in the power cord
3
load plain paper in the IN tray
1. Lift the OUT tray.
2. Pull out the paper length guide on the IN tray.
3.
Slide the paper width guide as far to the left as it
will go.
4. Move the photo tray slider toward you until it stops.
This disengages the photo tray.
5.
Place a stack of plain paper into the IN tray.
6. Adjust the paper width guide and paper length guide
to fit close to the edges of the paper without bending
the paper.
7. Lower the OUT tray.
1.
OUT tray
4.
Photo tray slider
2.
Paper length guide
5.
IN tray
3.
Paper width guide
Do not touch the
ink nozzles or the
copper contacts!
Setup Guide
Documentation
Software and
Printer Help on CD
HP #57
HP #58
Print cartridges
Power cord
58
57
56
3.
Print cartridge cradle latch
1.
Power
button
2.
Side door
4.
Plastic tape
5.
6.
7.
Calibration page
Q1605-90198
Printer
Copper contacts
1.
2.
3.
HP #56
Power module
4
install the print cartridges
1.
Press the
Power
button to turn the printer on.
2.
Insert your forefinger behind the notch on the
left side of the side door and pull out to open
the door.
3.
Pop open each print cartridge cradle latch by
pulling out the bottom of the latch.
4.
Remove the plastic tape from each print
cartridge.
5.
Insert each print cartridge so the copper
contacts go in first.
Insert the
HP #56 black
print cartridge in the
right stall.
Insert the
HP #57 tri-color
print cartridge in the
middle stall.
Insert the
HP #58 photo
print cartridge in the left
stall.
6.
Close each print cartridge cradle latch by
pulling out the bottom of the latch, pressing
down, then releasing the latch.
7.
Close the side door and press the
OK
button.
A calibration page prints automatically. This
verifies that the print cartridges are installed
correctly.
hp
photosmart 7550
setup
guide
!
Windows PC:
Be sure to insert the HP
Photosmart CD before you
connect the printer to your
computer with the USB cable.