HP 8000 Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto
HP 8000 - Elite Convertible Minitower PC Manual
UPC - 884420665106
View all HP 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 8000 manual content summary:
- HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 1
Technical Reference Guide HP Compaq 8000 Elite Series Business Desktop Computers Document Part Number: 601197-001 December 2009 This document provides information on the design, architecture, function, and capabilities of the HP Compaq 8000 Elite Series Business Desktop Computers. This information - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 2
Windows, Windows NT, Windows XP, Windows Vista, and Windows 7 are trademarks of Microsoft Corporation in the U.S. and other countries. Intel, Intel Core 2 Duo, Intel Core 2 Quad, Pentium Dual-Core . Technical Reference Guide HP Compaq 8000 Elite Series Business Desktop Computers First Edition ( - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 3
Storage 2-8 2.3.6 Serial Interface 2-8 2.3.7 Universal Serial Bus Interface 2-8 2.3.8 Network Interface Controller 2-8 2.3.9 Graphics Subsystem 2-9 2.3.10 Audio Subsystem 2-9 2.3.11 HP ProtectTools Embedded Security 2-10 2.4 Specifications 2-10 Technical Reference Guide www.hp.com iii - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 4
4.2.5 PCI Power Management Support 4-4 4.2.6 PCI Connectors 4-5 4.3 System Resources 4-7 4.3.1 Interrupts 4-7 4.3.2 Direct Memory Access 4-8 4.4 Real-Time Clock and Configuration Memory 4-9 4.4.1 Clearing CMOS 4-9 4.4.2 Standard CMOS Locations 4-10 4.5 System Management 4-10 4.5.1 Security - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 5
6-7 7 Power and Signal Distribution 7.1 Introduction 7-1 7.2 USDT Power Distribution 7-1 7.3 SFF/CMT Power Distribution 7-2 7.4 Power Control 7-4 7.4.1 Power Button 7-4 7.4.2 Wake Up Events 7-6 7.5 Power Management 7-6 7.6 Signal Distribution 7-8 Technical Reference Guide www.hp.com v - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 6
8-3 8.3.4 Boot Error Codes 8-4 8.4 Client Management Functions 8-5 8.4.1 System ID and ROM Type 8-6 8.4.2 Temperature Status 8-6 8.5 SMBIOS support 8-7 8.6 USB Legacy Support 8-8 8.7 Management Engine Functions 8-8 A Error Messages and Codes Index vi www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 7
and the power supply assembly. The appendices contain general data such as error codes and information about standard peripheral devices such as keyboards, graphics cards, and communications adapters. This guide can be used either as an online document or in hardcopy form. 1.1.1 Online Viewing - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 8
on a sticker placed on the exterior cabinet. The serial number is also written into firmware and may be read with HP Diagnostics or Insight Manager utilities. 1.4 Notational Conventions The notational guidelines used in this guide are described in the following subsections. 1.4.1 Special Notices - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 9
AC alternating current ACPI Advanced Configuration and Power Interface A/D analog-to-digital ADC Analog-to-digital converter ADD or ADD2 Advanced digital display (card) AGP Accelerated graphics port AHCI SATA Advanced Host controller Interface AMT Active Management Technology API - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 10
access Desktop management interface dots per inch dynamic random access memory data request Digital video interface Double word (32 bits) extended display identification data extended data out (RAM type) electrically erasable PROM enhanced graphics adapter Electronic Industry Association www.hp.com - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 11
IOPS Technical Reference Guide Table 1-1 (Continued) Acronyms and Abbreviations Description extended ISA enhanced parallel port enhanced IDE Extended System mode (RAM type) Floating point unit (numeric or math coprocessor) Frames per second Foot/feet gigabyte Graphics/memory controller hub ground - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 12
bit/least significant byte logical unit (SCSI) Meter Memory controller hub multimedia extensions Motion Picture Experts Group millisecond most motion video acceleration motion video window variable parameter/value network interface card/controller nickel-metal hydride non-maskable interrupt - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 13
phase alternating line Parallel ATA Personal computer Printed circuit assembly peripheral component interconnect PCI Express pulse code modulation Personal Computer Memory Card International Association PCI express graphics Power factor correction personal identification number Programmed I/O Part - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 14
Graphics RAM Single instruction multiple data single in-line memory module Self Monitor Analysis Report Technology system management interrupt system management mode system management RAM small outline DIMM serial presence detect Sony/Philips Digital Interface (IEC-958 specification) Spare - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 15
Ultra DMA unregistered/unbuffered DIMM Uniform resource locator microsecond Universal Serial Bus unshielded twisted pair volt Volts alternating current Volts direct current Video Electronic Standards Association video graphics adapter very large scale integration Video RAM watt Wake-On-LAN Windows - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 16
Introduction 1-10 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 17
the needs of the office enterprise. HP 8000 Elite USDT HP 8000 Elite SFF Figure 2-1. HP Compaq 8000 Elite Business PCs This chapter includes the following topics: ■ Features (2.2) ■ System architecture (2.3) ■ Specifications (2.4) HP 8000 Elite CMT Technical Reference Guide www.hp.com 2-1 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 18
protect ❏ Power-on password ❏ Administrator password ❏ Serial port disable (SFF and CMT form factors only) ❏ Smart Cover (hood) Sense ❏ Smart Cover (hood) Lock (SFF and CMT form factors only) ❏ Tower stand (USDT form factor only) ❏ USB port disable ❏ Intel Standard Manageability support ❏ Intel - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 19
the different PC series based on form factor: Table 2-1 Feature Differences by Form Factor USDT SFF CMT Processor types supported Intel Celeron, Pentium dual-core, Core 2 Duo Intel Celeron, Pentium dual-core, Core 2 Duo, Core 2 Quad Intel Celeron, Pentium dual-core, Core 2 Duo, Core 2 Quad - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 20
controller of the Q45 on SFF and CMT systems can be upgraded through a PCI Express (PCIe) x16 graphics slot. All systems include a serial ATA (SATA) hard drive in the standard configuration. Table 2-2 lists the differences between models by form factor. Table 2-2. Architectural Differences by Form - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 21
slot [5] Power Supply PCIe x4 (x16 conn.) [2] Notes: [1] 2 SATA ports in USDT, 3 SATA ports in SFF, 4 SATA ports in CMT, and 1 eSATA port in SFF and CMT. [2] SFF and CMT only [3] 1 in SFF, 3 in CMT [4] 2 in SFF, 1 in CMT [5] USDT only Figure 2-2. HP Compaq 8000 Elite Business PC Architecture - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 22
FSB speed of 800-, 1066-, or 1333-MHz 82801 ICH10-DO PCI 2.3 bus I/F PCIe bus I/F LPC bus I/F SMBus I/F SATA I/F HD audio interface RTC/CMOS IRQ controller Power management logic USB 1.1/2.0 controllers supporting 12 ports Gigabit Ethernet controller 2-6 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 23
to eight gigabytes of memory while the SFF and CMT form factors provide four UDIMM sockets and support a total of 16 gigabytes of memory. ✎ 1333-MHz memory modules are clocked down to 1066 megahertz ✎ SODIMM and DIMM components are NOT interchangeable. Technical Reference Guide www.hp.com 2-7 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 24
as a CD-ROM drive. 2.3.6 Serial Interface The SFF and CMT form factors include a serial port accessible at the rear of the chassis. The SFF and CMT form factors may be upgraded with a second serial port option. The serial interface is RS-232-C/16550-compatible and supports standard baud rates up to - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 25
Graphics Controller Recommended for Hi 2D, Entry 3D Bus Type Int. PCI Express Memory Amount 32 MB pre-allocated Memory Type DVMT -streaming is supported. These systems include a 1.5-watt output amplifier driving an internal speaker, which can be muted with the F10 BIOS control. All models - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 26
through a Windows Control Panel applet. The management functions are accessible thro;ugh establishlished protocols such as DMI, SNMP, or WEBEM. 2.4 Specifications This section includes the environmental, electrical, and physical specifications for the systems covered in this guide. Where provided - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 27
Maximum Continuous Power: USDT SFF CMT 135 watts 240 watts 320 watts NOTE: Energy Star 4.0 with 80Plus Bronze-level compliancy option available for SFF and CMT form factors. Table 2-8 Physical Specifications Parameter USDT [2] SFF [2] CMT [3] Height 2.60 in (6.60 cm) 3.95 in (10.03 cm - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 28
System Overview 2-12 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 29
Cntrl Channel A Channel B Note: [1] Not present on USDT form factor. DIMM or SODIMM XMM3 DIMM XMM4 [1] Figure 3-1. Processor/Memory Subsystem Architecture This chapter includes the following topics: ■ Intel processor (3.2) ■ Memory subsystem (3.3) Technical Reference Guide www.hp.com 3-1 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 30
Overview The models covered in this guide support Intel Celeron, Pentium, and Core 2 processors, including the latest Intel Core 2 Duo, and Core 2 Quad processors. Key features of supported Intel processors include: ■ Dual- or quad-core architecture-Provides full parallel processing. ■ Execution - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 31
The USDT form factor can support a processor with a maximum power consumption of 65 watts. The SFF and CMT form factors can support a processor with a maximum power consumption of 95 watts. Exceeding these limits can result in system damage and lost data. Technical Reference Guide www.hp.com 3-3 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 32
ECC DDR3-800 (PC3-6400), DDR3-1066 (PC3-8500), and DDR3-1333 (PC3-10600) memory modules. The USDT form factor supports up to eight gigabytes of memory while the SFF and CMT form factors support up to 16 gigabytes of memory. ✎ In these systems, DDR3-1333 modules operate at the same speed/rate as DDR3 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 33
CMT form factors use DIMM sockets. [2] Not present on USDT form factor. [3] Dual-channel symetrical [4] Only SFF and CMT support this size memory HP recommends using symmetrical loading (same-capacity, same-speed modules across both channels) to achieve the best performance. CAUTION: Always power - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 34
Figure 3-2. System Memory Map (for maximum of 8 gigabytes) ✎ All locations in memory are cacheable. Base memory is always mapped to DRAM. The next 128 KB fixed memory area can be mapped to DRAM or to PCI space. Graphics RAM area is mapped to PCI locations. 3-6 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 35
using auto-incremented addressing. Devices on the PCI bus must comply with PCI protocol that allows configuration of that device by software. In this system, configuration mechanism #1 (as described in the PCI Local Bus specification Rev. 2.3) is employed. Technical Reference Guide www.hp.com 4-1 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 36
in 6+6 configuration. 8+4 configuration will have USB 1.1 controller #6 use Function 26, Device 2. [3] SFF and CMT form factors only. [4] CMT form factor only [5] Function is only visible in IDE mode (not visible in AHCI orRAID SATA emulation mode). 4-2 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 37
Connector Slot 2 REQ1/GNT1 PCI Connector Slot 3 REQ2/GNT2 Note [1] [1] [2] NOTE: [1] SFF and CMT form factors only. [2] CMT form factor only PCI bus arbitration is based on a round-robin scheme that complies with the fairness algorithm specified by the PCI specification. The bus parking policy - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 38
Support This system complies with the PCI Power Management Interface Specification (rev 1.0). The PCI Power Management Enable (PME-) signal is supported by the chipset and allows compliant PCI peripherals to initiate the power management routine. 4-4 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 39
PCI Connectors PCI 2.3 Connector A1 System Support A49 A52 A62 B2 B49 B52 B62 Figure 4-2. 32-bit, 5.0-volt PCI 2.3 Bus Connector Pin B Signal 01 -12 VDC 02 TCK 03 GND 04 TDO 05 +5 VDC 06 +5 VDC 07 INTB- 08 INTD- 09 PRSNT1- 10 56 TRDY- 57 GND 58 Guide www.hp.com 4-5 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 40
Support PCIe Connectors A1 A11 A12 A18 x1 Connector A82 x16 Connector B1 B11 B12 B82 Figure 4-3. PCIe Bus Connectors Pin B Signal 01 +12 VDC 02 +12 VDC 03 RSVD 04 GND 05 SMCLK 06 +5 VDC 07 GND 08 +3.3 VDC 09 JTAG1 10 PERp3 57 PERn3 hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 41
Support 4.3 System Resources This section describes the availability and basic control and CLI instructions. A INTA-H (PCI) or IRQ0 services the peripheral as appropriate. Most IRQs are routed through the I/O controller of the super I/O component, which provides the serializing function. A serialized - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 42
PIRQ G C B A PIRQ H D C B NOTES: [1] SFF and CMT only [2] CMT only The PCI interrupts can be configured by PCI Configuration Registers 60h..63h to share the standard ISA interrupts (IRQn). ✎ The APIC mode is supported by Windows NT, Windows 2000, and Windows XP, and Windows Vista operating systems - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 43
-Ored circuit allows the RTC and configuration memory to draw power from the power supply. The battery is located in a battery holder on the system board and has a life expectancy of three or more years. When the battery has expired it is replaced with a CR2032 or equivalent 3-VDC lithium battery - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 44
System Support 4.4.2 Standard CMOS Locations Table 4-6 describes standard configuration memory locations 0Ah-3Fh. These locations are accessible through using OUT/IN assembly language instructions using port 70/71h or BIOS function INT15, AX=E823h. Location 00-0Dh 0Eh 0Fh 10h 11h 12h 13h 14h 15h - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 45
Support Power-On / Setup Password These systems include a power-on and setup passwords, which may be enabled or disabled (cleared) through a jumper on the system board. The jumper controls a GPIO input to the 82801 ICH10 that is checked during POST. The password is stored in configuration memory - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 46
System Wakes From Power Button Suspend or soft-off RTC Alarm Suspend or soft-off Wake On LAN (w/NIC) Suspend or soft-off PME Suspend or soft-off Serial Port Ring Suspend or soft-off USB Suspend only Keyboard Suspend only Mouse Suspend only 4-12 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 47
board Invalid ROM checksum error Blinks red 8 times @ 1 Hz [1] 8 Reflash BIOS ROM Boot failure (after power on) Blinks red 9 times @ 1 Hz [1] 9 Check power supply, processor, sys. bd Bad option card Blinks red 10 times @ 1 Hz [1] None Replace option card NOTES: Beeps are repeated for - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 48
System Support The RPM (speed) of all fans is the result of the temperature of the CPU as sensed by speed control circuitry. The fans are controlled to controller. 4.6.1 System I/O Map Table 4-9 lists the fixed addresses of the input/output (I/O) ports. 4-14 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 49
active only if standard I/O space is enabled for sec. drive) Serial Port (COM1) Interrupt Controller Parallel Port (LPT2) Parallel Port (LPT1) Parallel Port (LPT3) PCI Configuration Address (dword access only ) Reset Control Register PCI Configuration Data (byte, word, or dword access) NOTE: Assume - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 50
■ Flash security override ■ Serial port detect ■ REQn#/GNTn# sigal control ■ Password enable ■ Boot block enable SIO Controller Functions In addition to the serial and parallel port functions, the SIO controller provides the following specialized functions through GPIO ports: ■ Power/Hard drive LED - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 51
in this chapter: ■ SATA/eSATA interfaces (5.2) ■ Serial interfaces (5.3) ■ Parallel interface support (5.4) ■ Keyboard/pointing device interface (5.5) ■ Universal serial bus interface (5.6) ■ Audio subsystem (5.7) ■ Network interface controller (5.8) Technical Reference Guide www.hp.com 5-1 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 52
four serial ATA (SATA) interfaces that support tranfer rates up to 3.0 Gb/s and RAID data protection functionality. The SFF and CMT form factors can also support an J102) that mates directly (i.e., without a cable) to a 2.5-inch mass storage device. 5-2 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 53
Input/Output Interfaces 5.2.2 eSATA interface The SFF and CMT form factors provide a SATA/eSATA port (connector P64 on the system board) that can support an external SATA (eSATA) storage device. The eSATA interface provides higher bandwidth than USB 2.0 and Firewire (1394) interfaces. An optional - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 54
To Send Ring Indicator 5 GND Ground -- -- -- The standard RS-232-C limitation of 50 feet (or less) of cable between the DTE (computer) and DCE (modem) should be followed to minimize transmission errors. Higher baud rates may require shorter cables. 5-4 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 55
Interfaces 5.4 Parallel Interface Support The SFF and CMT form factors include a system board header (J50) that supports an optional parallel bracket/cable assembly that provides a parallel interface for a peripheral device such as a printer. The parallel interface supports bi-directional 8-bit - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 56
are redefined depending on the port's operational mode. e wq LF- Line Feed [2] 2 D0 Data 0 15 ERR- Error [3] 3 D1 4 D2 Data 1 Data 2 16 INIT Data 6 21 GND Ground 9 D7 Data 7 22 GND Ground 10 ACK- Acknowledge / Interrupt [1] 23 GND Ground 11 BSY 12 PE hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 57
provided by the SIO controller component, which integrates 8042-compatible keyboard controller logic (hereafter referred to as simply the "8042") to communicate with the keyboard and pointing device using bi-directional serial data transfers. The 8042 handles scan code translation and password lock - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 58
and electrically. The operation of the interface (clock and data signal control) is the same as for the keyboard. The pointing device interface uses Description Pin Signal Description 1 DATA Data 4 + 5 VDC Power 2 NC Not Connected 5 CLK Clock 3 GND Ground 6 NC Not Connected - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 59
system configuration changes without powering down or even rebooting systems. These systems provide ten externally-accessible USB ports; four front panel USB ports (which may be disabled) and six USB ports on the rear panel. In addition, the SFF and CMT form factors support a media reader accessory - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 60
on cable specification (see power ground should be tied together at the host end but left unconnected at the device end to avoid ground loops. Table 5-8. USB Color Code Signal Insulation color Data + Green Data - White Vcc Red Ground Black 5-10 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 61
Figure 5-8. All control functions such as volume, audio source selection, and sampling rate are controlled through software through or to powered speakers that contain amplifiers. Front Panel Mic In Rear Panel Line In [1] 82801 ICH HD Audio Interface PC Beep HD Audio Guide www.hp.com 5-11 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 62
to audio codec registers ■ Support for greater than 48-KHz sampling ■ HD audio interface 5.7.2 HD Audio Link Bus The HD audio controller and the HD audio codec communicate over a five-signal HD Audio Link Bus (Figure 5-9). The HD Audio Interface includes two serial data lines; serial data out (SDO - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 63
subsystem are listed in Table 5-9. Table 5-9. HD Audio Subsystem Specifications Parameter Measurement Sampling Rates: DAC ADC 44.1-, 48-, 96 line in -84 db -80 db -78 db Max. Subsystem Power Output to 4-ohm Internal Speaker (with 10% THD): 1.5 watts Gain Step 1.5 db Master Volume Range - - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 64
features: ■ VLAN tagging with Windows XP and Linux ■ Multiple VLAN support with Windows XP (and later) ■ Power management support for ACPI 1.1, PXE 2.0, WOL, ASF 1.0, and IPMI ■ Cisco Etherchannel support ■ Speed and Activity LED indicator drivers The controller features high and low priority - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 65
and is the default power management mode. The following wakeup events may be individually enabled/disabled through the supplied software driver: ■ Magic Packet or Windows Control Panel) allows configuration of operational parameters such as WOL and duplex mode. Technical Reference Guide www.hp.com - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 66
Windows 7 MS Windows NT 3.51 & 4.0 Novell Netware 3.x, 4.x, 5x Novell Netware/IntraNetWare SCO UnixWare 7 Linux 2.2, 2.4 PXE 2.0 Boot ROM Support Intel PRO/100 Boot Agent (PXE 3.0, RPL) F12 BIOS Support Yes Bus Inteface PCI Express x1 Power Management Support ACPI, PCI Power Management Spec - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 67
dual-monitor support in the standard configuration. The SFF and CMT systems include two PCIe graphics slots for upgrading the graphics controller by: ■ x16 connector), in which the integrated graphics controller can be re-enabled through the BIOS settings This chapter covers the following subjects: - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 68
RGB Monitor Digital DisplayPort Monitor PCIe x16 Graphics slot [1] Switch GMA 4500 Controller SDRAM Controller DDR3 SDRAM (System Memory) PCIe x4/x16 slot [1] PCIe data ICH10 PCIe I/F NOTE: [1] SFF and CMT form factors only. Figure 6-1. Q45-based Graphics, Block diagram The GMA 4500 provides - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 69
on the operating system and/or applications running on the machine. For viewing the maximum amount of available frame buffer memory MS Windows go to the Control Panel and select the Display icon, then > Settings > Advanced > Adapter. The Microsoft Direct Diagnostic tool included in most versions - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 70
Modes The GMA supports the following standard will be determined by the following factors: ■ Memory speed and amount ■ Single or dual channel memory ■ Number and type of monitors Gb/s. The DisplayPort interface provides multimode support through the use of an optional external adapter for connecting a - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 71
also include a PCIe x16 graphics connector that specifically supports a PCIe x16 graphics card and a PCIe x16 connector that provides PCIe x4 operation for an x4 or x16 PCIe card. These two PCIe slots provide the SFF and CMT form factors with flexible graphics upgrade paths. The upgrade procedure - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 72
of monitors simultaneously. 6.5.1 Analog Monitor Connector All form factors include a legacyVGA connector (Figure 6-2) for Description Red Analog 9 PWR +5 VDC (fused) [1] Blue Analog 10 GND Ground Green Analog 11 NC Not Connected Not Connected 12 SDA www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 73
(n) 1 7 ML Lane (p) 2 8 Ground 9 ML Lane (n) 2 10 ML Lane (p) 3 Table 6-4. DB-15 Monitor Connector Pinout Pin Signal 11 Ground 12 ML Lane (n) 3 13 Ground 14 Ground 15 AUX Ch (p) 16 Ground 17 AUX Ch (n) 18 Hot Plug Detect 19 DP Power Return 20 DP Power Technical Reference Guide www.hp.com 6-7 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 74
Integrated Graphics Subsystem 6-8 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 75
■ Power Control (7.4) ■ Signal distribution (7.5) 7.2 USDT Power Distribution Each form factor uses a unique power supply assembly and implements different methods of power generation and distribution. The USDT form factor uses an external ("brick") supply while the SFF and CMT form factors use - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 76
SFF/CMT Power Distribution The SFF and CMT form factors use a common power source power supply unit contained within the system chassis. Figure 7-2 shows the block diagram for power generation in the SFF and CMT. Front Bezel Power Button Power On System Board Power Control Logic, DC/DC Converter - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 77
the specifications of the 240-watt power supply used in the SFF unit. Table 7-2. SFF 240-Watt Power Supply Unit Specifications Input 10%. Table 7-3 lists the specifications for the 320-watt power supply used in the CMT form factor. Table 7-3. CMT 320-Watt Power Supply Unit Specifications - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 78
in power control logic asserting PS On signal to Power Supply Assembly, which then initializes. ACPI four-second counter is not active. Negative pulse, of which the falling edge causes power control logic PS On is negated, de-activating the power supply. 7-4 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 79
system board. Blinks red 8 times @ 1 Hz [1] Invalid ROM (checksum error). Reflash ROM using CD or replace system board. Blinks red 9 times @ 1 Hz [1] System powers on but fails to boot. Check power supply, CPU, system board. Blinks red 10 times @ 1 Hz [1] Bad option card. No light System dead - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 80
signal on the PCI bus. Refer to Chapter 5, "Network Support" for more information. Modem Ring A ring condition on a serial port can be detected by the power control logic and, if so configured, cause the power control logic to wake up the system. Power Management Event A power management event that - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 81
shut down. Memory image saved to disk for recall on power up. G2, S5, D3cold System off. All components either completely shut down or receiving minimum power to perform system wake-up. PCI and PCIe 3.3V slot power (for wake-up events) can be selectively disabled in BIOS configuration. G3 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 82
only P2 Power supply header P3 Power supply header P5 Control panel (power button, power LED) header P6 Internal speaker header P8 CPU fan header SFF & CMT only SFF & CMT only P9 Chassis fan, primary, header P23 Front panel audio header P24 Front panel USB header P52 Serial port - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 83
GND 5 4 +12V 6 Hood Unlock Power Button/LED, HD LED Header P5 (CMT) HD LED Cathode 1 HD LED Anode 3 GND5 M Reset 7 +5 VDC 9 NC 11 GND 13 Chassis ID2 15 2 PS LED Cathode 4 PS LED Anode 6 Pwr Btn 8 GND 10 NC 12 GND 16 +5 VDC Chassis ID0 17 18 Chassis ID1 Serial Port B Header P52 UART2 DTR - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 84
Power and Signal Distribution 7-10 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 85
). The system BIOS includes such functions as Power-On Self Test (POST), PCI device initialization, Plug 'n Play support, power management activities, and the Setup utility. The firmware contained in the system BIOS ROM supports the following operating systems and specifications: ■ Windows XP (Home - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 86
BIOS ROM. If the system BIOS ROM fails the flash check, the boot block code provides the minimum amount of support necessary to allow booting the system and re-flashing the system BIOS HP. The splash screen (image displayed during POST) is stored in the system BIOS ROM and may be replaced Windows - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 87
communicates with an EEPROM on each DIMM through the SMBus to obtain data on the following DIMM parameters: ■ Presence ■ Size ■ Type ■ Timing/CAS latency ✎ Refer to Chapter 3, "Processor/Memory Subsystem" for the SPD format and DIMM data specific to this system. Technical Reference Guide www.hp - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 88
board. Blinks red 8 times @ 1 Hz 8 beeps Invalid ROM (checksum error). Reflash ROM using CD or replace system board. Blinks red 9 times @ 1 Hz 9 beeps System powers on but fails to boot. Check power supply, CPU, system board. Blinks red 10 times @ 1 Hz 10 beeps Bad option card. NOTE: Audible - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 89
Functions Table 8-2 provides a partial list of the client management BIOS functions supported by the systems covered in this guide. These functions, designed to support intelligent manageability applications, are HP-specific unless otherwise indicated. Table 8-2. Client Management Functions (INT15 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 90
the BX register. Systems have the following IDs and ROM family types: Table 8-3 System ID Numbers System (Form Factor) System ID USDT 3648h SFF 3646h CMT 3647h NOTE: For all systems, BIOS ROM Family = 786G7. The ROM family and version numbers can be verified with the Setup utility or the - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 91
Cache Information Port Connector Information System Slots BIOS Language Information System Event Log Information Physical Memory Array Memory Devices Memory Array Mapped Addresses Memory Device Mapped Addresses Cooling Device Structure Hardware Security Structure Boot Integrity Service Entry Point - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 92
the data from the device and convert it to PS/2 data. The data will be passed to the keyboard controller and processed as in the PS/2 interface. Changing the delay and/or typematic rate of a USB keyboard though BIOS function INT 16 is not supported. 8.7 Management Engine Functions The management - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 93
Blinks red 8 times @ 1 Hz Invalid ROM (checksum error). Reflash ROM using CD or replace system board. 9 beeps Blinks red 9 times @ 1 Hz System powers on but fails to boot. Check power supply, CPU, system board. 10 beeps Blinks red 10 times @ 1 Hz Bad option card. NOTE: Audible indications - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 94
. 213-Incompatible Memory Module BIOS detected installed DIMM(s) as being not compatible. 214-DIMM Configuration Warning A specific error has occurred in a memory device installed in the identified socket. 216-Memory Size Exceeds Max Installed memory exceeds the maximum supported by the system - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 95
1156-Serial Port A Cable Not Detected Cable from serial port Controller" in Computer Setup 1796-SATA Cabling Error One or more SATA devices are improperly attached. For optimal performance, the SATA 0 and SATA 1 connectors must be used before SATA 2 and SATA 3. Technical Reference Guide www.hp - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 96
Error Messages and Codes Table A-2. (Continued) Power-On Self Test (POST) Messages Error Message Probable Cause 1801-Microcode Patch Error A processor is installed for which the BIOS ROM has no patch. Check for ROM update. Invalid Electronic Serial Number Electronic serial number has become - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 97
Keyboard controller test failed 116-xx Way 0 read/write test failed 107-01 CMOS RAM test failed code may be caused by one of a variety of processor-related problems that may be solved by replacing the processor, although system board replacement may be needed. Technical Reference Guide www.hp - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 98
while restoring block in walking I/O test Increment pattern test failed ECC failure Memory increment pattern test Error while saving memory during increment pattern test Error while restoring memory during increment pattern test Memory random pattern test A-6 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 99
Messages and Codes Message 211-02 211-03 213-xx 214-xx 215-xx Table A-4. (Continued) Memory Error Messages Probable Cause Error while saving memory during random memory pattern test Error while restoring memory during random memory pattern test Incompatible DIMM in slot x Noise test failed Random - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 100
port address conflict 402-09 Interrupt test and data reg. failed 498-00 Printer failed or not connected 402-10 Interrupt test and control reg. -- -- failed A.8 Video (Graphics) Error Messages Table A-14 for additional video (graphics) messages. A-8 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 101
test 611-xx = Pri. diskette drive port addr. conflict 612-xx = Sec. diskette drive port addr. conflict 694-00 = Pin 34 not cut on 360-KB drive 697-00 = Diskette type error 698-00 = Drive speed not within limits 699-00 = Drive/media ID error (run Setup) Technical Reference Guide www.hp.com A-9 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 102
Messages and Codes A.10 Serial Interface Error Messages (11xx-xx) Table A-9. Serial Interface Error Messages Message Probable Data line fault 1101-09 Interrupt circuit failure 1150-xx Comm port setup error (run Setup) 1101-10 COM1 set to invalid INT 1151-xx COM1 address conflict 1101- - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 103
and Codes A.11 Modem Communications Error Messages (12xx-xx) Table A-10. Modem Communications Error Messages Message line fault 1204-07 Dial number string too long 1201-05 UART control signal failure 1204-08 Modem time-out waiting for remote response 1201 Reference Guide www.hp.com A-11 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 104
Messages and Codes Table A-10. (Continued) Modem Communications Error Messages Message Probable Cause Message Error Messages (16xx-xx) Message 1601-xx 1611-xx Table A-11 System Status Error Messages Probable Cause Temperature violation Fan failure A-12 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 105
Failed controller RAM diagnostics 17xx-07 Fatal error while writing 17xx-57 Failed controller-to-drive diagnostics 17xx-08 Failed compare of R/W buffers 17xx-58 Failed to write sector buffer 17xx-09 Failed to format a track 17xx-59 Failed to read sector buffer 17xx-10 Failed diskette - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 106
Error Messages and Codes NOTE: xx = 00, Hard drive ID test xx = 19, Hard drive power controller failure xx = 16, Hard drive conditional format test xx = 93, Sec. Controller or disk failure xx = 17, Hard drive ECC test xx = 99, Invalid hard drive type A-14 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 107
cartridge 19xx-06 Tape write-protect error 19xx-26 Cannot identify drive 19xx-07 Tape already Servo Written 19xx-27 Drive not compatible with controller 19xx-08 Unable to Servo Write 19xx-28 Format gap error 19xx-09 Unable to format 19xx-30 Exception bit not set 19xx-10 Format - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 108
tst failed, invalid resp. 2478-xx AVGA BitBLT test failed EGA memory test failed 2480-xx AVGA linedraw test failed A.16 Audio Error Messages (3206-xx) Message 3206-xx Table A-15 Audio Error Messages Probable Cause Audio subsystem internal error A-16 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 109
and Codes A.17 DVD/CD-ROM Error Messages (33xx-xx) Message 3301-xx 3305-xx Table A-16 DVD/CD-ROM Error Messages Probable Cause Drive test failed Seek test failed A.18 Network Interface Error Messages (60xx-xx) Message 6000-xx 6014-xx 6016-xx 6028-xx 6029-xx Table A-17 Network Interface Error - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 110
Controller/drive not connected 6nyy-99 Autoloader reported tape not loaded properly n = 5, Hard drive = 6, CD-ROM drive = 7, Tape drive yy = 00, ID = 03, Power check = 05, Read = 06, SA/Media = 08, Controller = 23, Random read = 28, Media load/unload A-18 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 111
occurred Left mouse button is stuck closed 8601-09 Mouse loopback test failed Right mouse button is inoperative 8601-10 Pointing device is inoperative Right mouse button is stuck closed 8602-xx I/F test failed Left block not selected -- -- Technical Reference Guide www.hp.com A-19 - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 112
Error Messages and Codes A-20 www.hp.com Technical Reference Guide - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 113
L LED (indications), boot error code 8-4 LED (indications), power button status 7-5 M Management engine 8-8 Memory, system 2-7, 3-3 memory allocation 3-5, 6-3 memory map 3-6 mouse (pointing device) interface 5-8 N Network Boot 8-3 Network Interface Controller 5-14 P parallel interface 5-5 Parallel - HP 8000 | Technical Reference Guide: HP Compaq 8000 Elite Series Business Deskto - Page 114
4-11 SMBIOS 8-7 specifications environmental, 2-10 hard drive, 2-13 optical drive, 2-12 physical 2-11 power supply 2-11 socket, processor 2-2, 2-6, 3-3 system board component designators7-8 system ID 8-6 T Temperature Status 8-6 U Universal Serial Bus (USB) interface 5-9 upgrading BIOS 8-2 upgrading
Technical Reference Guide
HP Compaq 8000 Elite Series
Business Desktop Computers
Document Part Number: 601197-001
December 2009
This document provides information on the design, architecture, function,
and capabilities of the HP Compaq 8000 Elite Series Business Desktop
Computers. This information may be used by engineers, technicians,
administrators, or anyone needing detailed information on the products
covered.