HP 800ps HP Designjet 800ps Printer - User's Guide - Page 135
Enter, Advance calibration, Paper, Either, Cancel, Advance, Calibration
View all HP 800ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Introduction Media & Ink The Front Panel Solutions Front Panel Printer Options Other Index Menu Structure Navigating the Menu System Message Descriptions Front Panel Messages (continued) Message Explanation and Action Option not available now Out of paper Paper advance calibration is recommended. Press ENTER to calibrate Paper advance calibration is recommended. Load paper and select Paper advance calibration. Press ENTER to finish Paper loaded with too much skew Press ENTER to retry Press CANCEL to abort You have selected an option in the menu that is not available at the moment. (The printer may be busy, out of ink, out of paper, etc.) The printer ran out of paper while printing the calibration pattern. Load a sheet or roll that is at least 65 cm (25 inches) long and 50 cm (20 inches) wide. You are recommended to perform the Advance calibration routine, to ensure the optimum print quality. Press the Enter key to create the calibration pattern. See Advance Calibration. You are recommended to perform the Advance calibration routine, to ensure the optimum print quality. Load a sheet or roll of paper and then select Advance calibration from the Paper menu. See Advance Calibration. During the loading of paper, the printer has detected that the paper is skewed too much, that is, it has not been loaded straight enough. ('Skew' is the angle between the actual paper edge and the correct line.) Either: Press the Enter key to restart the loading procedure; Or: Press the Cancel key to cancel paper loading. For more Messages, click on the Next Page button