HP 800ps HP Designjet 800ps Printer - User's Guide - Page 139
Either, Cancel, Replace Printheads, system, Ink system, Enter, Troubleshooting Procedure
View all HP 800ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Introduction Media & Ink The Front Panel Solutions Front Panel Printer Options Other Index Menu Structure Navigating the Menu System Message Descriptions Front Panel Messages (continued) Message Explanation and Action Printhead replacement not available now. Cancel print jobs before replacement Printhead warning Poor print quality Printheads not aligned Paper type not valid to align printheads Press ENTER to continue You have requested the printer to replace one or more printheads, but the printer is busy printing a job and cannot honor the request now. Either: press the Cancel key to cancel the job that is currently printing, and then again select Replace Printheads (from the Ink system menu). Or: wait until the job has finished printing (and there are no more jobs in the print queue), and then again select Replace Printheads (from the Ink system menu). A problem has occurred with one or more printheads. The printheads are still functional. The problem was detected either during printhead alignment or during troubleshooting. If you have completed the routine, the system was unable to clean the printheads fully. You should use the Troubleshooting Procedure to correct any image quality problems that may be apparent; alternatively, you should replace the printheads (see Printhead Replacement). You have replaced one or more printheads but the printer has detected that you do not have the right type of paper loaded for the alignment process. Press the Enter key to load the correct type of paper, or the Cancel key to stop the load process. For more Messages, click on the Next Page button